Realization of high division number of coarse grating signals by fully digital processing method
|更新时间:2020-08-12
|
Realization of high division number of coarse grating signals by fully digital processing method
Optics and Precision EngineeringVol. 15, Issue 2, Pages: 283-288(2007)
作者机构:
四川大学 制造科学与工程学院,四川 成都,610065
作者简介:
基金信息:
DOI:
CLC:TH741.6
Received:10 July 2006,
Revised:11 December 2006,
Published Online:20 February 2007,
Published:20 February 2007
稿件说明:
移动端阅览
LUO Hua, GAO Shan, LI Xiang-long. Realization of high division number of coarse grating signals by fully digital processing method[J]. Optics and precision engineering, 2007, 15(2): 283-288.
DOI:
LUO Hua, GAO Shan, LI Xiang-long. Realization of high division number of coarse grating signals by fully digital processing method[J]. Optics and precision engineering, 2007, 15(2): 283-288.DOI:
Realization of high division number of coarse grating signals by fully digital processing method
To meet the requirement of high accuracy measurement in coarse grating system
a fully digital processing method is presented
which consists of digital filter
digital error compensation and software digital subdivision. Two signals are filtered by digital filter in order to get waveforms closed to the ideal state and then
by analyzing the software digital subdivision theory
the expressions are deduced to verify how errors influence on the subdivision result. The errors include quadrature phase shift error
unequal amplitude error
zero offsets and the third harmonic. As a result
corresponded digital compensation methods are proposed. Finally
digital subdivision is adopted to obtain high division number. Simulation is employed to validate that the FIR digital band pass filter based on strict linear phase can effectively shield the noises in both high and low frequency bands
which are involved in signal spectra of grating. Experiment results indicate that fully digital method can raise division number to 500 with the precondition of coarse grating quality.
关键词
Keywords
references
. 林鹏,陈小强,袁祥辉. 粗光栅位移测量系统细分误差的来源与消除分析[J]. 现代计量测试,1996,(1):42-50. LIN P, CHEN X Q, YUAN Z H. Analysis on source and elimination of the subdivision error of coarse grating displacement measuring system[J]. Mod. Meas. Test, 1996,(1): 42-50. (in Chinese)
. 喻洪麟,黄良明,王远干. 莫尔条纹信号的DSP滤波及细分技术研究[J]. 光电工程,2004,31(9):61-65. YU H L, HUANG L M, WANG Y G. Study on DSP filter and subdivision of moiré fringes signal[J]. Opto-electron. Eng.,2004, 31(9): 61-65. (in Chinese)
. SANJIT K M. 数字信号处理[M]. 电子工业出版社,2005. SANJIT K M. Digital signal processing [M]. Publishing House of Electronics Industry, 2005. (in Chinese)
. KAMEN E W, HECK B S. Fundamentals of signals & systems using MATLAB[M]. New York: Prentice-Hall Publishing Company, 1997.
. 余文新,胡小唐,邹自强. 一种高分辨率和高频响的光栅纳米测量细分方法[J]. 天津大学学报,2002,35(1):1-4. YU W X, HU X T, ZHOU Z Q. A subdivision method with high resolution and high response speed in grating-based nano metrology[J]. J. Tianjin Univ., 2002, 35(1): 1-4. (in Chinese)
. 李江国,宣明,王一凡. 莫尔条纹细分中相位误差的软件补偿方法[J]. 光学 精密工程,1995,3(1):69-73. LI J G, XUAN M, WANG Y F. Software compensation method of phase error in Morie’strip division[J]. Opt. Precision Eng., 1995, 3(1): 69-73. (in Chinese)
. 杨进堂. 用移相比相法动态测量莫尔条纹细分误差 . 光学 精密工程,1997,5(2):104-108. YANG J T. Moire fringe subdivided error measured by using the comparison phase method of phase shift[J]. Opt. Precision Eng., 1997, 5(2): 104-108. (in Chinese)
. 李开龙,魏彪,米德伶. 基于FPGA的工业X-CT2代扫描运动控制卡设计[J]. 光学 精密工程,2005,13(增):168-172. LI K L,WEL B,MI D L. Design of the 2nd generaton scanning motion control card based on FPGA for industrial X-CT[J]. Opt. precisio Eng.,2005,13(supp.):168-172.(in Chinese)
. 马姝琳,钟先信,姚富光. 基于DM642EVM的PCI总线实时数据通信技术[J]. 光学 精密工程,2005,13(增):196-200. MA S L,ZHOU G X,YAO F G.Real-time data communication based on PCI of DM642EVm[J].Opt. precisio Eng.,2005,13(supp.):196-200.(in Chinese)
. 孙立宁,马立,荣伟彬. 一种纳米级二维微定位工作台的设计与分析[J]. 光学 精密工程,2006,14(3):407-411. SUN L N,MA L,RONG W B. Design and analysis on a 2-DOF nano-positioning stage[J]. Opt. precisio Eng.,2006,14(3):407-411.(in Chinese)