OHMORI H. Electrolytic in-process dressing (ELID) grinding method for ultra-precision mirror surface grinding[J]. Journal of Japan Society for Precision Engineering, 1993,59(9):1451.[2] 尹韶辉,曾宪良,范玉峰,等. ELID镜面磨削加工技术研究进展[J]. 中国机械工程,2010,21(6):750-755. YIN SH H, ZENG X L, FAN Y F, et al.. Research progresses of ELID mirror grinding technology[J]. China Mechanical Engineering, 2010,21(6):750-755. (in Chinese)[3] 潘君骅. 光学非球面的设计、加工与检测[M]. 苏州:苏州大学出版社, 1994. PAN J H. The Design, Manufacture and Test of the Aspherical Optical Surfaces [M]. Suzhou: Soochow University Press, 1994. (in Chinese)[4] JONES R A. Optimization of computer controlled polishing [J]. Applied Optics, 1977,16(1):218-224.[5] 李洪玉,张伟,于国彧. 计算机控制光学表面成形中加权空间反卷积算法研究[J]. 中国光学快报(英文版),2009,7(7):627-631. LI H Y, ZHANG W, YU G Y.Study of weighted space deconvolution algorithm in computer controlled optical surfacing formation [J]. Chinese Optics Letters,2009,7(7):627-631.[6] 张峰,徐领娣,范镝,等. 表面改性非球面碳化硅反射镜的加工[J]. 光学 精密工程, 2008,16(12):2479-2484. ZHANG F, XU L D, FAN D, et al.. Fabrication of surface modification aspheric SiC mirror [J]. Opt. Precision Eng., 2008,16(12): 2479-2484. (in Chinese)[7] PROKHOROW I V, KORDONSKY W I, GLEB L K, et al.. New high-precision magnetorheological instrument-based method of polishing optics[J]. OSA OF&T Workshop Digest, 1992,24:134-136.[8] 石峰,戴一帆,彭小强,等. 磁流变抛光消除磨削亚表面损伤层工艺研究[J]. 光学 精密工程, 2010,18(1):162-168. SHI F, DAI Y F, PENG X Q, et al.. Study on the novel process of reducing subsurface damage in grinding by Magnetorheological Finishing [J]. Opt. Precision Eng., 2010,18(1):162-168.(in Chinese)[9] ALLEN, L N, HANNON J J, WAMBACH R W. Final surface error correction of an off-axis aspheric petal by ion figuring [J]. SPIE, 1992,1543:190-200.[10] 张峰,张学军,余景池,等. 磁流变抛光数学模型的建立[J]. 光学技术,2000,26(2):190-192. ZHANG F, ZHANG X J, YU J C, et al.. Foundation of mathematics model of magnetorheological finishing [J]. Optical Technique, 2000,26(2):190-192.[11] 张峰,张斌智. 磁流体辅助抛光工件表面粗糙度研究[J]. 光学 精密工程, 2005,13(1):34-39. ZHANG F, ZHANG B Z. Surface roughness of optical elements fabricated by magnetic fluid-assisted polishing[J]. Opt. Precision Eng., 2005,13(1):34-39. (in Chinese)[12] 张峰,范镝,李锐钢,等. 非球面碳化硅反射镜的加工与检测[J]. 应用光学,2008,29(6):1004-1008. ZHANG F, FAN D, LI R G, et al.. Fabrication and testing of aspheric silicon carbide mirror [J]. Journal of Applied Optics, 2008,29(6):1004-1008. (in Chinese)[13] 王鹏,赵文才,胡明勇,等. 离轴非球面的Hindle检测[J]. 光学 精密工程, 2002,10(2):139-142. WANG P, ZHAO W C, HU M Y, et al.. Hindle testing of the off-axis convex asphere surface[J]. Opt. Precision Eng., 2002,10(2):139-142. (in Chinese)[14] BURGE J H, ANDERSON D S. Full-aperture interferometric test of convex secondary mirrors using holographic test plates[J]. SPIE, 1994,2199:181-190.[15] 谢意,陈强,伍凡,等. 凹非球面检测的双计算全息图设计及制作[J]. 光电工程,2010,6(35):59-62. XIE Y, CHEN Q, WU F, et al.. Design and fabrication of twin computer-generated holograms for testing concave aspherical surfaces [J]. Opto-Electronic Engineering, 2010,6(35):59-62. (in Chinese)[16] LIU Y M, GEORGE N L. Subaperture testing of aspheres with annular zones[J]. Applied Optics, 1988,27(21):4504-4513.[17] 张伟,王 曌 ,任智斌,等. 大口径凸非球面反射镜的拼接检测算法研究[J]. 光学技术,2010,2(36):182-186. ZHANG W , WANG Z , REN ZH B , et al.. Stitching arithmetic of the sub-aperture testing of large convex aspheric surface [J]. Optical Technique, 2010,2(36):182-186. (in Chinese)[18] 王孝坤,郑立功,张学军. 子孔径拼接干涉检测凸非球面的研究[J]. 光学学报, 2010,30(7):2022-2026. WANG X K, ZHENG L G, ZHANG X J. Testing convex aspheres by subaperture stitching interferometry[J]. Acta Optica Sinica, 2010, 30(7):2022-2026. (in Chinese)[19] 陈旭,刘伟奇,康玉思,等. Offner 补偿器的结构设计与装调[J]. 光学 精密工程,2010,18(1):88-93. CHEN X, LIU W Q, KANG Y S, et al. Design and tolerance analysis of Offner compensator[J]. Opt. Precision Eng., 2010,18(1): 88-93. (in Chinese)[20] 李欢,向阳. 10远心离轴三反消像散望远系统的光学设计[J]. 光子学报,2009,38(9):2256-2260. LI H, XIANG Y. Design of 10 FOV telecentric off-axis three-mirror anastigmatic telescope[J]. Acta Photonica Sinica, 2009,38(9):2256-2260. (in Chinese)