LI Jia-wen, CHEN Yu-hang, HU Yan-lei etc. Automatic nano-positioning system based on two-dimensional zero-reference gratings[J]. Editorial Office of Optics and Precision Engineering, 2014,22(9): 2444-2450
LI Jia-wen, CHEN Yu-hang, HU Yan-lei etc. Automatic nano-positioning system based on two-dimensional zero-reference gratings[J]. Editorial Office of Optics and Precision Engineering, 2014,22(9): 2444-2450 DOI: 10.3788/OPE.20142209.2444.
Automatic nano-positioning system based on two-dimensional zero-reference gratings
An automatic positioning system using a pair of two-dimensional (2-D) zero-reference gratings was established to implement the nano-positioning in 2D directions. Firstly
the 64 64 coded 2-D zero-reference gratings with a grid width of 5
m was designed and fabricated. Then
the photoelectric conversion circuit and control circuit were built for the automatic nano-positioning system to implement data acquisition
display and motion control and other functions. Finally
an automatic positioning algorithm using an integral method was proposed to achieve the automatic positioning in 2D directions. The results show that the system positioning speed depends on the transmittance of light intensity distribution and the positioning success rate is related to the starting position. If the starting position is located in the central circular area with a radius of 2.5
m
this equipment may achieve nanoscale positioning. If the starting position is located in the central circular area with a radius range of 5-200
m
the automatic alignment may present blind spots. In this case
the starting positions should be changed to perform the positioning process again and the alignment will be achieved successfully.
关键词
Keywords
references
王国彪. 纳米制造前沿综述[M]. 北京:科学出版社, 2009. WANG G B. Summary Nanometer Manufacturing Frontier [M]. Beijing:Science Press, 2009. (in Chinese)
刘震, 尚砚娜. 多尺度光点图像中心的高精度定位[J]. 光学 精密工程,2013,21(6):1586-1591. LIU ZH, SHANG Y N. High precision location for multi-scale light spot center[J].Opt. Precision Eng.,2013,21(6):1586-1591. (in Chinese)
李伟,高思田,卢明臻, 等. 计量型原子力显微镜的位移测量系统(英文) [J]. 光学 精密工程,2012,20(4):797-802. LI W,GAO S T,LU M ZH, et al.. Position measuring system in metrological atomic force microscope. [J]. Opt. Precision Eng., 2012,20(4):797-802.
朱江平, 胡松, 于军胜,等. 光刻对准中掩膜光栅标记成像标定方法[J]. 中国激光, 2013. ZHU J P, HU S,YU J SH, et al.. Calibration method for mask grating mark imaging in lithography alignment[J]. Chinese Journal of Lasers, 2013,40(1):0108002. (in Chinese)
NIU D, LI J, CHEN Y, et al.. Comparative study on the nonperiodic and periodic gratings for scanning probe microscopy drift measurements[J]. Journal of Vacuum Science & Technology B:Microelectronics and Nanometer Structures, 2010,28:1070-1072.
周成刚,叶锡标,张阳,等. 基于二维零位光栅的高精度平面定位系统[J]. 纳米技术与精密工程, 2006,4(3):190-194. ZHOU C G, YE X B, ZHANG Y,et al.. A two-dimensional zero-reference grating-based high-precision planar positioning system[J]. Nanotechnology and Precision Engineering, 2006, 4(3):190-194. (in Chinese)
SEZ-LANDETE J, ALONSO J, BERNABEU E. Design of two-dimensional zero reference codes by means of a global optimization method[J]. Opt. Express, 2005;13:4230-6.
SEZ-LANDETE J, SALCEDO-SANZ S, ROSA ZURERA M, et al.. Design of two-dimensional zero reference codes with a genetic algorithm[J]. Opt. Lett., 2006,31:1648-50.
CHEN J C, WANG S H, LEE M K, et al.. Cross-entropy method for the optimization of optical alignment signals with diffractive effects[J]. J. Lightwave Technol., 2011,29:2706-14.
ZHOU W Y, CHEN Y H, HUANG W H. Alignment measurement of two-dimensional zero-reference marks[J]. Precision Engineering, 2006,30:238-41.
SEZ-LANDETE J, SALCEDO-SANZ S, CRUZ-ROLDN F, et al.. Design of two-dimensional optical alignment signals robust to diffractive effects[J]. J. Lightwave Technol., 2008,26:1702-7.
SU Y S, TONGUZ O K. Robust design of two-dimensional optical reference signals against diffraction effects[J]. J. Lightwave Technol., 2012,30:2168-75.
Automatic assembly and adjustment system for target surface of CMOS circuit board of star sensor
Correction model for visible light polarization imaging considering non-ideality of polarizers
Sidewall precision analysis of metal part formed by selective laser melting
Optimization of structural parameters of binocular vision system in remote 3-D coordinate measurement
Analysis of position estimation precision by cooperative target with three feature points
Related Author
WANG Xiaodong
KONG Shuai
CUI Can
SHI Quan
ZHANG Guorui
CAO Rungu
REN Tongqun
Su QIU
Related Institution
Beijing Institute of Aerospace Control Devices
Dalian University of Technology,Key Laboratory for Micro/Nano Technology and System of Liaoning Province
Dalian University of Technology,State Key Laboratory of High-performance Precision Manufacturing
Key Laboratory of Optoelectronic Imaging Technology and System of Ministry of Education, School of Optics and Photonics, Beijing Institute of Technology
School of Mechanical & Automotive Engineering, South China University of Technology