Analysis of fluid flow and heat transfer in weld pool during pulsed laser welding Hastelloy C-276 alloy

WU Dong-jiang; WANG Zhan-hong; MA Guang-yi; YANG Yi-bin; GUO Yu-quan; GUO Dong-ming

doi:10.3788/OPE.20122003.0534

您当前的位置：

首页 >

文章列表页 >

Analysis of fluid flow and heat transfer in weld pool during pulsed laser welding Hastelloy C-276 alloy

Article | 更新时间：2020-08-12

- Analysis of fluid flow and heat transfer in weld pool during pulsed laser welding Hastelloy C-276 alloy
- Optics and Precision Engineering Vol. 20, Issue 3, Pages: 534-540(2012)
- 作者机构：
  
  大连理工大学精密与特种加工教育部重点实验室, 辽宁大连 116024
- 作者简介：
- 基金信息：
- DOI：10.3788/OPE.20122003.0534
  CLC： TN249;TG456.7
- Received：01 November 2011，
  
  Revised：24 November 2011，
  
  Published Online：22 March 2012，
  
  Published：22 March 2012
- 稿件说明：
移动端阅览
吴东江, 王占宏, 马广义, 杨义彬, 郭玉泉, 郭东明. 脉冲激光焊接HastelloyC-276合金的熔池流动传热特性分析[J]. 光学精密工程, 2012,(3): 534-540

WU Dong-jiang, WANG Zhan-hong, MA Guang-yi, YANG Yi-bin, GUO Yu-quan, GUO Dong-ming. Analysis of fluid flow and heat transfer in weld pool during pulsed laser welding Hastelloy C-276 alloy[J]. Editorial Office of Optics and Precision Engineering, 2012,(3): 534-540
吴东江, 王占宏, 马广义, 杨义彬, 郭玉泉, 郭东明. 脉冲激光焊接HastelloyC-276合金的熔池流动传热特性分析[J]. 光学精密工程, 2012,(3): 534-540 DOI： 10.3788/OPE.20122003.0534.

WU Dong-jiang, WANG Zhan-hong, MA Guang-yi, YANG Yi-bin, GUO Yu-quan, GUO Dong-ming. Analysis of fluid flow and heat transfer in weld pool during pulsed laser welding Hastelloy C-276 alloy[J]. Editorial Office of Optics and Precision Engineering, 2012,(3): 534-540 DOI： 10.3788/OPE.20122003.0534.

摘要

基于流体动力学方程和传热方程建立了三维瞬态模型

用于研究脉冲激光焊接0.5 mm厚Hastelloy薄板时熔池的流动行为及传热特性。应用Fluent软件

采用有限容积法(FVM)求解控制方程

用SIMPLE算法处理速度与压力的耦合。引入

来衡量焊接熔池中对流传热与传导传热的相对强弱

并以此分析焊接熔池的传热特性。结果表明:沿焊接方向

焊接熔池的流动速度随着离熔池中心距离的增加先增加后减小;在给定试验条件下

熔池流动速度在离熔池中心0.2 mm左右时出现最大值

且沿焊接方向前方稍大于后方

而后迅速减小为零;焊接熔池中对流的存在使得焊接熔池熔深较小而熔宽较大;最终的焊接形貌由对流传热与传导传热相互作用而成。对焊缝形貌的数值模拟结果与实验结果进行了比较

计算结果与实验结果吻合较好。此模型可为脉冲激光焊接Hastelloy C-276薄板时熔池流体流动行为的分析提供理论依据。

Abstract

A 3D transient model was established based on the theories of fluid dynamics and heat transfer to analyze the fluid flow and the heat transfer characteristics in the liquid pool when a pulse laser was used to weld the Hastelloy C-276 alloy. On the basis of software Fluent

the Finite Volume Method (FVM) was employed to solve the control equations and the algorithm of SIMPLE was adopted to deal with the coupling of velocity and pressure. The

number was induced to evaluate the relative importance of convection and conduction then to analyze the heat transfer characteristics of welding pool. The research indicates that fluid flow velocities along the welding direction in the liquid pool increase with the increasing of the distance from the melting pool center

and then decrease. Under the given conditions

the maximum flow velocity is firstly found at the 0.2 mm from the melting pool center

then it reduces to zero rapidly and velocities in front of the melting pool along the welding direction are slightly larger than that of in the rear ones. Furthermore

The convection leads the melting pool to wider and shallower and the interaction of convection and conduction decides the final weld joint morphology. The numerical simulation is in good agreement with the experimental results

Which proves that the model can provide a theoretical basis for the analysis of the fluid flow in the weld pool during pulsed laser welding thin Hastelloy C-276 alloy.

关键词

Keywords

references

李力松. 哈氏合金C276材料在化工压力容器中的应用 [J]. 石油化工设计, 2003, 20(1): 36-38. LI L S. Application of Hastelloy C-276 in pressure vessel [J]. Petrochemical Design, 2003, 20(1): 36-38. (in Chinese)[2] 包国平. Hastelloy C-276合金的焊接 [J]. 大型锻铸件, 2008 (4): 33-35. BAO G P. The welding process of Hastelloy C276 alloy [J]. Heavy Casting and Forging, 2008 (4): 33-35. (in Chinese)[3] 张明乾, 刘昱, 李承亮,等. 浅谈压水堆核电站AP1000屏蔽式电动主泵 [J]. 水泵技术, 2008,(4): 1-5. ZHANG M Q, LIU Y, LI CH L. A brief talk on the shielding pump of AP1000 PWR [J]. Technology of Water Pump, 2008,(4):1-5. (in Chinese)[4] 秦渊, 毕娟, 倪晓武, 等. 毫秒激光金属打孔的解析和实验 [J]. 光学精密工程, 2011, 19(2): 340-347. QIN Y, BI J, NI X W, et al.. Analysis and experiment on millisecond pulsed laser drilling of metals [J]. Opt. Precision Eng., 2011, 19(2): 340-347. (in Chinese)[5] 单肖楠, 刘云, 曹军胜,等. 808 nm 千瓦级高效大功率半导体激光光源 [J]. 光学精密工程, 2011, 19(2): 452-456. SHAN X N, LIU Y, CAO J SH, et al.. 808 nm Kw-output high-efficiency diode laser sources [J]. Opt. Precision Eng., 2011, 19(2): 452-456. (in Chinese)[6] 吴东江, 尹波, 周秋菊, 等. 用Nd :YAG激光焊接殷钢薄板材料 [J]. 光学精密工程, 2009, 17(3): 557-562. WU D J, YIN B, ZHOU Q J, et al.. Nd: YAG laser beam welding invar36 alloy sheet [J]. Opt. Precision Eng., 2009, 17(3): 557-562. (in Chinese)[7] 郑权, 李永正. 微型桥带的成型与焊接工艺研究 [J]. 光学精密工程, 2000, 8 (3): 265-268. ZHENG Q, LI Y ZH. Producing and welding thin bridge-belt [J]. Opt. Precision Eng., 2000, 8 (3): 265-268. (in Chinese)[8] X HE, FUERSCHBACH P W, DEBROY T. Heat transfer and fluid flow during laser spot welding of 304 stainless steel [J]. Journal of Physics D, 2003, 36(12):1388-1398.[9] X HE, ELMER J W, DEBROY T. Heat transfer and fluid flow in laser micro welding [J]. Journal of Physics, 2005, 97:084909-1-9.[10] ZHANG W, ROY G G, ELMER J W, et al.. Modeling of heat transfer and fluid flow during gas tungsten arc spot welding of low carbon steel [J]. Journal of Applied Physics, 2003, 935: 3022-3033.[11] KOU S, WANG Y H. Computer simulation of convection in moving arc weld pools [J]. Metallurgical Transactions A, 1986, 17A: 2271-2277.[12] KOU S, SUN D K. Fluid flow and weld penetration in stationary arc welds [J]. Metallurgical Transactions A, 1985, 16A: 203-213.[13] 武传松, 郑炜, 吴林,等. 脉冲电流作用下TIG焊接熔池行为的数值模拟 [J]. 金属学报, 1998, 34(4): 416-421. WU CH S, ZHENG W, WU L. Numerical simulation of TIG weld pool behavior under the action of pulsed current [J]. Acta Metallurgica Sinica, 1998, 34(4): 416-421. (in Chinese)[14] 赵明, 武传松, 孙永兴,等. 全熔透钨极惰性气体保护电弧焊熔池流动与传热动态过程的数值分析 [J]. 机械工程学报, 2009, 45(9): 266-271. ZHAO M, WU CH S, SUN Y X et al.. Numerical analysis of dynamic fluid flow and heat Transfer in fully-penetrated GTAW weld pool [J]. Journal of Mechanical Engineering, 2009, 45(9): 266-271. (in Chinese)[15] 董文超, 陆善平, 李殿中, 等. 微量活性组元氧对焊接熔池Marangoni对流和熔池形貌影响的数值模拟 [J]. 金属学报, 2008,(2)44:249-256. DONG W CH, LU SH P, LI D ZH, et al.. Numerical simulation of effects of the minor active-element oxygen on the Marangoni convection and the weld shape [J]. Acta Metallurgica Sinica, 2008,(2):249-256. (in Chinese)[16] 陶文铨. 数值传热学 [M]. 西安:西安交通大学出版社, 2004. TAO W Q. Numerical heat transfer [M].Xi'an: Xi'an Jiaotong University Press, 2004. (in Chinese)[17] 王西昌, 左从进, 柴国明, 等. 活性剂对GH4169薄板电子束焊接焊缝成形的影响 [J]. 焊接学报, 2009,30(2):83-87. WANG X C, ZUO C J, CHA G M, et al.. Effect of activating fluxes on appearance of weld in thin plate electron beam welding of nickel-base super alloy GH4169 [J]. Transactions of the China Welding Institution, 2009,30(2):83-87.(in Chinese)[18] SHAOO T, DEBROY T, MCNALLAN. Surface tension of binary metal-surface active solute systems under conditions relevant to welding metallurgy [J]. Metall Trans, 1998,19B:483-491.

Views

364

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Low stress laser welding technology for corrugated diaphragm of pressure sensor

CDEM-DEM analysis of the coupled wheel-ground dynamics behavior

Effect of laser welding parameters on microstucture and mechanical properties of C-276/304 overlapping weld

Weld width prediction of weldment bottom surface in high-power disk laser welding

Mixing characteristics of passive-type micro-mixer with 3D-asymmetrical rhombus

Related Author

XU Jiahao

ZHU Minjie

LIU Shuai

CHEN Fanhong

DU Xiaohui

ZHANG Yiming

LU Yang

FENG Chun

Related Institution

Nanchang University of Aeronautics

Instrumentation Technology and Economy Institute

School of Engineering Sciences， University of Chinese Academy of Sciences

Institute of Mechanics， Chinese Academy of Sciences

School of Civil and Transportation Engineering， Hebei University of Technology

AI问答

Address：No.3888 Dong Nanhu Road, Changchun, Jilin, China Postal code：130033
Tel：0431-86176855 Email：gxjmgc@ciomp.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 吉ICP备11002662号-17 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰