徐家文, 王建业.电解加工在航空制造中的应用及发展[J].航空制造技术, 2002(4):21-30.

XU J W, WANG J Y.Application and Development of electrochemical machining in the aviation manufacture [J].Aeronautical Manufacturing Technology, 2002(4):21-30.(in Chinese)

贾宝贤, 王振龙, 赵万生.基于特种加工的微小孔加工技术[J].电加工与模具, 2005(2):1-5.

JIA B X, WANG ZH L, ZHAO W SH.Techniques of machining micro holes based on non-traditional machining [J].Electromachining & Mould, 2005(4):1-5.(in Chinese)

王振龙, 朱保国, 田锡清.气体介质中深小孔电火花加工技术研究[J].航空学报, 2007, 28(2):460-463.

WANG ZH L, ZHU B G, TIAN X Q.Research on dry EDM for deep and small holes [J].Acta aeronautica et astronaut ica sinica, 2007, 28(2):460-463.(in Chinese)

MASUZAWA T, MOBER W, TOMAS B, et al..Drilling of deep micro-hole by EDM [J].Annals of the CIRP, 1989, 38(1):23-27.

王续跃, 李建丽, 周彪, 等.分流法小孔电火花加工与试验[J].光学 精密工程, 2009, 17(11):2730-2737.

WANG X Y, LI J L, ZHOU B, et al..Electrical discharge machining for small-holes by current dividing[J].Opt. Precision Eng., 2009, 17(11):2730-2737.(in Chinese)

王建业, 徐家文.电解加工原理及应用[M].北京:国防工业出版社, 2001.

WANG J Y, XU J W.Principle and Application of Electrochemical Machining[M].Beijng:National Defense Industry Press, 2001.(in Chinese)

Hecker, G.E.Model-prototype comparison of free surface vortices [J].Journal of the Hydraulics Division, ASCE, 1981, 107(10):1243-1259.

陈云良, 伍超, 叶茂, 等.立轴旋涡多圈螺旋流场特性研究[J].四川大学学报, 2007, 39(1):13-17.

CHEN Y L, WU CH, YE M, et al..Research on flow field characteristics of vertical vortex with multi-circle spiral flow [J].Journal of Sichuan University(Engineering Science Edition), 2007, 39(1):13-17.(in Chinese)

叶茂, 伍超, 陈云良, 等.立轴旋涡试验与数值模拟研究[J].水力发电学报, 2007, 26(1):33-36.

YE M, WU CH, CHEN Y L.Model investigation and numerical simulation of vertical vortex [J].Journal of Hydroelectric Engineering, 2007, 26(1):33-36.(in Chinese)

陈云良.进水口前立轴旋涡水力特性的研究[D].成都:四川大学, 2006.

CHEN Y L.Research for Hydraulic Characteristics of Vertical Vortex at Hydraulic Intakes[D].Chengdu:Sichuan University, 2006.(in Chinese)

JOHN E H, WALTER C M.Velocity of air-core vortices at hydraulic intakes[J].Journal of Hydraulic Engineering, 1994, 120 (3):284-297.

王明环, 朱荻, 徐惠宇.微螺旋电极在改善微细电解加工性能中的应用[J].机械科学与技术, 2006, 25(3):348-351.

WANG M H, ZHU D, XU H Y.Use of micro-helix electrodes in improving performance of micro-ECM[J].Mechan ical science and technology, 2006, 25(3):348-351.(in Chinese)

ZHI W F, LIH W H.The analysis and investigation on the microelectrode fabrication by electrochemical machining[J].International Journal of Machine Tools & Manufacture, 2009, 46(7-8):659-666.

SCHUSTER R, KIRCHINER V, ALLONGUE P, et al..Electrochemical micromachining[J].Science, 2000, 289:98-101.

王昆, 朱荻.基于线电极原位制作的微细电解线切割加工[J].光学 精密工程, 2009, 17(11):2738-2743.

WANG K, ZHU D.Wire electrochemical micro machining by using in situ fabricating wire electrode[J].Opt. Precision Eng., 2009, 17(11):2738-2743.(in Chinese)

刘勇, 曾永彬, 朱荻, 等.三维微细电解铣削加工的实时控制与检测[J].光学 精密工程, 2010, 18(6):1309-1318.

LIU Y, ZENG Y B, ZHU D, et al..Real-time control and data acquisition system for 3D micro electrochemical milling[J].Opt. Precision Eng., 2010, 18(6):1309-1318.(in Chinese)

王明环, 朱荻, 张朝阳.微细孔电解加工控制方法及试验研究[J].中国机械工程, 2007, 18(6):646-650.

WANG M H, ZHU D, ZHANG ZH Y.Control and experimental research on microhole machining in micro-ECM [J].China Mechanical Engineering, 2007, 18(6):646-650.(in Chinese)