光纤连接器端面研磨装置运动分析

刘德福; 段吉安; 钟 掘

doi:null

您当前的位置：

首页 >

文章列表页 >

光纤连接器端面研磨装置运动分析

更新时间：2020-08-12

- 光纤连接器端面研磨装置运动分析
- Motion analysis of lapping machine for end-face of optical fiber connector
- 光学精密工程 2006年14卷第2期页码：159-166
- 作者机构：
  
  中南大学机电工程学院,湖南长沙 410083
- 作者简介：
- 基金信息：
- DOI：
  中图分类号： TN253
- 收稿日期：2005-11-22，
  
  修回日期：2006-01-05，
  
  网络出版日期：2006-04-30，
  
  纸质出版日期：2006-04-30
- 稿件说明：
移动端阅览
刘德福, 段吉安, 钟掘. 光纤连接器端面研磨装置运动分析[J]. 光学精密工程, 2006,14(2):159-166.

LIU De-fu, DUAN Ji-an, ZHONG Jue. Motion analysis of lapping machine for end-face of optical fiber connector[J]. Optics and precision engineering, 2006, 14(2): 159-166.
刘德福, 段吉安, 钟掘. 光纤连接器端面研磨装置运动分析[J]. 光学精密工程, 2006,14(2):159-166. DOI：

LIU De-fu, DUAN Ji-an, ZHONG Jue. Motion analysis of lapping machine for end-face of optical fiber connector[J]. Optics and precision engineering, 2006, 14(2): 159-166. DOI：

摘要

分析了一种具有两个自由度的双驱动行星式光纤连接器端面研磨装置的运动原理

并求解出光纤连接器在研磨时相对于研磨盘(研磨砂纸)的运动轨迹。通过引入定义"速比"

建立了研磨装置两个独立主动件之间的转速关系。针对光纤连接器研磨中存在的问题

从速比入手

以运动轨迹曲线、研磨运动路程偏差、切削速度、速度周期变换系数为纽带

将研磨运动、研磨工艺以及研磨质量联系起来

得出了一组优化的光纤连接器研磨装置的运动参数。当系杆的转速设定为132 r/min时

根据粗、精研磨不同的工艺要求

其内齿轮的转速应在31~54 r/min调整。此时

速度周期变换系数小于2.2;运动路程偏差小于0.5%;研磨运动轨迹密集而不重复。实验证明了分析结果的正确。

Abstract

The motion principle of a two-motor driven lapping machine with an epicyclic gear and 2 degrees of freedom for Optical Fiber Connectors (OFC) was analyzed. The lapping motive path of OFC relative to lapping tool (lapping film) was also figured out. The rotating speed relationship between two independent driving components of lapping machine was established by introducing the definition on "velocity ratio". In order to solve the problems existing duration of lapping OFC

considering the velocity ratio and building relationship of lapping motion

lapping process and lapping quality

the optimal results of motion parameters of lapping machine for OFC were obtained with the aid of lapping motive path curves

lapping distance difference

cutting velocity and transform coefficient of velocity cycle. When rotating speed of the tie bar is 132 r/min

according to coarse or fine lapping processes

the rotating speed of the ring gear should be between 31~54 r/min. Here

the transform coefficients of velocity cycle and lapping distance differences are less than 2.2 and 0.5%

respectively

lapping motive paths are very dense and not overlapped. The analyzing results are proved by experimental results.

关键词

Keywords

references

. 黄尚廉,石文江,饶云江. 单模光纤连接损耗研究 . 光子学报,1994,23(2):127-132. HUANG SH L,SHI W J,RAO Y J.Study on connecting loss of single-mode optical fiber[J].Acta Photonica Sinica, 1994,23(2):127-132.(in Chinese)

. 毕卫红. 光纤连接器反射特性的研究[J]. 光电子·激光,1999,10(6):531-534. BI W H.Study of reflectance of optical fiber connectors[J].Journal of Optoeletronics·Laser,1999,10(6):531-534. (in Chinese)

. ROSA M D,CARBERRY J,BHAGAVATULA V,et al.High-power performance of single-mode fiber-optic connectors[J].Journal of Lightwave Technology,2002,20(5):879-885.

. TAKAHASHI M.Elastic polishing plate method and conditions for forming angled convex surface on ferrule end-face[J].Journal of Lightwave Technology,1997,15(9):1675-1680.

. LIN S I-EN.Effect of polishing conditions on terminating optical connectors with spherical convex polished ends[J].Applied Optics,2002,41(1): 88-95.

. 杨福兴. 光纤连接器超精密加工技术的研究[J]. 航空精密制造技术,2003,39(3):1-3. YANG F X.Study on ultraprecision machining technique of optical fiber connectors[J].Aviation Precision Manufacture Technology,2003,39(3):1-3.(in Chinese)

. YIN L,HUANG H,CHEN W K,et al.Polishing of fiber optic connectors[J].International Journal of Machine Tools & Manufacture,2004,44:659-668.

. 刘德福,段吉安. 光纤端面研磨加工机理研究[J]. 光学精密工程,2004,12(6):570-575. LIU D F,DUAN J A.Mechanism research on lapping of optical fiber end-face[J].Optics and Precision Engineering,2004,12(6):570-575.(in Chinese)

. YANG J D,WEN X H,ZHU Y Q,et al.Discussing on solid abrasive lapping path[J].Chinese Journal of Mechanical Engineering,1997,10(2):101-105.

. 张红霞,吴明根,高红刚. 定偏心锡磨盘超精密平面抛光均匀去除模拟计算[J]. 光学精密工程,1998,6(2):77-82. ZHANG H X,WU M G,GAO H G.Simulation of even material removal during eccentric plane polishing by a tinpolisher[J].Optics and Precision Engineering,1998,6(2):77-82.(in Chinese)

. UHLMANN E,ARDELT T.Influence of kinematics on the face grinding process on lapping machines[J]. Annals of the CIRP,1999,48(1):281-284.

. 孙新民,李树文,王永梁. 四轴球体研磨机实现球体均匀研磨的充分必要条件[J]. 光学精密工程,1999,7(1):70-74. SUN X M,LI SH W,WANG Y L.Full conditions of the uniform lap for the four shafts ball-lapping machine[J].Optics and Precision Engineering,1999,7(1):70-74.(in Chinese)

. 吴宏基,曹利新,刘健. 基于行星式平面研磨机研抛过程的运动几何学分析[J]. 机械工程学报,2002,38(6):144-147. WU H J,CAO L X,LIU J.Analysis of kinematic geometry on face grinding process on lapping machines[J].Chinese Journal of Mechanical Engineering,2002,38(6):144-147.(in Chinese)

. SHINTAKU T,SUGITA E,NAGASE R.Highly stable physical-contact optical fiber connectors with spherical convex ends[J].Journal of Lightwave Technology,1993,11(2):241-248.

. CHANG K Y,SONG Y H,LIN T R.Analysis of lapping and polishing of gauge block[J].The International Journal of Advanced Manufacturing Technology,2002,20:414-419.

. HUANG H,CHEN W K,YIN L,et al.Micro/meso ultra precision grinding of fibre optic connectors[J].Precision Engineering,2004,28:95-105.

浏览量

531

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

暂无数据