LIU Yu-sheng, WANG Zhi-qian, SU Wan-xin. Measurement of ship distributed deformation based on embedded system[J]. Editorial Office of Optics and Precision Engineering, 2015,23(10z): 247-252
LIU Yu-sheng, WANG Zhi-qian, SU Wan-xin. Measurement of ship distributed deformation based on embedded system[J]. Editorial Office of Optics and Precision Engineering, 2015,23(10z): 247-252 DOI: 10.3788/OPE.20152313.0247.
Measurement of ship distributed deformation based on embedded system
To detect distributed deformation angles in real-time for large measuring and weapon devices mounted on large ships
as well as to improve the ability of controlling and real-time monitoring to each measurement point
a measuring system for the distributed deformation was realized based on an embedded system.The hardware design
the realization of software and corresponding algorithm were explored. Firstly
comparing to the previous measurement method with distributed sampling
central obtaining data and calculating data
a new model of distributed measurement was proposed. And Simple Network Manegement Protocol(SNMP) was selected to realize the remote control of all devices. Then the structure of the protocol and its composition were introduced. A hardware platform was designed for the distributed deformation devices of each measurement point based on ARM+DSP+FPGA structure. After that
the software was developed on the WinCE operation system and the flow process was discussed. Finally
the experiment of system was executed both on deformation measurement and SNMP control. Experimental result shows that the device can obtain the precision within 5" without network congestion problems caused by image acquisition as the previous devices. And the capability of extending and administrating has been enhanced.
关键词
Keywords
references
朱昀炤,汪顺亭,缪玲娟,等. 船体变形测量技术综述[J]. 船舶工程, 2007,29(6):58-61. ZHU J SH, WANG SH T, MIAO L J, et al.. Review of measuring technique for ship deformation[J]. Ship Engineering, 2007,29(6):58-61.(in Chinese)
鲍海阁. 舰船船体变形及其测量方法[J]. 船舶工程, 2013,35(5):72-74. BAO H G. Ship Body Deformations and Measurement Method[J]. Ship Engineering, 2013,35(5):72-74.(in Chinese)
王晓明,张尧禹,乔彦峰. 用动态水平基准测量系统实时测量船体横扭角和纵挠角[J]. 光学 精密工程,2013,21(2):294-300. WANG X M, ZHANG Y Y, QIAO Y F. Real-time measurement of ship's transverse and vertical twist angles by dynamic horizontal datum measuring system[J]. Opt. Precision Eng., 2013,21(2):294-300.(in Chinese)
张尧禹,李岷,于萍,等. 测量船船体变形测量系统的研究[J]. 仪器仪表学报, 2006,27(6):1505-1506. ZHANG Y Y, LI M, YU P, et al.. Research on angle diatortion for the measuring ship[J]. Chinese Journal of Science Instrument, 2006,27(6):1505-1506.(in Chinese)
李向荣. 基于莫尔条纹法的扭转测量技术研究[D].长春:中国科学院长春光学精密机械与物理研究所,2006. LI X R. The research on roll measurement based on moiré fringle[D]. Changchun:Changchun Institute Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, China.
王建军,王颖. 光栅法在船体横扭角测量中的应用[J]. 光学 精密工程,2005,13(3):371-375. WANG J J, WANG Y. Application of raster metering to hull transverse twist measurement[J]. Opt. Precision Eng., 2005,13(3):371-375.(in Chinese)
李晓勇,张忠华,朱伟康,等. 航天测量船船体变形的数据处理[J]. 光学 精密工程,2009,17(2):445-452. LI X Y, ZHANG ZH H, ZHU W K, et al.. Data Processing of hull deformation for spacecraft TT&C ship[J]. Opt. Precision Eng., 2009,17(2):445-452.(in Chinese)
李岩,张尧禹,岳俊华. 船体变形测量的新技术[J]. 光学 精密工程,2008,16(11):2235-2238. LI Y, ZHANG Y Y, YUE J H. New technology of ship distortion measurement[J]. Opt. Precision Eng., 2008,16(11):2235-2238.(in Chinese)
佘健,窦丽华,陈杰. 基于SNMP协议的网络主机综合监控方法研究[J]. 北京理工大学学报,2002,22(3):368-372. SHE J, DOU L H, CHEN J. A Study on Integrated Monitor and Control of the Network Host Based on the Simple Network Management Protocol[J]. Journal of Beijing Institute of Technology, 2002,22(3):3684-372.(in Chinese)
LIU Y SH, SU W X, WANG C X, et al.. Application of linear CCD image processing on self-collimation measurement of angle[J]. Computer Science and Network Technology(ICCSNT), IEEE, 2012:558-561.