ZHANG Ming-yue, YANG Hong-bo, ZHANG Jia-bao etc. Servo system of harmonic drive electromechanical actuator using improved ADRC[J]. Editorial Office of Optics and Precision Engineering, 2014,22(1): 99-108
ZHANG Ming-yue, YANG Hong-bo, ZHANG Jia-bao etc. Servo system of harmonic drive electromechanical actuator using improved ADRC[J]. Editorial Office of Optics and Precision Engineering, 2014,22(1): 99-108 DOI: 10.3788/OPE.20142201.0099.
Servo system of harmonic drive electromechanical actuator using improved ADRC
Because Electromechanical Actuator (EMA) is a nonlinear
time-varying servo system
this paper proposes an improved Active Disturbance Rejection Controller(ADRC) to improve the tracking performance of the EMA. First
the mathematical model and control strategy of the EMA were presented and the nonlinear factors influencing the performance of EMA were analyzed by the control theory. Then
the improved ADRC was described and the method to select parameters were given by modern control theory. Furthermore
the feasibility of this controller was demonstrated through a simulation under different input conditions. Finally
the performance of PI controller
ADRC
and improved ADRC was compared by experiments on a harmonic drive EMA servo system. Experimental results indicate that the improved ADRC controller can remove the position flat crest and velocity dead space
and its phase error is 0.087 22 rad when the angular position signal of 10 sin(5 πt) is tracked. Furthermore
the rise time
overshoot and the steady state mean square deviation of EMA system are 9-18 ms
0-7.25%
0.007 60-0.010 83
respectively
when ±1°-±15°angular positions are tracked. These results means that the performance of the improved ADRC is better than those of the PI controller and traditional ADRC. It has a fast response
slight overshoot and high accuracy in stability
as well as strong anti-disturbance and robustness.
PENG SH H, LI H D, SU ZH, et al.. Sliding mode variable structure control of electric steering engine with uncertain parameters[J]. Electric Machines and control, 2009, 13(1):128-132. (in Chinese)
SEONG H, JANG M L, Adaptive dynamic surface control with sliding mode control and RWNN for robust positioning of a linear motion stage [J]. Mechatronics, 2012, 22:222-238.
骆光照.电动舵机的鲁棒控制器[D], 西安:西北工业大学, 2003.
LUO G ZH. Robust Control Application in Electromechanical Actuator [D]. Xi’an: College of Automatization Northwesten Polytechnical University, 2003.(in Chinese)
曹登刚.混沌优化及其在电动舵机控制系统上的应用[D].湘潭:湘潭大学, 2008.
CAO D G. Chaos Optimization and its Application in the Control System of Electro-mechanical Actuators [D]. Xiangtan:Xiangtan university, 2008. (in Chinese)
MILAN R, ZARKO C, DRAGAN L. Intelligent control of DC motor driven electromechanical fin actuator[J]. Control Engineering Practice, 2012, 20: 610-617.
CHEN M SH, JIN G, ZHANG T, et al.. Design of gimbal servo system of CMG using active disturbance rejection control with integral feedback[J]. Opt. Precision Eng., 2012, 20(11):2424-2432. (in Chinese)
XUE L J, LI H T, LI H, et al.. High precision control based on ADRC used in gimbal system of MSCMG[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(11):1497-1501. (in Chinese)
YU H B, XIAO B X, YU K, et al.. Study of friction compensation in bi-axis servo system based on improved ADRC [J]. Journal of Hefei University of Technology, 2010, 3(11):1634-1638. (in Chinese)
CHONG Y, ZHANG K, WANG J Y. Design and application of a servo control system based on a fuzzy active disturbance rejection control[J]. College of Automatization Northwesten Polytechnical University, 2011, 29(2):217-222. (in Chinese)
FU Y Y, CH H, LIU H S, et al.. Study on missile electro-hydraulic actuator system based on active disturbance rejection control method[J]. Journal of Astronautics, 2012, 31(4):1051-1055. (in Chinese)
TAN W B, LI X F, XIANG H B, et al.. Parameter identification of LuGre model based on analysis of steady state error[J]. Opt. Precision Eng., 2011, 19(3):664-671. (in Chinese)
YU W, MA J G, LI J Y, et al.. Friction parameter identification and friction compensation for precision servo turning table[J]. Opt. Precision Eng., 2011, 19(11):2736-2743. (in Chinese)
ZHI Q G. Scaling and bandwidth-parameterization based controller tuning [C]. Proceedings of the American Control Conference, Denver, 2003, 6:4989-4996.
韩京清.自抗扰控制技术—估计补偿不确定因素的控制技术[M].北京:国防工业出版社, 2008.
HAN J Q. Active Disturbance Rejection Control Technique-the Technique for Estimating and Compensating the Uncertainties [M]. Beijing: National Defence Industry Press, 2008. (in Chinese)