Multiframe postprocessing algorithm of laser active imaging images
|更新时间:2020-08-12
|
Multiframe postprocessing algorithm of laser active imaging images
Optics and Precision EngineeringVol. 15, Issue 4, Pages: 615-621(2007)
作者机构:
1. 中国科学院 长春光学精密机械与物理研究所,吉林 长春,中国,130033
2. 空军航空大学 基础部,吉林 长春 130033
3. 吉林省探矿机械厂 经营计划科,吉林 长春 130012
4. 青岛大学 信息工程学院,山东 青岛 266071
作者简介:
基金信息:
DOI:
CLC:TP391.4
Received:22 November 2006,
Revised:18 March 2007,
Published Online:30 April 2007,
Published:30 April 2007
稿件说明:
移动端阅览
WANG Zhi, JIA Shu-hong, ZHANG Xiao-hui, et al. Multiframe postprocessing algorithm of laser active imaging images[J]. Optics and precision engineering, 2007, 15(4): 615-621.
DOI:
WANG Zhi, JIA Shu-hong, ZHANG Xiao-hui, et al. Multiframe postprocessing algorithm of laser active imaging images[J]. Optics and precision engineering, 2007, 15(4): 615-621.DOI:
Multiframe postprocessing algorithm of laser active imaging images
parameters of received optical system and the geometrical configuration between laser and received optical system
a faint target image of longer range with higher resolution obtained by active imaging system is constrained by imaging and processing technologies. With longer range and limited laser energy
it is impossible to illuminate the entire scene at once
and the illuminance obtained by each receiver pixel of CCD can not achieve an adequate level. In order to increase the imaging range of imaging system with given per-pulse laser energy
and to reduce atmospheric turbulence effects on image resolution
multi pulses may be employed to obtain image data over the whole scene and radiometric conceptions are used to establish the maximum scene illumination region during each exposure.A unique multiframe postprocessing technique is investigated in this paper. It is shown that in the presence of atmospheric turbulence and coherent speckle effects
this approach can produce superior results to conventional scene flood illumination.