Design and test for large-diameter fast seal window

LIU Xu-tang; GAO Yun-guo; CAO Dian-sheng

doi:10.3788/OPE.20152309.2578

您当前的位置：

首页 >

文章列表页 >

Design and test for large-diameter fast seal window

更新时间：2020-08-12

- Design and test for large-diameter fast seal window
- Optics and Precision Engineering Vol. 23, Issue 9, Pages: 2578-2585(2015)
- 作者机构：
  
  1. 中国科学院长春光学精密机械与物理研究所,吉林长春,中国,130033
  2. 中国科学院大学北京,中国,100049
- 作者简介：
- 基金信息：
- DOI：10.3788/OPE.20152309.2578
  CLC： V556;TN243
- Received：12 November 2014，
  
  Revised：17 January 2015，
  
  Published：25 September 2015
- 稿件说明：
移动端阅览
刘旭堂, 高云国, 曹佃生. 大口径快速密闭窗口的设计及测试[J]. 光学精密工程, 2015,23(9): 2578-2585

LIU Xu-tang, GAO Yun-guo, CAO Dian-sheng. Design and test for large-diameter fast seal window[J]. Editorial Office of Optics and Precision Engineering, 2015,23(9): 2578-2585
刘旭堂, 高云国, 曹佃生. 大口径快速密闭窗口的设计及测试[J]. 光学精密工程, 2015,23(9): 2578-2585 DOI： 10.3788/OPE.20152309.2578.

LIU Xu-tang, GAO Yun-guo, CAO Dian-sheng. Design and test for large-diameter fast seal window[J]. Editorial Office of Optics and Precision Engineering, 2015,23(9): 2578-2585 DOI： 10.3788/OPE.20152309.2578.

摘要

针对大口径宽波段高能激光发射系统使用环境复杂、激光发射间歇时间长

晶体窗口无法满足使用要求等情况

为发射系统设计了一套快门式机械窗口。该机械窗口采用聚氯乙烯(PVC)薄板作为防尘罩

利用弹簧和密封环组成半固定式滑槽

采用步进电机驱动。利用圆形薄板的大挠度变形原理

建立了防尘罩挠曲变形量与正压风载间的非线性微分方程;以中心挠度为摄动参数用摄动法求解微分方程

获得防尘罩挠曲变形量与风压载荷间的关系

并进一步求出电机的负载扭矩。由于电机的输出扭矩是一定的

为了使防尘罩抗风载能力达到最大

利用电机负载与防尘罩挠曲变形量间的解析关系式进一步优化了防尘罩的弯曲刚度。实际测试结果显示

防尘罩挠曲变形量的求解误差不超过15%;当防尘罩弯曲厚度为0.8 mm时

防尘罩可以抵御12 m/s风载作用

电机负载扭矩为0.34 Nm;开启与关闭的最短时间小于3 s

窗口运行可靠

符合设备使用要求。

Abstract

As high-power laser launch system with large-caliber and multi-band has complex service environment and a long laser emission interval

and its crystal window can not meet use requirements

this paper designs an automatic shutter-type mechanical window for the laser emission system. The mechanical window consists of a Polyvinyl Chloride(PVC) sheet dust cover and a semi-permanent chute established by a spring and a pressure ring

driven by a stepping motor. Based on the large round plate deflection principle

it establishes the nonlinear differential equations for the deformation of dust cover and positive wind load. The center deflection perturbation is taken as the perturbation parameter to solve the differential equation to obtain the relationship between the dust deflection deformation and wind load and to further determine the motor load torque. Due to the certain motor load torque

the dust cover bending stiffness is optimized by using the relation between motor output torque and deformation to maximize capacity against the wind load. Experimental test shows that the solving error for the deflection of dust cover does not exceed 15%. When the thickness of the dust cover is 0.8 mm

it can resist 10 m/s wind load and the motor load torque is 0.34 Nm. The intervals of the window are stably from 2 to 3 s no matter it is opened or closed. This proposed window works reliably

satisfying working requirements.

关键词

Keywords

references

EDANEES A. Optomechanical Engineering Handbook [M].Boca Raton:CRC Press LLC,1999.

PAUL R Y. Opto-Mechanical Systems Design [M]. Boca Raton:CRC Press LLC, 2006.

YU F P, ZHAO X S, HU Z, et al.. Influence of thermal deformations of the output windows of high-power laser systems on beam characteristics [J]. Applied Optics, 2004, 43(35):6465-6472.

谢启明,李奕威,潘顺臣. 红外窗口和整流罩材料的发展和应用[J]. 红外技术,2012,34(10):559-567. XIE Q M, LI Y W, PAN SH CH. The development and application of the materials for infrared windows and domes [J]. Infrared Technology, 2012. 34(10):559-567. (in Chinese)

幺艳平, 刘景和. ZnSe红外窗口材料的性能及其制备[J]. 人工晶体学报,2006, 35(1):183-187. YAO Y P, LIU J H. Property and fabrication of ZnSe infrared window material [J]. Journal of Synthetic Crystals, 2006 35(1):183-187. (in Chinese)

VITALY E G, MICHELLE D S. Laser damage [J]. Optical Engineering, 2012, 51(12):121801-1.

孙航,张海波,曹立华,等. 大口径光电探测设备主镜晃动的误差补偿[J]. 光学精密工程, 2014, 22(1):85-91. SUN H, ZHANG H B, CAO L H, et al..Error compensation for primary mirror shaking of large aperture optical detection equipment [J].Opt. Precision Eng., 2014, 22(1):85-91.(in Chinese)

吴建梁. 受预张力薄膜的轴对称大挠度问题[D]. 重庆:重庆大学,2009. WU J L. Axial symmetrical large deflection of pre-stretched membranes [D]. Chongqing:Chongqing University, 2009.(in Chinese)

高晓威. 轴对称线布载荷作用下圆薄膜大挠度问题研究[D]. 重庆:重庆大学,2013. GAO X W. Study on large deflection problem of circular membrane under axisymmetric linearly-distributed loads[D]. Chongqing:Chongqing University, 2013.(in Chinese)

胡建力. 环形薄膜轴对称变形的一般理论及其实践[D]. 重庆:重庆大学,2012. HU J L. General theory and its practice of axisymmetric deformation of annular membrane [D]. Chongqing:Chongqing University,2012.(in Chinese)

徐新行,高云国,杨洪波,等. 车载大口径刚性支撑式快速反射镜[J]. 光学精密工程,2014, 22(1):117-123. XU X H, GAO Y G, YANG H B,et al..large-diameter fast steering mirror on rigid support technology for dynamic platform [J]. Opt. Precision Eng., 2014, 22(1):117-123. (in Chinese)

伞晓刚. 1 m口径光电经纬仪关键部件优化设计与仿真分析研究[D]. 北京:中国科学院大学,2013. SAN X G. Research on optimization design and simulation analysis for the key components of 1m aperture photoelectric theodolite [D]. Beijing:University of Chinese Academy of Sciences, 2013.(in Chinese)

周超, 杨洪波, 吴小霞,等. 1.2 m望远镜风载作用分析[J]. 红外与激光工程, 2011, 40(5):889-893. ZHOU C, YANG H B, WU X X,et al.. Influence of wind loading on the 1.2 m telescope [J]. Infrared and laser engineering,2011,40(5):889-893.(in Chinese)

钱伟长. 圆薄板大挠度变形[J]. 物理学报,1954,10(3):209-238. QIAN W CH. On the large deflection of circular plate [J]. Acta Physica Sinica,1954,10(3):209-238.(in Chinese)

Views

573

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design and test of launch window for large-caliber multi-band high power laser system

Related Author

LIU Xu-tang

GAO Yun-guo

SHAO Shuai

JIANG Zhan-hong

XUE Xiang-yao

Related Institution

No data

AI问答

Address：No.3888 Dong Nanhu Road, Changchun, Jilin, China Postal code：130033
Tel：0431-86176855 Email：gxjmgc@ciomp.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 吉ICP备11002662号-17 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰