龚勇清，刘智怀，高益庆，等. 一种二元光学元件阵列微芯模的工艺设计研究[J]. 应用光学， 2009,30(2):304-308.GONG Y Q, LIU ZH H, GAO Y Q, et al.. Process design for micro core mould of binary optical element [J]. Journal of Appl. Opt., 2009, 30(2):304-308. (in Chinese)[2]杨国光. 微光学与系统[M]. 杭州: 浙江大学出版社, 2008.YANG G G. Micro-optics and System [M]. Hangzhou: Zhejiang University Press, 2008. (in Chinese)[3]杨天博,郭宏,李达成. 白光扫描干涉测量算法综述[J]. 光学技术, 2006, 32(1):115-120.YANG T B, GUO H, LI D CH. The summary of algorithms for white-light scanning interferometry [J]. Optical Technique, 2006, 32(1):115-120. (in Chinese)[4]邹文栋, 黄长辉, 欧阳小琴,等. 合金韧窝断口三维微观形貌的白光相移干涉检测重构及分形表征[J]. 中国机械工程. 2010，21（22）:2675-2678.ZOU W D, HUANG CH H, OUYANG X Q, et al.. White light phase-shifting interferometer detection, reconstruction and fractal characterization of alloy dimple fracture 3D microstructure [J]. China Mechanical Engineering, 2010,21(22):2675-2678. (in Chinese)[5]邹文栋,黄长辉, 欧阳小琴,等. 合金韧窝断口微观形貌的扫描白光干涉三维检测重构及Motif表征[J].机械工程学报， 2011,47(10):8-13.ZOU W D, HUANG CH H, OUYANG X Q, et al.. Scanning white-light interferometric measurement, 3-D reconstruction and motif evaluation of alloy dimple fracture microtopography [J]. Chinese Journal of Mechanical Engineering, 2011,47(10):8-13. (in Chinese)[6]DONG W P, SULLIVA P J, STOUT K J. Comprehensive study of parameters for characterization 3-D surface topography-Ⅲ[J]. Wear, 1994,178(1):29-43.[7]DONG W P, SULLIVAN P J, STOUT K J. Comprehensive study of parameters for characterization 3-D surface topography-Ⅲ[J]. Wear,1994,178(1):45-60.[8]邹文栋, 黄长辉, 郑玱, 等. 用扫描白光干涉术检测合金韧窝断口微观三维形貌 [J]. 光学 精密工程, 2011， 19(7):1612-1618.ZOU W D, HUANG CH H, ZHENG Q, et al.. Measurement of microscopic surface topography of alloy dimple fracture by scanning white-light interferometry [J]. Opt. Precision Eng., 2011, 19(7):1612-1618. (in Chinese)[9]李思涛，叶嘉雄. 二元光学元件的制作及其误差分析[J]. 光电子技术与信息, 2000,13(5):24-29.LI S T, YE J X. Fabrication and error analysis of binary optical elements [J]. Optoelectronic Technology & Information, 2000,13(5):24-29. (in Chinese)[10]李红军，赵晶丽. 二元光学元件制作过程中的线宽误差[J]. 光电子激光, 2000,11(3):279-281.LI H J，ZHAO J L. Linewidth error in fabrication of binary optical element [J]. Journal of OptoelectronicsLaser, 2000,11(3):279-281. (in Chinese)[11]郑学哲，严瑛白, 金国藩, 等. 对准误差对二元光学器件衍射效率的影响[J]. 光电子激光,1997,8(4):241-245.ZHENG X ZH, YAN Y B, JIN G F, et al.. Effect of alignment error on binary optics element efficiency [J]. Journal of OptoelectronicsLaser, 1997,8(4):241-245. (in Chinese)[12]徐德衍，王青. 现行光学元件检测与国际标准[M].北京：科学出版社,2009.XU D Y, WANG Q. Test and International Standard for Contemporary Optical Components [M]. Beijing: Science Press, 2009. (in Chinese)[13]李成贵, 董申. 三维表面微观形貌的表征参数和方法[J]. 宇航计测技术, 1999, 19(6):33-43.LI CH G, DONG SH. The parameters and methods of characterizing 3-D surface microtopography [J]. Journal of Astronautic Metrology and Measurement, 1999,19(6):33-43. (in Chinese)