CHEN Wen-tao, GAO Yun-guo, SHAO Shuai. Positive seal in large-diameter and wide-band laser emission pipe[J]. Editorial Office of Optics and Precision Engineering, 2015,23(8): 2236-2242
To prevent dust and moisture to enter the laser emission pipe of a high-energy laser emission system with large-diameter and wide-band
a positive pressure ventilation seal method for the laser emission pipe is proposed. This method uses purified
dry and clean air to exhaust original air
and allow a positive pressure flow on an emission port to resist the air diffusion into the laser emission pipe from outside and to achieve the sealing for the pipe. The numerical simulation and analysis for a flow field of the positive pressure ventilation in the laser emission pipe are performed by the CFD software-Fluent
and it shows that the clean air keeps a certain velocity and pressure on the emission port and could form a positive pressure airflow to resist the backflow from outside. For a long wavelength 10.6 μm laser
the variation of refractive index in the pipe is estimated to be a magnitude of 10
-7
based on the pressure change
which causes a 1 μm optical path difference. The simulation results are experimentally verified and the results show that the velocity varies of interior have nearly no difference
though its' velocity is a litter bigger than that of simulation
and there is a positive pressure airflow with 0.64 m/s.Moreover
the relative humidity of clean air has dropped to 29% from 59%
which basically reaches the design sealing requirements of the positive pressure ventilation system for dust-proof and dehumidification.
关键词
Keywords
references
张景旭. 地基大口径望远镜系统结构技术综述[J]. 中国光学, 2012, 5(4):327-336. ZHUANG J X. Overview of structure technologies of large aperture ground-based telescopes[J].Chinese Optics, 2012, 5(4):327-336. (in Chinese)
BELY P. The Design and Construction of Large Optical Telescopes[M]. US:Springer, 2003.
沈娜,张祥金,郭婧. 水雾对激光引信的衰减[J]. 光学 精密工程,2013,21(4):864-869. SHEN N,ZHANG X J,GUO J.Attenuation of laser fuse through fog [J].Opt. Precision Eng.,2013,21(4):864-869. (in Chinese)
冯峰,贺少勃,袁晓东,等. 污染物致光学元件损伤特性研究进展[J]. 激光与红外,2012,42(10):1098-1102. FENG F, HE SH B, YUAN X D, et al.. Progress of study of damage characteristics caused by pollutants to optical components[J]. Laser & Imfrared, 2012,42(10): 1098-1102. (in Chinese)
孙超,王红霞,傅关新,等. 雾对激光的衰减特性研究[J]. 光散射学报,2011,23(3): 201-205. SUN CH, WANG H X, FU G X, et al.. Study of the attenuation characteristics of the laser transmitting in fog[J]. The Journal of Light Scattering, 2011, 23(3): 201-205. (in Chinese)
肖韶荣, 汪坤, 刘娟. 大气气溶胶浓度检测及检测系统设计[J]. 中国光学, 2012, 4(6): 633-638. XIAO SH R,WANG K,LIU J. Detection of atmospheric aerosol concentration and detection system design[J]. Chinese Optics, 2012, 4(6):633-638. (in Chinese)
阴俊燕, 尹福昌, 陈明,等. 影响激光大气传输因素分析[J]. 红外与激光工程, 2009(S3):399-402. YIN J Y,YI F CH,CHEN M,et al.. Impact on laser transmission in atmosphere[J]. Infrared and Laser Engineering,2009(S3):399-402. (in Chinese)
金钢,刘顺发,李树民,等. 激光热效应对光束控制系统发射光束质量的影响[J]. 中国激光,2002, 29(10):895-899. JIN G, LIU SH F, LI SH M, et al.. Laser thermal effects in beam control system on the emitted laser quality[J]. Chinese Journal of Laser, 2002,29(10):895-899. (in Chinese)
柳建,王世庆,金刚,等. 吹气抑制气体热效应时管道结构对光传输的影响[J]. 强激光与粒子束,2007, 19(3): 391-393. LIU J, WANG SH Q, JIN G, et al.. Effect of tube structure on beam propagation when depressing thermal effect by blowing[J]. High Power Laser and Particle Beams, 2007, 19(3):391-393. (in Chinese)
柳建,李树民,金刚,等. 沿Z型光传输管道轴向吹气对激光传输的影响[J]. 强激光与粒子束, 2005, 17(2): 164-168. LIU J, LI SH M, JIN G, et al.. Influence of blowing non-absorbing gas on beam propagation through Z-shape tube [J]. High Power Laser and Particle Beams, 2005, 17(2):164-168. (in Chinese)
孙运强,习锋杰,陈洪斌,等. 内通道气帘的设计与分析[J]. 激光与光电子学进展,2011,48(5):051404. SUN Y Q, XI F J, CHEN H B, et al..Design and analysis on gas curtain of beam path indoor[J].Laser & Optoelectronics Progress,2011,48(5):051404. (in Chinese)
孙运强. 激光内通道传输的气体热效应研究[D]. 长沙:国防科学技术大学, 2011. SUN Y Q. Study on the thermal blooming of beam propagation in the inner channel [D]. Changsha: National University of Defense Technology,2011. (in Chinese)
钱纁,杜洪兵. 大功率二氧化碳激光器窗口材料的选择与发展[J]. 新材料产业,2007(6):63-68. QIAN X, DU H B.Selection and development of window materials for high-power carbon dioxide laser [J]. Advanced Materials Industry, 2007(6):63-68. (in Chinese)
冯志庆,白兰,张增宝,等. 高能激光反射镜热变形补偿[J]. 光学 精密工程,2010,18(8):1781-1787. FENG ZH Q, BAI L, ZHANG Z B, et al..Thermal deformation compensation of high-energy laser mirrors[J].Opt. Precision Eng.,2010,18(8):1781-1787. (in Chinese)
刘巨,董得义,辛宏伟,等. 大口径反射镜组件的温度适应性[J]. 光学 精密工程,2013,21(12):3169-3175. LIU J, DONG D Y, XIN H W, et al..Temperature adaptation of large aperture mirror assembly[J].Opt. Precision Eng.,2013,21(12):3169-3175. (in Chinese)
APOLLONOV V V. 用于高功率激光器的光学元件[J]. 中国光学, 2013,6(1):1-8. APOLLONOV V V. Optics for high power lasers[J]. Chinese Optics,2013,6(1):1-8. (in Chinese)