唐修检, 田欣利, 吴志远, 等. 工程陶瓷边缘碎裂行为与机理研究进展 [J]. 中国机械工程, 2010, 21(1): 114-119. TANG X J, TIAN X L, WU ZH Y, et al. Research progresses on behavior and mechanism of edge chipping for engineering ceramics [J]. China Mechanical Engineering, 2010, 21(1): 114-119(in Chinese).

YOSHIFUMI O, TETSUO M, MINORU S. Chipping in high precision slot grinding of Mn-Zn ferrite [J]. CIRP Annals-Manufacturing Technology, 1995, 44 (1): 273-277.

CHIU W C, THOULESS M D, ENDRES W J. An analysis of chipping in brittle materials [J]. International Journal of Fracture, 1998, 90(4): 287-298.

CHAI H. On the mechanics of edge chipping from spherical indentation [J]. International Journal of Fracture,2011, 167(1):28-35.

GOGOTSI G A, MUDRIK S P. Fracture barrier estimation by the edge fracture test method[J]. Ceramics International, 2009,35(5): 1871-1875.

YANG B, SHEN X, LEI S. Mechanisms of edge chipping in laser-assisted milling of silicon nitride ceramics [J]. International Journal of Machine Tools and Manufacture, 2009, 49(3-4): 344-350.

秦娜. 旋转超声波磨削制孔的切削力建模与试验研究[D].大连:大连理工大学,2011. QIN N. Cutting Force Model and Experimental Study on CoreDrilling by Ultrasonie-Vibration-Assisted Grinding [D].Dalian: Dalian University of Technology, 2011. (in Chinese)

杜鹃,李占杰,宫虎,等. 硬脆材料加工诱导崩边断裂的机理分析及控制方法研究[J]. 机械科学与技术, 2013, 32(10):1451-1455. DU J, LI ZH J, GONG H,et al.. Study on the mechanisms and control method of edge chipping fracture in the machining of brittle and hard materials [J]. Mechanical Science and Technology for Aerospace Engineering, 2013, 32(10):1451-1455. (in Chinese)

许俊,胡红斐,唐勇军,等. 旋转超声加工陶瓷过程中崩边的有限元分析及实验验证[J]. 电加工与模具,2014(4):33-37. XU J, HU H F, TANG Y J, et al.. Finite element analysis and experimental verification of ceramics edge-chipping in rotary ultrasonic machining [J]. Electromaching Mould,2014(4):33-37. (in Chinese)

王健全,田欣利,张保国,等. 单颗粒金刚石划擦Si3N4陶瓷的磨削力研究[J]. 现代制造工程, 2013(8): 1-4. WANG J Q, TIAN X L, ZHANG B G,et al..Experimental research on scratching force of single diamond for silicon nitride ceramics [J].Modern Manufacturing Engineering, 2013(8): 1-4. (in Chinese)

NG S, LE D, TUCKER S, et al.. Control of machining induced edge chipping on glass ceramics[C]. Proceedings of the 1996 ASME International Mechanical Engineering Congress and Exposition, 1996: 229-236.

田欣利,于爱兵. 工程陶瓷加工的理论与技术[M].第1版. 北京:国防工艺出版社,2006: 90. TIAN X L, YU A B. Theory & Technology of Engineering Ceramic Machining[M]. The 1st edition, Beijing: National Defense Industry Press, 2006: 90.(in Chinese)

张璧, 孟鉴. 工程陶瓷磨削加工损伤的探讨[J]. 纳米技术与精密工程, 2003, 1(1): 48-56. ZHANG B, MENG J.Grinding damage in fine cermaics [J].Nanotechnology and Precision Engineering, 2003, 1(1): 48-56.(in Chinese)

唐修检,张保国,田欣利, 等. 基于灰色-尖点突变理论的氧化铝陶瓷边缘碎裂损伤规律与机理研究[J]. 人工晶体学报, 2014,43(4): 945-953. TANG X J, ZHANG B G, TIAN X L,et al.. Study on the failure regulars and mechanisms of edge chipping for Al2O3 ceramics based on grey-cusp catastrophe theory [J]. Journal of Synthetic Crystals, 2014,43(4): 945-953.(in Chinese)