ZEMA L, LORETI G, MELOCCHI A, et al.. Injection molding and its application to drug delivery [J]. Controlled Release,2012,159(3): 324-331.[2]LOPPMANN J M, GEIGER E J, PISANO A P. Polymer investment molding: method for fabricating hollow, microscale parts [J]. Sensors and Actuators A: Physical, 2007,134(1):2-10. [3]SONG M C, LIU Y, ZHU T L. Injection molding of plastic microfluidic chip [J]. Nanotechnology and Precision Engineering,2011,9(4):329-334. [4]BABUR O, SONAT I. Warpage and structural analysis of thin shell plastic in the plastic injection molding [J]. Materials and Design,2009,30(2):367-375. [5]SANCHZE R, AISA J, MARTINEZ A, et al.. On the relationship between cooling setup and warpage [J]. Measurement,2012,45(5): 1051-1056. [6]TANG S H, TAN Y J, SAPUAN S M, et al.. The use of Taguchi method in the design of plastic injection mould for reducing warpage [J]. Materials Processing Technology,2006,182(1-3): 418-426. [7]申长雨，吴海宏，赵振峰. 注塑制品内应力计算的非线性黏弹性本构方程[J]. 化工学报,2007,58(2): 490-494．SHEN C Y, WU H H, ZHAO Z F. Non-linear viscoelastic constitutive equation to calculate internal stress of inject ion molded articles [J]. Journal of Chemical Industry and Engineering,2007,58(2): 490-494．(in Chinese)[8]蒋炳炎，沈龙江，罗建华,等. 微特征结构对导光板翘曲变形的影响[J]. 光学 精密工程, 2007,15(2): 180- 185.JIANG B Y, SHEN L J, LUO J H, et al.. Effects of different micro2feature structures on warpage and deformation of light guide plate [J]. Opt. Precision Eng., 2007,15(2):180-185. (in Chinese)[9]HAKMIAN E, SULONG A B. Analysis of warpage and shrinkage properties of injection-molded micro gears polymer composites using numerical simulations assisted by the Taguchi method [J]．Materials & Design, 2012, 42:62-71．[10]REDDY B S, KUMAR J S, REDDY V K, PADMANABHAN G. Application of soft computing for the prediction of warpage of plastic injection molded parts [J]. Engineering Science and Technology Review, 2012,2 (1): 56-62．[11]KRAMSCHUSTER A, CAVITT R, ERMER D, et al. Quantitative study of shrinkage and warpage behavior for microcellular and conventional Injection molding [J]. Polymer Engineering &Science，2005,45 (10)：1408-1418．[12]徐征，王继章，杨铎,等. 辅助溶剂对PMMA微流控芯片模内键合的影响[J]. 光学 精密工程, 2012, 20(2): 321-328.XU ZH, WANG J ZH, YANG D, et al.. Effect of assistant solvent on in-mold bonding of PMMA microfluidic chips [J]. Opt. Precision Eng., 2012, 20(2) : 321-328.(in Chinese)