Piezoelectric type nozzle flapper valve and its control method
|更新时间:2020-08-12
|
Piezoelectric type nozzle flapper valve and its control method
Optics and Precision EngineeringVol. 15, Issue 3, Pages: 372-377(2007)
作者机构:
1. 吉林大学 通信工程学院,吉林 长春,中国,130012
2. 吉林大学 机械科学与工程学院,吉林 长春,130025
作者简介:
基金信息:
DOI:
CLC:TN384;TP273
Received:22 July 2006,
Revised:18 December 2006,
Published Online:30 June 2007,
Published:30 June 2007
稿件说明:
移动端阅览
ZHOU Miao-lei, YANG Zhi-gang, TIAN Yan-tao, et al. Piezoelectric type nozzle flapper valve and its control method[J]. Optics and precision engineering, 2007, 15(3): 372-377.
DOI:
ZHOU Miao-lei, YANG Zhi-gang, TIAN Yan-tao, et al. Piezoelectric type nozzle flapper valve and its control method[J]. Optics and precision engineering, 2007, 15(3): 372-377.DOI:
Piezoelectric type nozzle flapper valve and its control method
A novel piezoelectric type nozzle flapper hydroelectric servo valve was developed and its control method was researched. A double nozzle baffle amplifier was designed as the prestage actuator of the double nozzle flapper hydroelectric servo valve by the low cost bimorph bend component
then the principle of the novel piezoelectric type nozzle flapper hydroelectric servo valve was introduced. Finally
for the hysteresis and creep nonlinearities of the piezoelectric component and time variation factors of the system
a single nerve-cell adaptive PSD intelligent control method was presented. Experimental results show that the overshoot and the setting time of the step respond under the PID control method is 7.9% and 0.13 s
respectively
but the overshoot and the setting time of the step respond under the proposed control method is 2.4% and 0.07 s. It is proved that the proposed control method is validaty. Experimental results also indicate that the novel piezoelectric type nozzle flapper hydroelectric servo valve has advantages in simple structure
low cost and high precision
it can meet the need of high precise control system in the recent period.
关键词
Keywords
references
. 李其朋,丁凡. 电液伺服阀技术研究现状及发展趋势 . 工程机械,2003,34(6): 28-33. LI Q P, DING F. Current situations and development trend of the research of electro-hydraulic servo valve technique[J]. Constr. Mach. Equip., 2003, 34(6): 28-33. (in Chinese)
. 程光明,李鹏,杨志刚,等. 压电驱动式双喷嘴挡板电液伺服阀[J]. 光学 精密工程,2005, 13(3): 276-282. CHENG G M, LI P, YANG ZH G, et al.. Double nozzle piezoelectric servo valve . Opt. Precision Eng., 2005, 13(3): 276-282. (in Chinese)
. 张涛,孙立宁,蔡鹤皋. 压电陶瓷基本特性研究[J]. 光学 精密工程,1998,6(5): 26-32. ZHANG T, SUN L N, CAI H G. Study on the fundamental characteristics of piezoelectric element[J]. Opt. Precision Eng., 1998, 6(5): 26-32. (in Chinese)
. 赵宏伟,孙立宁,张涛,等. 压电陶瓷驱动器在机器人柔性臂应用中的研究[J]. 压电与声光,2000,22(3): 173-176. ZHAO H W, SUN L N, ZHANG T, et al.. The research of flexible manipulator driven by piezoelectric actuators[J]. Piezoelectr.Acoustoopt., 2000, 22(3): 173-176. (in Chinese)
[5]. YU Y H, XIAO Z CH, NAGANTHAN N G, et al.. Dynamic Preisach modeling of hysteresis for the piezoceramic actuator system[J]. Mech. Mach. Theory, 2002, 37(1): 75-89.
. 吴建华,褚家如. 一种压电驱动微操作器及其释放位置精度分析[J]. 光学 精密工程,2005,13(3): 283-290. WU J H, CHU J R. Piezoelectric driven micromanipulator and its positioning accuracy analysis[J]. Opt. Precision Eng., 2005, 13(3): 283-290. (in Chinese)
. 史维祥,杜彦亭. 电液伺服系统自适应控制的新发展 . 机床与液压,1995,133(1): 1-12. SHI W X, DU Y T. The new development of hydroelectric servo system of adaptive control[J]. Mach.Hydrau., 1995, 133(1): 1-12. (in Chinese)
. MARSIK J. A new conception of digital adaptive PSD control[J]. Probl. Contr. Inf. Theory, 1983, 12(4): 267-279. 李士勇.模糊控制·神经控制和智能控制论[M]. 哈尔滨: 哈尔滨工业大学出版社,1996. LI SH Y. Fuzzy Control·Neurocontrol and Intelligent Cybernetics[M]. Harbin: Harbin Institute of Technology Press, 1996.(in Chinese)
. MARSIK J, STREJC V. Application of identification free algorithms for adaptive control[J]. Automatica, 1989, 25(2): 273-277.