何铁春, 周世勤.惯性导航加速度计[M]. 北京: 国防工业出版社, 1983: 35-326.

HE T CH, ZHOU SH Q. Inertial Navigation Accelerometer [M]. Beijing: National Defense Industry Publish, 1983:35-41, 195-197, 279-326.

周海涛.数字闭环加速度计检测电路研究[D].北京: 北京航空航天大学, 2010.

ZHOU H T. Research in the Detection Circuit of the Digital Closed-loop Accelerometer [D]. Beijing: Beihang University, 2010.

LU Y J. Inertia Apparatus (II) [M]. Beijing: China Space Navigation Publish, 2009: 28.

王平, 赵新民, 段尚枢, 等.加速度传感器电激励等价性测试方法的研究[J].计量学报, 1994, 15(3): 188-192.

WANG P, ZHAO X M, DUAN SH SH, et al.. Study on electricity simulation equivalence test of accelerometer [J]. Acta Metrologica Sinica, 1994, 15(3): 188-192.

张春熹, 魏渊, 张晞, 等.数字闭环加速度计系统模型分析与校正设计[J]. 仪器仪表学报, 2012, 33(12): 2833-2839.

ZHANG CH X, WEI Y, ZHANG X, et al.. Model analysis and emendation design of the digital close-loop accelerometer system[J]. Chinese Journal of Scientific Instrument, 2012, 33(12): 2833- 2839. (in Chinese)

姜劭栋, 裘安萍, 施芹, 等.硅微陀螺仪正交耦合系数的计算及验证[J].光学 精密工程, 2013, 21(1): 87-93.

JIANG S D, QIU A P, SHI Q, et al.. Calculation and verification of quadrature coupling coefficients of silicon micro-gyroscope [J]. Opt. Precision Eng., 2013, 21 (1): 87-93. (in Chinese)

陈茂胜, 金光, 张涛, 等.积分反馈自抗扰控制力矩陀螺框架伺服系统设计[J].光学 精密工程, 2012, 20(11): 2424-2432.

CHEN M SH, JIN G, ZHANG T, et al.. Design of gimbal servo system of CMG using active disturbance rejection control with integral feedback [J]. Opt. Precision Eng., 2012, 20(11): 2424-2432. (in Chinese)

王耿, 官春林, 张小军, 等.应变式微型精密压电驱动器的一体化设计及其PID控制[J].光学 精密工程, 2013, 21(3): 709-716.

WANG G, GUAN CH L, ZHANG X J, et al.. Design and control of miniature piezoelectric actuator based on strain gauge sensor [J]. Opt. Precision Eng., 2013, 21(3): 709-716. (in Chinese)

陈茂胜, 金光, 安源, 等.采用自适应PI控制的单框架控制力矩陀螺角动量飞轮系统的设计[J].光学 精密工程, 2011, 19(5): 1075-1081.

CHEN M SH, JIN G, AN Y, et al.. Design of angular momentum wheel in SGCMG using adaptive compensation PI control strategy [J]. Opt. Precision Eng., 2011, 19(5): 1075-1081. (in Chinese)

闵跃军, 薛旭.基于频域的挠性摆式加速度计表头参数辨识方法[J]. 中国惯性技术学报, 2008, 16(1): 94-99.

MIN Y J, XUE X. Parameter identification method based on frequency domain of flexure hinged pendulum accelerometer [J]. Journal of Chinese Inertial Technology, 2008, 16(1): 94-99. (in Chinese)

GJB 1037A-2004单轴摆式伺服线加速度计试验方法[S].北京:国防科学技术工业委员会, 2004.

GJB 1037A-2004 Test methods for single-axis pendulous servo linear accelerometers [S]. Beijing: COSTIND, 2004.

薛旭, 闵跃军, 郭晓芳, 等.挠性摆式加速度计频率特性的电激励测试方法及参数辨识[J]. 导弹与航天运载技术, 2008, 4(1): 39-45.

XUE X, MIN Y J, GUO X F, et al.. Method of electric stimulation test for frequency characteristic of flexible pendulum accelerometer[J]. Missiles and Space Vehicles, 2008, 4(1): 39-45. (in Chinese)

顾欣怡, 张晞, 魏渊.数字闭环加速度计控制器设计与仿真[J]. 箭弹与制导学报, 2012, 6(4): 170-173.

GU X Y, ZHANG X, WEI Y. Design and simulation of digital closed-loop accelerometer controller [J]. Journal of Projectiles Rockets Missiles and Guidance, 2011, 6(4): 170-173. (in Chinese)

LI L, ZHANG CH X, ZHANG X, et al.. Investigation on noise of digital close-loop q-flex accelerometer [J]. IEEE Conference on Industrial Electronics and Applications, 2011:614-619.