ZHU Jun-qing, SHA Wei, CHEN Chang-zheng etc. Frequency response of imaging quality by micro-vibration for large-aperture space-borne telescope[J]. Editorial Office of Optics and Precision Engineering, 2016,24(5): 1118-1127
ZHU Jun-qing, SHA Wei, CHEN Chang-zheng etc. Frequency response of imaging quality by micro-vibration for large-aperture space-borne telescope[J]. Editorial Office of Optics and Precision Engineering, 2016,24(5): 1118-1127 DOI: 10.3788/OPE.20162405.1118.
Frequency response of imaging quality by micro-vibration for large-aperture space-borne telescope
The imaging quality of a large-aperture space-borne telescope is very sensitive to the micro-vibration induced by space environmental variation and the vibration inner of a satellite. Therefore
this paper researches the calculation method of frequency response of imaging quality effected by the micro-vibration to improve the dynamic imaging quality of the satellite in orbit. By using a real optical model to replace the linear optical model
it establishes an optical-mechanical integrated model to calculate the frequency response of the micro-vibration. Firstly
it builds Finite Element Model(FEM) for a space-borne telescope to calculate the structural frequency response and to obtain the displacement and phase of the optical surface nodes for each sampling frequency point. Then
the Monte-Carlo statistical method is used to establish the the optical-mechanical integrated model
and the root-mean-square (RMS) of system dynamic Modulation Transfer Function(MTF) and the Line of Sight(LOS) drift are analyzed to measure dynamic imaging performance of the large-aperture space-borne telescope. Finally
a structural prototype of large-aperture space-borne telescope is developed to verify the reliability of the FEM. The results show that the measured frequency is close to that of the FEM analysis and the error is under 5%
which meets the requirements of large-aperture space-borne telescopes for analysis of the dynamic imaging quality.
关键词
Keywords
references
STAHL H P, POSTMAN M, MOSIER G, et al.. AMTD:update of engineering specifications derived from science requirements for future UVOIR space telescopes[C].SPIE Astronomical Telescopes+ Instrumentation. International Society for Optics and Photonics, 2014:91431T-91431T-8.
MILLER D W, DE WECK O L, MOSIER G E. Framework for multidisciplinary integrated modeling and analysis of space telescopes[C].Workshop on Integrated Modeling of Telescopes. International Society for Optics and Photonics, 2002:1-18.
UEBELHART S A.Non-deterministic design and analysis of parameterized optical structures during conceptual design[D]. Massachusetts Institute of Technology, 2006.
刘巨,董得义,辛宏伟,等. 大口径反射镜组件温度适应性[J]. 光学精密工程,2013,21(12):3169-3175. LIU J, DONG D X, XIN H W, et al.. Temperature adaptation of large aperture mirror assembly[J].Opt. Precision Eng.,2013,21(12):3169-3175. (in Chinese)
HYDE T T, HA K Q, JOHNSTON J D, et al.. Integrated modeling activities for the James Webb Space Telescope:optical jitter analysis[C]. Astronomical Telescopes and Instrumentation. International Society for Optics and Photonics, 2004:588-599.
HILKERT J M, AMIL D L. Structural effects and techniques in precision pointing and tracking systems:a tutorial overview[C]. SPIE,2010, 7696:76961C.
刘祥意, 张景旭, 吴小霞,等. 环境对大口径SiC轻量化主镜视宁度的影响[J]. 光学精密工程,2015,23(3):776-783. LIU X Y, ZHANG J X, WU X X, et al.. Affect of environment on mirror seeing of large-aperture SiC lightweight primary mirror[J]. Opt. Precision Eng.,2015,23(3):776-783. (in Chinese)
刘海龙, 韩诚山, 李祥之, 等. 机械拼接时间延迟积分CCD空间相机的振动参数检测[J]. 光学精密工程,2015,23(3):729-737. LIU H L, HAN CH SH, LI X ZH, et al.. Vibration parameter measurement of TDICCD space camera with mechanical assembly[J]. Opt. Precision Eng.,2015,23(3):729-737. (in Chinese)
GENBERG V, MICHELS G, DOYLE K B. Integrated modeling of jitter MTF due to random loads[C].Proc. SPIE,2011, 8127:81270H-81270H.
PRIVAT M. On ground and in orbit microvibrations measurement comparison[J]. European Space Agency-publications-esa SP, 1999, 438:181-186.
张宇,张立国,张星祥. 行间转移大面阵CCD相机Smear噪声实时去除[J]. 光学精密工程,2013,21(9):2388-2394. ZHANG Y, ZHANG L G, ZHANG X X. Real-time elimination of Smear noise for large interline transfer area CCD camera[J]. Opt. Precision Eng.,2013,21(9):2388-2394. (in Chinese)
DOYLE K B. Structural line-of-sight jitter analysis for MLCD[C].Optical Engineering+ Applications. International Society for Optics and Photonics, 2007:66650I-66650I-12.
孙航, 张海波, 曹立华, 等. 大口径光电探测设备主镜晃动的误差补偿[J]. 光学精密工程,2014,22(1):85-91 SUN H, ZHANG H B, CAO L H, et al.. Error compensation for primary mirror shaking of large aperture optical detection equipment[J].Opt. Precision Eng., 2014,22(1):85-91. (in Chinese)
JUERGENS R C, CORONATO P A. Improved method for transfer of FEA results to optical codes[C].Optical Science and Technology, SPIE's 48th Annual Meeting. International Society for Optics and Photonics, 2003:105-115.
王红娟. 微振动对空间相机像质影响研究[D]. 北京:中国科学院大学, 2013. WANG H J. Research on Space Camera Image Degradation Induced by Micro-vibration[D]. Beijing:University of Chinese Academy of Sciences, 2013. (in Chinese)
HADAR O, FISHER M, KOPEIKA N S. Image resolution limits resulting from mechanical vibrations. Part Ⅲ:numerical calculation of modulation transfer function[J]. Optical Engineering, 1992, 31(3):581-589.
王书新, 李景林, 齐光, 等. 空间相机用爆炸螺栓防护装置[J]. 光学精密工程,2014,22(12):3318-3323. WANG SH X, LI J L, QI G, et al.. Protecting device for explosive bolt in space camera[J]. Opt. Precision Eng., 2014,22(12):3318-3323. (in Chinese)
孙斌, 李景林, 张星祥, 等. 600 mm长焦平面时间延迟积分CCD的交错拼接[J]. 光学精密工程,2014,22(11):2908-2913. SUN B, LI J L, ZHANG X X, et al.. Interleaving assembly of TDICCDs on 600 mm focal plane[J]. Opt. Precision Eng., 2014,22(11):2908-2913. (in Chinese)