Design and experiment of tracking and detecting system for azimuth
|更新时间:2020-08-12
|
Design and experiment of tracking and detecting system for azimuth
Optics and Precision EngineeringVol. 15, Issue 5, Pages: 741-745(2007)
作者机构:
1. 中国科学院 研究生院 北京,100039
2. 中国科学院 长春光学精密机械与物理研究所,吉林 长春,中国,130033
作者简介:
基金信息:
DOI:
CLC:V556.5
Received:18 February 2007,
Revised:14 April 2007,
Published Online:30 May 2007,
Published:30 May 2007
稿件说明:
移动端阅览
XIAO Ying, JIN Long-xu. Design and experiment of tracking and detecting system for azimuth[J]. Optics and precision engineering, 2007, 15(5): 741-745.
DOI:
XIAO Ying, JIN Long-xu. Design and experiment of tracking and detecting system for azimuth[J]. Optics and precision engineering, 2007, 15(5): 741-745.DOI:
Design and experiment of tracking and detecting system for azimuth
A system for tracking and detecting flying object rapidly and exactly is designed and the accurate azimuth of the flying object is obtained synchronously. In this system
the azimuth error signal from detecting devices drives a servo running flat with detecting devices and an H-type bipolar PWM project is used in driving subsystem to drive DC motor in the servo running flat to improre response speed. A speed-detected motor is used to get speed feedback signal for better stability. A high precision encoder is adopted to get azimuth signal of flying object for higher measure precision. For analysis on system dynamic transfer function
the dynamic curve is emulated and dynamic parameter is calculated
also switch frequency and delay time are given. Displacement curve and speed curve of step response and other results of the system are obtained by experiment. The results indicate that the system can meet the technique requirements
it shows the excellent parameter in dynamic precision of 0.1°
max tracking velocity of 38.3 (°)/s and max tracking acceleration of 23.5 (°)/s