Chen ZHANG, Shi-lei SUN, Wen-xuan SHI, et al. Linear CCD camera System for industry measurement and its noise evaluation[J]. Optics and precision engineering, 2016, 24(10): 2532-2539.
DOI:
Chen ZHANG, Shi-lei SUN, Wen-xuan SHI, et al. Linear CCD camera System for industry measurement and its noise evaluation[J]. Optics and precision engineering, 2016, 24(10): 2532-2539. DOI: 10.3788/OPE.20162410.2532.
Linear CCD camera System for industry measurement and its noise evaluation
To evaluate the imaging quality of a CCD camera rapidly
the Signal to Noise Ratio(SNR) was selected as the evaluation factors
a measurement system was constructed and methods to measure the camera's noise based on the output images of the camera were researched. The noise from the linear CCD camera was analyzed
a model for computing the SNR was established based on the fix pattern noise sources and temporal noise sources and the impact of Correlated Double Sample(CDS)processing on the power supply noise source was analyzed. A rapid measurement system for the SNR of camera in industry applications was designed
and a scheme to measure various noise sources was proposed by analyzing the theoretical model
practical tested data and 8 bit output images. Finally
the non-uniformity of the light source in the measurement system was discussed and it demonstrates that the light source meets the requirements of EVM1288 industry-standard. Experiment results indicate that the SNR of the camera reaches to 44 dB when the AD gain is set to be 8.7 dB
and it reaches to 46 dB if the interference of the non-uniformity from light source are eliminated. It concludes that the proposed scheme has higher measuring speeds
and satisfies the system requirements of SNR measurement for industry applications.
LIU D B. The design and research on linear CCD camera system for industry detection[D]. Nanjing:Nanjing University of Science and Technology, 2013. (in Chinese)
何薇. 布匹瑕疵实时视觉检测技术的研究与开发[D]. 无锡:江南大学, 2015.
HE W. The research on real-time detection of fabric defects[D].Wuxi:Jiangnan University, 2015. (in Chinese)
ZHU Q M, WANG L Q, YUAN B. Cooling CCD camera based on embedded system[J]. Infrared and Laser Engineering,2014,43(11):3608-3614. (in Chinese)
LI F N, WANG Y J, ZHANG T, et al.. Design of high-speed high-resolution CMOS camera acquisition system based on AM41V4 sensor[J]. Chinese Journal of Liquid Crystals and Displays,2015,30(3):492-498. (in Chinese)
TIAN R, CHEN CH N, DI N, et al.. Design of the CMOS camera measurement system[J]. Chinese Journal of Liquid Crystals and Displays,2014,29(6):1139-1143.(in Chinese)
LI X SH, WAN Z, LIU Z X, et al.. Method of CCD test and screening for space camera with wide field of view[J]. Infrared and Laser Engineering, 2014,43(7):2245-2250. (in Chinese)
WANG D J. Research on the TDI CCD signal to noise ratio and charge transfer smear in aerial remote sensing applications[D]. Changchun:Changchun Institute of Optics, Fine Mechanics and Physics,2013.(in Chinese)
LI Y F, LI M J, SI G L, et al.. Noise analyzing and processing of TDI-CCD image sensor[J]. Opt. Precision Eng.,2007,15(8):1196-1202.(in Chinese)
IRIE K,MCKINNON A E,UNSWORTH K, et al.. A technique for evaluation of CCD video-camera noise[J]. IEEE Transactions on Circuits and Systems for Video Technology, 2008,18(2):280-284.
Janesick, James R. Photon transfer:DN——>[lambda] [M]. USA, SPIE, 2007.
HUANG Q L, JIN W Q, ZHU M. TDICCD video data sampling technique for space remote sensing camera[J]. Spacecraft Recovery and Remote Sensing,2002,23(4):17-25. (in Chinese)
Standard 1288. Standard for Characterization of Image Sensors and Cameras. Release 3.1[S].