MEMS固体化学推进器设计与建模研究

尤 政; 张高飞; 林 杨; 任大海

doi:null

您当前的位置：

首页 >

文章列表页 >

MEMS固体化学推进器设计与建模研究

更新时间：2020-08-12

- MEMS固体化学推进器设计与建模研究
- Design and modeling of MEMS-based solid propellant propulsion
- 光学精密工程 2005年13卷第2期页码：117-126
- 作者机构：
  
  清华大学精密仪器与机械学系北京,100084
- 作者简介：
- 基金信息：
- DOI：
  中图分类号： V43;TN433
- 收稿日期：2005-02-22，
  
  修回日期：2005-03-28，
  
  网络出版日期：2005-04-30，
  
  纸质出版日期：2005-04-30
- 稿件说明：
移动端阅览
尤政, 张高飞, 林杨, 等. MEMS固体化学推进器设计与建模研究[J]. 光学精密工程, 2005,13(2):117-126.

YOU Zheng, ZHANG Gao-fei, LIN Yang, et al. Design and modeling of MEMS-based solid propellant propulsion[J]. Optics and precision engineering, 2005, 13(2): 117-126.
尤政, 张高飞, 林杨, 等. MEMS固体化学推进器设计与建模研究[J]. 光学精密工程, 2005,13(2):117-126. DOI：

YOU Zheng, ZHANG Gao-fei, LIN Yang, et al. Design and modeling of MEMS-based solid propellant propulsion[J]. Optics and precision engineering, 2005, 13(2): 117-126. DOI：

摘要

研制了一种基于MEMS(微机电系统)技术的固体化学微推进器。给出了推进器的结构设计、工艺流程

以及推进剂加注方法。建立了推进器点火过程热传导模型

利用该模型分析了不同因素对点火延迟时间的影响。同时

通过建立推进器性能模型

进行了推进单元推力和冲量的预测

给出了仿真结果。结果表明:减小点火电阻衬底材料的密度、热导率和比热可以减小点火延迟时间和点火功率;在一定条件下

增大喷管出口与喉部面积比能够提高推进器真空推力和冲量;MEMS在推进系统中的应用

能够满足微小型卫星对星载推进系统小型化、微推力、高精度的要求。

Abstract

MEMS-based solid propellant propulsion was developed.The structural design and fabrication process of the thruster

as well as the approach of propellant injection are presented. A thermal conduct model of ignition phase was established

with which the effect of various parameters on the ignition delay is analyzed. Meanwhile

the development of the model for performance simulation of micro thruster is described. The result indicates that low density

thermal conductivity and specific heat of substrate material of ignitor resistor can reduce the ignition delay time and power consumption; under certain condition

increasing the exit-to-throat section ratio of nozzle will help to raise the thrust and impulse bit of the propulsion in vacuum. It can be concluded that MEMS-based propulsion can meet the requirement of miniaturization

micro thrust and high accurate impulse bit for the propulsion system of micro satellite.

关键词

Keywords

references

. FLEETER R. Microspacecraft [M]. Reston, VA: The Edge City Press, 1995.

. AGRAWAL B N,OKANO S. Microelectro- mechanical systems for spacecraft applications . SPIE,2001,4746:1251-1257.

. GEORGE T. Overview of MEMS/NEMS technology development for space applications at NASA/JPL [J].SPIE,2003,5116:136-148.

. RACHEL L, KERRY L. Discussion of micro-newton thruster requirements for a drag-free control system . The 16th Annual AIAA/Utah State University Conference on Small Satellites. 2002.

. LEWIS D, JANSON S, COHEN R, et al. Digital micropropulsion [J]. Sensors and Actuators A: Physical, 2000, 80(2): 143-154.

. CHALONER C P, OLIVIER B A H. Advanced microsatellite mission-deep space applications and constraints . European Space Agency,2003.

. BECHTOLD T,RUDNYI E B,KORVINK J G.Automatic order reduction of thermo-electric model for microthruster ignition unit .Proc. of International Conference on Simulation of Semiconductor Processes and Devices,2002:131-134.

. 范存杰,李逢春. 微型固体火箭发动机用短点火延迟点火器研究[J]. 推进技术,1995,3:42-45. FAN C J,LI F CH. A study on igniter to shorten ignition delay time for micro-solid propellants rocket motor[J].Journal of Propulsion Technology,1995,3:42-45.

. 李宜敏,张中钦,张远君. 固体火箭发动机原理[M]. 北京: 北京航空航天大学出版社,1991. LI Y M,ZHANG ZH Q,ZHANG Y J.Solid propellant rocket elements[M].Beijing:Beijing Aeronautics and Astronautics University Press,1991.(in Chinese)

. SUTTON G. Rocket propulsion dlements: an introduction to the engineering of rockets [M]. New York: Wiley, 1992.

. 清华大学工程力学系. 流体力学基础(下册)[M]. 北京:清华大学,1994. Department of Engineering Mechanics,Tsinghua Univesity. Foundation of fluid mechanics(the second volume)[M].Beijing:Tsinghua University Press,1994.(in Chinese)

. ORIEUX S,ROSSI C,ESTEVE D. Compact model based on a lumped parameter approach for the prediction of solid propellant micro-rocket performance . Sensor and Actuators A: 2002, 202: 383-391.

浏览量

568

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

一种可直接脉冲调制的MEMS红外激发源

两侧下拉电极MEMS压控电容的分析和优化