This paper explored and selected an optimal thermal error model of the Computer Numberical Control(CNC) machining center to compensate the main error source

the thermal error of spindle

in the machine processing and to improve the machining accuracy. In experiments

the leaderway-V450 machining center was taken as a compensation object

and the Support Vector Regression (SVR)model and Multiple Regression(MLR) model were analyzed and compared. Firstly

the MLR model and the SVR model were established according to the first batch of data of the CNC center gained in summer. Then

by substituting the second batch of data measured in summer into two kinds of models respectively

the compensation accuracy of each model was calculated. Furthermore，by substituting the third batch of data measured in autumn into two kinds of models respectively，the compensation accuracy of each model was calculated again. Finally

the robustness between both models was compared according to the precision variation regulation. The experiment shows that the compensation standard deviations of SVR model both in summer and autumn are less than 2 m

and that of MLR model in summer is less than 2 m

while less than 8 m in autumn. These data show that the SVR model not only has high accuracy

but also has higher robustness for the thermal error modeling of CNC center.