Chao BU, Wei-rong NIE, Qiao LUO, et al. Micro acceleration switch with tooth-shaped structure for long pulse sensitivity[J]. Editorial office of optics and precision engineeri, 2016, 24(11): 2730-2737.
DOI:
Chao BU, Wei-rong NIE, Qiao LUO, et al. Micro acceleration switch with tooth-shaped structure for long pulse sensitivity[J]. Editorial office of optics and precision engineeri, 2016, 24(11): 2730-2737. DOI: 10.3788/OPE.20162411.2730.
Micro acceleration switch with tooth-shaped structure for long pulse sensitivity
A micro acceleration switch for long pulse sensitivity was proposed to meet the requirement of a power management system of intelligent weapons for switch latching/unlatching. The switch was designed by using a suspended mass with tooth-shaped structure and a tooth shape guide and the energy dissipation was realized by the mutual collision of the mass and tooth shape guide during the moving process. The switch could implement the unlatch under the high amplitude and narrow pulse width acceleration and the latch under the low amplitude and long pulse width acceleration reliably. The structure and working principle of the switch were introduced. Then
the theoretical analysis and finite element analysis(FEA) of the switch were carried out and its model was simplified. A prototype switch was prepared by UV-LIGA technology
and the functional properties of the switch were verified by the combination of FEA and prototype test. The FEA shows that the switch latches reliably under 3 000
g
/3 ms half sine acceleration pulse. The centrifugal test result shows that the static latching threshold of switch is from 2 385.3
g
to 2 475.6
g
. The dropping shock test and FEA results show that the switch do not latch under 15 000
g
/0.3 ms half-sine acceleration. These results demonstrate that the switch meets the design requirements and can be applied to the occasions where the pulse width is required to be distinguished.
关键词
Keywords
references
XI Z, ZHANG P, NIE W, et al.. A novel MEMS omnidirectional inertial switch with flexible electrodes[J]. Sensors & Actuators A Physical, 2014, 212(6):93-101.
CAO Y, XI ZH W, YU P X, et al.. A MEMS inertial switch with a single circular mass for universal sensitivity[J]. Journal of Micromechanics & Microengineering, 2015, 25(10).
CURRANO L J, BECKER C R, LUNKING D, et al .. Triaxial inertial switch with multiple thresholds and resistive ladder readout[J]. Sensors & Actuators A Physical, 2013, 195(2):191-197.
KIM H, JANG Y H, KIM Y K, et al.. MEMS acceleration switch with bi-directionally tunable threshold[J]. Sensors & Actuators A Physical, 2014, 208(2):120-129.
MA C W, HUANG P C, KUO J C, et al .. A novel inertial switch with an adjustable acceleration threshold using an MEMS digital-to-analog converter[J]. Microelectronic Engineering, 2013, 110(20):374-380.
HUANG X L, XIONG Y, CHEN G Y, et al.. Fabrication of micro spiral acceleration switch using UV-LIGA technology[J]. Opt. Precision Eng., 2010, 18(5):1152-1158. (in Chinese)
CHEN W, YANG Z, WANG Y, et al. . Influence of applied acceleration loads on contact time and threshold in an inertial microswitch with flexible contact-enhanced structure[J]. Sensors & Actuators A Physical, 2014, 216(3):7-18.
WANG Y, YANG Z, XU Q, et al .. Design, simulation and characterization of a MEMS inertial switch with flexible CNTs/Cu composite array layer between electrodes for prolonging contact time[J]. Journal of Micromechanics & Microengineering, 2015, 25(8).
CURRANO L J, YU M, BALACHANDRAN B. Latching in a MEMS shock sensor:Modeling and experiments[J]. Sensors & Actuators A Physical, 2010, 159(1):41-50.
GUO Z Y, ZHAO Q C, LIN L T, et al .. An acceleration switch with a robust latching mechanism and cylindrical contacts[J]. Journal of Micromechanics & Microengineering, 2010, 20(5).
TSAI T Y, YEH C L, LAI Y S, et al.. Response spectra analysis for undamped structural systems subjected to half-sine impact acceleration pulses[J]. Microelectronics Reliability, 2007, 47(8):1239-1245.
GILARDI G, SHARF I. Literature survey of contact dynamics modelling[J]. Mechanism & Machine Theory, 2002, 37(10):1213-1239.
HEMKER K J, LAST H. Microsample tensile testing of LIGA nickel for MEMS applications[J]. Materials Science and Engineering:A, 2001, 319:882-886.