YOU Feng-ling, FENG Qi-bo, ZHANG Bin. Straightness error measurement based on common-path compensation for laser beam drift[J]. Editorial Office of Optics and Precision Engineering, 2011,19(3): 515-519
YOU Feng-ling, FENG Qi-bo, ZHANG Bin. Straightness error measurement based on common-path compensation for laser beam drift[J]. Editorial Office of Optics and Precision Engineering, 2011,19(3): 515-519 DOI: 10.3788/OPE.20111903.515.
Straightness error measurement based on common-path compensation for laser beam drift
方向的最大漂移量由21.6 m减少到5 m;由温度梯度引起的光线漂移经补偿后最大漂移量由65.7 m 减少为8.9m。实验结果与理论分析均表明
该方法能有效减少各种因素引起的光线漂移对直线度测量结果的影响
提高测量直线度误差的准确性。
Abstract
The laser beam drift is one of the key factors that influence on the accuracy of laser measurement of straightness errors
and a novel method for straightness error measurement based on common-path compensation for the laser beam drift was proposed. The measurement principle and system configuration were given
influences of the laser beam drifts caused by different factors on straightness error measurement were analyzed
and a compensation model was established.After compensation
the results show that the variation of emission beam is reduced from 28.4 m to 5.6 m and from 21.6 m to 5 m in
X
direction and in
Y
direction
respectively
and the variation of beam drift due to temperature gradient is from 65.7 m to 8.9 m. Both experimental results and theoretical analysis show that the common-path compensation for the laser beam drift method can decrease greatly the influences of the laser beam drift on the straightness error measurement
and can enhance its measurement accuracy.
关键词
Keywords
references
匡翠方, 冯其波,张斌. 直线导轨四自由度测量方法的研究[J]. 中国激光, 2005,32(9):1266-1270. KUANG C F,FENG Q B,ZHANG B.Study of the method for measuring four-degree-of-freedom geometric errors of a linear stage[J].Chinese Journal of Lasers,2005,32(9):1266-1270.(in Chinese)[2] 曹睿,张斌,方恒楚,等. 一种多自由度测量系统中滚转角测量的新方法的研究[J]. 光学学报,2008,28(12):2344-2348. CAO R,HZANG B,FANG H CH,et al.. A method for roll-angle measurement in multi-degree-of-freedom measuring system[J]. Actaoptica Sinica,2008,28(12):2344-2348. (in Chinese)[3] 翟玉生,冯其波,由凤玲. 基于直角棱镜的三维转角测量[J]. 光学学报,2009,29(s2): 309-312. ZHAI Y SH,FENG Q B,YOU F L. A method of three-dimensional rotation measurement based on rectangular-prism[J]. Actaoptica Sinica,2009,29(s2):309-312. (in Chinese)[4] 殷纯永,曾理江. 自适应直线度测量方法及其装置:中国,89103290.8 .1990. YIN CH Y,ZENG L J. An adaptive method and device for straightness measurement:China,89103290.8 .1990. (in Chinese)[5] Michael Reid Sogard. Laser interferometer having a sheath for the laser beam:US,5708505 .[6] ISHIDA A. Apparatus for measuring straightness:US,5333053 .1994.[7] FENG Q,ZHANG B,KUANG C.A straightness measurement system using a single-mode fiber-coupled laser module[J]. Optics & Technology,2004,36:279-283.[8] 冯其波,田芊,梁晋文. 自动读出的光纤激光准直系统[J]. 仪器仪表学报,1994,15(4):363-366. FENG Q B,TIAN Q,LIANG J W. Display laser collimation system with fiber automatically[J].Chinese Journal of Scientific Instrument, 1994,15(4):363-366. (in Chinese)[9] BORN M,WOLF E. Optics Principle[M]. Beijng:Pulishing House of Electronics Industry,2005:111-112.[10] 方仲彦,殷纯永,梁晋文. 高精度激光准直技术的研究(一)[J]. 航空计测技术,1997,17(1):3-6. FANG ZH Y, YIN CH Y,LIANG J W. Study on high accuracy laser alignment technique(1)[J]. Aviation Metrology & Measurement Technology, 1997,17(1):3-6. (in Chinese)[11] 方仲彦,殷纯永,梁晋文. 高精度激光准直技术的研究(二)[J]. 航空计测技术,1997,17(2):5-8. FANG ZH Y,YIN CH Y,LIANG J W. Study on high accuracy laser alignment technique(2)[J]. Aviation Metrology & Measurement Technology,1997,17(2):5-8. (in Chinese)