浏览全部资源
扫码关注微信
1.中国科学院 长春光学精密机械与物理研究所, 吉林 长春 130033
2.中国科学院大学, 北京 100049
[ "原帅(1991-), 男, 河南林州人, 2014年于华中科技大学获得学士学位, 主要从事地基大口径望远镜主镜支撑系统的结构设计和分析.E-mail:yuansam@foxmail.com" ]
王富国(1979-), 男, 山东单县人, 博士, 研究员, 硕士生导师, 主要研究方向为大型望远镜光机系统的设计与仿真.E-mail:wfg109@163.com WANG Fu-guo, E-mail:wfg109@163.com
收稿日期:2017-05-22,
录用日期:2017-6-21,
纸质出版日期:2017-10-25
移动端阅览
原帅, 张景旭, 王富国, 等. 大口径主镜的侧向定位系统[J]. 光学 精密工程, 2017,25(10):2564-2571.
Shuai YUAN, Jing-xu ZHANG, Fu-guo WANG, et al. Lateral positioning system for large aperture primary mirror[J]. Optics and precision engineering, 2017, 25(10): 2564-2571.
原帅, 张景旭, 王富国, 等. 大口径主镜的侧向定位系统[J]. 光学 精密工程, 2017,25(10):2564-2571. DOI: 10.3788/OPE.20172510.2564.
Shuai YUAN, Jing-xu ZHANG, Fu-guo WANG, et al. Lateral positioning system for large aperture primary mirror[J]. Optics and precision engineering, 2017, 25(10): 2564-2571. DOI: 10.3788/OPE.20172510.2564.
针对采用Whiffletree式底支撑和推拉平衡重式侧支撑的大口径主镜在主镜室中的准确定位,基于运动学约束原理提出了一种大口径主镜侧向定位方法。介绍了运动学约束的基本原理,提出了一套主镜侧向定位系统实现方案,包括定位点位置的选取、柔性铰链和定位基座的设计,并设计了一种侧向定位系统。利用有限元方法,分析了设计的侧向定位系统对大口径主镜系统的位置、谐振频率和镜面面形精度等方面的影响。结果表明,使用该侧向定位系统的整个主镜系统谐振频率达到13.6 Hz,光轴水平时主镜沿
Y
轴方向的平均位移为-355.863 nm,镜面面形未受影响,所有指标均满足设计要求。实验结果验证了提出的主镜侧向定位系统设计方案对大口径望远镜主镜的支撑和定位系统设计具有工程指导意义。
To locate accurately a large aperture primary mirror with balance weight support and Whiffletree support in the primary mirror cell
a lateral positioning method for the large aperture primary mirror was proposed based on the kinematic constraint. The principle of kinematic constraint was introduced
a design scheme of lateral positioning system for the primary mirror was proposed including the selection of location points and the design of flexure hinges and location bases
and then a lateral positioning system was implemented. With finite element method
the influences of the lateral positioning system on the large aperture primary mirror system was analyzed in several aspects
such as system location
resonant frequency and mirror surface profile. As the results
it shows that the resonant frequency of the primary mirror reaches 13.6 Hz
the average displacement of the primary mirror is-355.863 nm along the
Y
-axis direction
and the primary mirror surface profile is uninfluenced. These parameters all meet the design requirements of this lateral positioning system. Experimental results verify the engineering signification of proposed lateral positioning system on the design of support and position systems of primary mirror in large aperture telescopes in the future.
张景旭.地基大口径望远镜系统结构技术综述[J].中国光学, 2012, 5(4): 327-336.
ZHANG J X. Overview of structure technologies of large aperture ground-based telescopes[J]. Chinese Optics, 2012, 5(4):327-336. (in Chinese)
程景全.天文望远镜原理和设计——射电、红外、光学、X射线和γ射线望远镜[M].北京:中国科学技术出版社, 2003.
CHENG J Q. Principles of Astronomical Telescope Design[M]. Beijing: Science and Technology of China Press, 2003. (in Chinese)
BELY P Y. The Design and Construction of Large Optical Telescopes[M]. Berlin: Springer-Verlag, 2003.
赵宏超, 张景旭, 杨飞, 等. 30 m望远镜三镜系统运动学接口设计及分析[J].光学学报, 2015, 35(3): 0312003.
ZHAO H C, ZHANG J X, YANG F, et al.. Kinematic coupling design and analysis for 30 m telescope tertiary mirror system[J]. Acta Optica Sinica, 2015, 35(3):0312003. (in Chinese)
KRABBENDAM V L. The large synoptic survey telescope concept design overview[J]. SPIE, 2008, 7012: 701205.
陈晓丽, 王彬, 杨秉新.大口径超轻型反射镜定位和支撑方案研究[J].航天返回与遥感, 2010, 31(3): 15-20.
CHEN X L, WANG B, YANG B X. Study of positioning and mounting scheme of large aperture ultra-light space reflector[J]. Spacecraft Recovery & Remote Sensing, 2010, 31(3): 15-20. (in Chinese)
杨飞, 张景旭.大口径望远镜主镜中心定位机构研究[J].激光与光电子学进展, 2011, 48(3): 032202.
YANG F, ZHANG J X. Central hub radial support of primary mirror in large aperture telescope[J]. Laser & Optoelectronics Progress, 2011, 48(3): 032202. (in Chinese)
邵亮, 吴小霞, 陈宝刚, 等. SiC轻量化主镜的被动支撑系统[J].光学 精密工程, 2015, 23(5): 1380-1386.
SHAO L, WU X X, CHEN B G, et al.. Passive support system of light-weighted SiC primary mirror[J]. Opt. Precision Eng., 2015, 23(5): 1380-1386. (in Chinese)
王富国, 杨洪波, 赵文兴, 等. 1.2 m SiC主镜轻量化设计与分析[J].光学 精密工程, 2009, 17(1): 85-91.
WANG F G, YANG H B, ZHAO W X, et al.. Lightweight design and analysis of a 1.2 m SiC primary mirror[J]. Opt. Precision Eng., 2009, 17(1): 85-91. (in Chinese)
申永胜.机械原理教程[M]. 2版.北京:清华大学出版社, 2005.
SHEN Y SH. Theory of Machines and Mechanisms[M]. 2nd ed.. Beijing: Tsinghua University Press, 2005. (in Chinese)
YODER JR P R. Opto-Mechanical Systems Design[M]. 3rd ed.. Boca Raton: CRC Press, 2006.
范磊. 2 m级地基望远镜SiC主镜轻量化设计及支撑技术研究[D]. 长春: 中国科学院研究生院(长春光学精密机械与物理研究所), 2013. http://cdmd.cnki.com.cn/Article/CDMD-80139-1013293657.htm
FAN L. Research on the Lightweight Design and Support of the 2m-SiC Primary Mirror for Ground-Based Telescope[D]. Changchun: Changchun Institute of Optics, Fine Mechanics and Physics, Graduate University of Chinese Academy of Sciences, 2013. (in Chinese)
闫勇, 王栋, 金光.大口径SiC反射镜组件研制技术[J].光电工程, 2010, 37(6): 108-112.
YAN Y, WANG D, JIN G. Design and fabrication technology of large aperture SiC mirror assembly[J]. Opto-Electronic Engineering, 2010, 37(6): 108-112. (in Chinese)
0
浏览量
249
下载量
3
CSCD
关联资源
相关文章
相关作者
相关机构