Gang WANG, Zhen CHEN, Yan-na LI, et al. Observation and analysis of surface defects on cavity mirror of chemical oxygen-iodine laser[J]. Optics and precision engineering, 2016, 24(12): 2948-2955.
DOI:
Gang WANG, Zhen CHEN, Yan-na LI, et al. Observation and analysis of surface defects on cavity mirror of chemical oxygen-iodine laser[J]. Optics and precision engineering, 2016, 24(12): 2948-2955. DOI: 10.3788/OPE.20162412.2948.
Observation and analysis of surface defects on cavity mirror of chemical oxygen-iodine laser
To figure out the causes of cavity mirror defects in a Chemical Oxygen-iodine Laser (COIL)
the surface defects on the cavity mirror were studied. A Scanning Probe Microscopy (SPM) was used to observe the surface defects on the cavity mirror
and its micro topography was analyzed. The shapes of the surface defects and the reasons why the defects appeared were discussed. Then
a simplified model of cavity mirror with defects was established. The ring beam irradiating the cavity mirror was simulated by using COMSOL Multiphysics. The relationship between the defect size
power density and the surface temperature of the cavity mirror was given and the influence of an adsorption layer on the melting damage of the cavity mirror was analyzed. The calculated results show that when the defect area is a constant
the larger the laser radiation power is and the faster the temperature grows
the more the melting damage of film surface is. Moreover
the mirror film has the possibility of melting damage at the defect radius of 2.3 mm. The absorption coefficient of the absorption layer increases by 1%
then the maximum temperature of the mirror increases about 210 K. The conclusion provides a reference for the analysis of the causes of cavity mirror damage and the replacement of the cavity mirror in the COIL system.
关键词
Keywords
references
桑凤亭, 金玉奇, 多丽萍.化学激光及其应用[M].北京:化学工业出版, 2006.
SANG F T, JIN Y Q, DUO L P. Chemical Laser and Its Application [M]. Beijing:Chemical Industry Press, 2006. (in Chinese)
ZHANG G W, LU X Q, CAO H B, et al .. Diffraction effect of high-power laser beams through contamination particles[J] . Acta Phys. Sin, 2012, 61(2):024201. (in Chinese)
YOU K W, ZHANG Y L, ZHANG X J, et al .. Influence of relative position of optical component surface defects on near field beam quality[J]. Chinese Journal of Lasers, 2015, 42(3):0308004. (in Chinese)
HUANG W, ZHANG Y D. Study of the damage mechanism and thermal distortion of optical coating components under CW high power laser radiation[J]. Opt. Precision Eng., 1996, 4(5):61-66.
ZHOU L D, SU J Q, LIU L Q, et al .. Effects on beam quality of booster stage induced by defects on optics[J]. High Power Laser and Particle Beams, 2009, 21(3):326-330.(in Chinese)
MIAO X X, YUAN X D, LV H B, et al .. Experimental study of laser-induced damage of optical components surface owing to particle contamination in high power laser facility[J]. Chinese Journal of Lasers, 2015, 42(6):0602001. (in Chinese)
WANG Y R, LI B CH, LIU M Q. Laser-induced temperature distributions in finite radia-size optical mirror[J]. High Power Laser and Particle Beams, 2010, 22(2):335-340. (in Chinese)
ZHANG L, NI X W, LU J, et al .. Numerical simulation of vaporization effect of long pulsed laser interaction with silicon[J]. Opt. Precision Eng., 2011, 19(2):437-443.(in Chinese)
陆启生, 范正修, 孙承纬, 等.激光辐照效应[M].北京:国防工业出版社, 2002.
LU Q SH, FAN ZH X, SUN CH W, et al .. Laser Irradiance Effect[M]. Beijing:National Defense Industry Press, 2002.(in Chinese)
HU M Y, CHEN ZH, YANG J K, et al .. Experimental study on thermal conductivity of SiO 2 thin film[J]. Journal of Southeast University, 2005, 35(3):396-399.
QI W Z, HUANG W, ZHANG B, et al .. Finite element analysis of thermal distortion of infrared CW laser reflectors[J]. High Power Laser and Particle Beams, 2004, 16(8):953-956.(in Chinese)