YU Fan, LI De-hua, XUE Lei . Electromagnetic compatibility design in optics and image processing equipment[J]. Editorial Office of Optics and Precision Engineering, 2004,(1): 100-106
YU Fan, LI De-hua, XUE Lei . Electromagnetic compatibility design in optics and image processing equipment[J]. Editorial Office of Optics and Precision Engineering, 2004,(1): 100-106DOI:
Electromagnetic compatibility design in optics and image processing equipment
In order to improve the precision of 3D model obtained
suggestions were made for the elimination of electromagnetic interference signals on optics and image processing equipment. The alternator servo was first identified as the electromagnetic interference source through amplitude and frequency screening
the coupling path was then determined by calculating the interference voltage in the equipment grounding loop
and the CCD camera was finally identified as the sensitive interference receiver through comparison of components' sensitivity indexes. Electromagnetic compatibility designs were made one after another against the equipment electromagnetic compatibility specifications through analyses and calculations and by grounding
isolating
filtering and shielding.
关键词
Keywords
references
OSBURN D M.The role of systems EMC analysis in large system EMC management by equipment EMC assurance[C]. Electromagnetic Compatibility, 1991. Symposium Record. IEEE 1991 International Symposium on,1991:189-192.
MILICAN P G, NESBIT T. A low cost EMC test system using the `Golden Product' test method[C]. Low Cost EMC Testing, IEE Colloquium on, Sep,21, 1993.
李德华,胡汉平,金刚.从平面到立体-三维扫描技术[J].计算机世界,1999,7(751),3-5.LI D H, HU H P, JIN G. From plane to solid-technology of the 3D scanning [J]. Computer World.1999,7(751):3-5(in Chinese).
白同云,吕晓德. 电磁兼容设计[M].北京:北京邮电大学出版社,2001.BAI T Y,LU X D. The design of electromagnetic compatibility[M]. Beijing: The Press Inc. of Beijing University of Posts and Telecommunications. 2001.(in Chinese).
亨利 W O. 电子系统噪声抑制技术[M]. 北京:人民铁道出版社,1978.HENRY W O. Noise suppression technology in electronic system[M].Beijing: The Press Inc. of the People Railway, 1978.(in Chinese)
刘鹏程,邱扬. 电磁兼容原理及技术[M].北京:高等教育出版社,1993.LIU P CH, QIU Y. Theory & Technology of EMC[M]. Beijing: The Press Inc. of Higher Education,1993.(in Chinese)
林国荣. 电磁干扰及控制[M].世界图书出版公司,1990.LIN G R. EMC interfere & control[M]. The Press Inc. of the World Books.1990.(in Chinese)
薛雷,李德华,何笑明,等. 图像处理设备的电磁兼容预测与工程应用[J].武汉大学学报(理学版),2003,2,121-126.XUE L,LI D H,HE X M,et al. Prognostication and engineering application of electromagnetic compatibility for image processing equipment[J]. Journal of Wuhan University,2003,2,121-126.(in Chinese)
王定华,赵家升. 电磁兼容原理与设计[M].西安:电子科技大学,1995.WANG D H, ZHAO J SH. The principles and design of EMC[M]. Xi'an: The Press Inc. of the Univ. of Electronic Sci. and Tech.1995.(in Chinese)
Bernhard Keiser. 电磁干扰与防护[M].北京:世界图书出版社,1990.KEISER B.EMC Interfere & defending[M]. Beijing:The Press Inc. of the World Books.1990.(in Chinese)
蔡仁钢. 电磁兼容原理、设计和预测技术[M].北京:北京航空航天大学出版社,1997.CAI R G.EMC theory, design and forecasting[M]. Beijing: The Press Inc. of the Beijing Univ. of Aeronautics & Astronautics.1997.(in Chinese)
程淑凤,马蔚宇,马晓庆. 电磁兼容试验技术[M]. 北京:北京邮电大学出版社,2001.CHENG SH F, MA W Y, MA X Q. EMC examining technology [M]. Beijing : The Press Inc. of the Beijing Univ. of Posts & Telecommunications,2001.(in Chinese).
Keith Armstrong. Best EMC practices for electrical and electronic assembly and installation[C]. Electromagnetic Compatibility in Heavy Power Installations, IEE Colloquium, 1999.
佟受峰,阮锦,郝志航.CCD图像传感器降噪技术的研究[J]. 光学精密工程,2000,8(2):140-145.TONG SH F,RUAN J,HAO ZH H. Noise reducing scheme on output signal of CCD[J]. Optics and Precision Engineering, 2000,8(2):140-145(in Chinese)
邹璇,李德华. 多关节机械臂的坐标模型和参数标定[J]. 光学精密工程,2001,9(3):252-256.ZHOU X, LI D H. Coordinate model and calibration algorithm of multi-joint arm[J].Optics and Precision Engineering, 2001,9(3):252-256.(in Chinese)