GAO Z K,LIU J,GAO T.Advanced inside-furnace monitoring techniques implemented on the new largr blast furnace of shagang [J]. AISTech Iron Steel Technol.Conf.Proc,2010:565-571.

CHEN X Z, LIU F M, HOU Q W, et al.. Industrial high-temperature radar and imaging technology in blast furnace burden distribution monitoring process [J].ICEMI,2009:599-603.

MAYSUI Y, KASAI A, ITO K, et al.. Stabilizing burden trajectory into blast furnace top under high ore to coke ratio operation [J]. ISIJ International, 2003, 27(8):1159-1166.

NAG S, KORANNE V M. Development of material trajectory simulation model for blast furnace compact bell-less top [J]. Ironmaking and Steelmaking, 2009, 36(5):371-378.

ZHENG Y F, SATORU I, SHUNGO N, et al.. Influence of blast furnace inner volume on solid flow and stress distribution by three dimensional discrete element method [J]. ISIJ International, 2010,50:1406-1412.

安剑奇,吴敏,何勇,等. 基于两级信息融合的高炉料面煤气流分布检测方法[C]. 第29届中国控制会议,北京, 2010:5660-5665. AN J Q,WU M,HE Y, et al.. Detection method of gas flow distribution of burden surface based on two-stage information fusion [N].Proceedings of the 29th Chinese control conference. Beijing, 2010:5660-5665. (in Chinese)

裴闯,蒋晓瑜,王加,等. 自然彩色化双通道实时图像融合系统[J]. 光学 精密工程,2013,21(5):1333-1339. PEI CH, JIANG X Y, WANG J, et al.. Dual-channel real-time image fusion system with nature color [J]. Opt.Precision Eng., 2013,21(5):1333-1339.(in Chinese)

韩辅君,徐静,宋世忠. 基于低成本多传感器的自适应组合滤波[J]. 光学 精密工程,2011,19(12):3007-3015. HAN F J,XU J,SONG SH ZH. Adaptive attitude estimation filtering with low-cost multi-sensors for MAHRS [J]. Opt.Precision Eng.,2011,19(12):3007-3015.(in Chinese)

HE J P, TU Y Y, SHI Y Q.Fusion Model of Multi Monitoring Points on Dam Based on Bayes Theory [J]. Procedia Engineering, 2011:2133-2138.

成兰伯. 高炉炼铁工艺及计算[M]. 北京:冶金工业出版社,1991. CHENG L B. Blast furnace ironmaking process and calculation [M]. Beijing:Metallurgical Industry Press.1991. (in Chinese)

梁凯,潘泉,宋国明,等. 多传感器时间对准方法的研究[J]. 陕西科技大学学报,2006. LIANG K,PAN Q,SONG G M,et al.. Research on multi-sensor time alignment method [J]. Journal of Shanxi University of Science & Technology,2006.(in Chinese)

祝乔,程汉卿,尹怡欣,等. 基于多点雷达和最小二乘法估计高炉料面形状[J]. 北京科技大学学报,2012(9):1061-1064. ZHU Q,CHENG H Q,YIN Y X,et al.. Estimating the burden surface profile of a blast furnace based on multi-radar measurement and least squares approximations [J]. Journal of University of Science and Technology Beijing, 2012(9):1061-1064. (in Chinese)

刘云彩. 高炉布料规律[M]. 3版.北京:冶金工业出版社,2006. LIU Y C. Regularity of burden distribution in blast furnace[M]. 3nd Ed. Beijing:Metallurgical Industry Press, 2006. (in Chinese)

张航,郭蕴博,陈骁,等. 颗粒物质在冲击作用下的堆积分布[J]. 物理学报,2007,56(4):2031. ZHANG H, GUO Y B, CHEN X, et al.. The distribution of a granular pile under impact [J]. ActaPhysicaSinica, 2007,56(4):2031. (in Chinese)

吴小俊, 曹奇英, 陈保香, 等. 基于Bayes估计的多传感器数据融合方法研究[J]. 系统工程理论与实践,2000,7:45. WU X J, CAO Q Y, CHEN B X, et al.. Study on multisensor data fusion methods based on bayes estimation [J].Systems Engineering Theory and Practice,2000,7:45. (in Chinese)

陈令坤, 于仲洁, 周曼丽,等. 高炉布料数学模型的开发及应用[J]. 钢铁,2006,41(11):13. CHEN L K, YU ZH J, ZHOU M L, et al.. Development and application of blast furnace burden distribution model [J]. Iron and Steel,2006,41(11):13. (in Chinese)