BEAUCAMP A, NAMBA Y. Super-smooth finishing of diamond turned hard X-ray molding dies by combined fluid jet and bonnet polishing[J]. CIRP Annals-Manufacturing Technology, 2013, 62(1):315-318.

许雪峰, 马冰迅, 黄亦申, 等.利用复合磨粒抛光液的硅片化学机械抛光[J].光学 精密工程, 2009, 17(7):1587-1593.

XU X F, MA B X, HUANG Y SH, et al.. Chemical mechanical polishing for silicon wafer by composite abrasive slurry[J]. Opt. Precision Eng., 2009, 17(7):1587-1593.(in Chinese)

PARK Y, LEE H, LEE Y, et al.. Effect of contact angle between retaining ring and polishing pad on material removal uniformity in CMP process[J]. International Journal of Precision Engineering and Manufacturing, 2013, 14(9):1513-1518.

LIU Y M, TAN J B, MA J. Fabrication and shielding effectiveness evaluation of curved mesh optical windows using ray-optic tracing and equivalent film methods[J]. Optics Communications, 2012, 285(20):4015-4018.

计时鸣, 黄希欢, 谭大鹏, 等.气-液-固三相磨粒流光整加工及其工艺参数优化[J].光学 精密工程, 2016, 24(4):855-864.

JI SH M, HUANG X H, TAN D P, et al.. Gas-liquid-solid abrasive flow polishing and its process parameter optimization[J]. Opt. Precision Eng., 2016, 24(4):855-864.(in Chinese)

张勤, 王建华, 黄维军, 等.旋流驱动微粒转动的性能与实验[J].光学 精密工程, 2015, 23(7):2013-2022.

ZHANG Q, WANG J H, HUANG W J, et al.. Performance and experiments of particle rotation driven by swirl[J]. Opt. Precision Eng., 2015, 23(7):2013-2022.(in Chinese)

RAYLEIGH L. On the pressure developed in a liquid during the collapse of a spherical cavity[J]. Philosophical Magazine, Series 6, 1917, 34(200):94-98.

权辉, 李仁年, 苏清苗, 等.基于PIV测试的螺旋离心泵内部流动特性研究[J].农业机械学报, 2015, 46(4):28-32, 58.

QUAN H, LI R N, SU Q M, et al.. Internal Flow Characteristic of Screw Centrifugal Pump Based on PIV[J]. Transactions of the Chinese Society for Agricultural Machinery, 2015, 46(4):28-32, 58.(in Chinese)

王波兰, 宗昕, 顾蕴松. PIV技术在复杂二相流场中的应用[J].实验流体力学, 2014, 28(1):60-64.

WANG B L, ZONG X, GU Y S. The application of PIV technology in complex two-phase flow field[J]. Journal of Experiments in Fluid Mechanics, 2014, 28(1):60-64.(in Chinese)

CHENG W, MURAI Y, ISHIKAWA M A, et al.. An algorithm for estimating liquid flow field from PTV measurement data of bubble motion[J]. Transactions of the Visualization Society of Japan, 2003, 23(11):107-114.

高晖, 郭烈锦, 赵丙强, 等.弯管内气液固三相流中液膜区流场的PIV测量[J].工程热物理学报, 2004, 25(2):255-258.

GAO H, GUO L J, ZHAO B Q, et al.. PIV measurement of liquid film flow field in gas-liquid-solid three phase flow through a curved pipe[J].Journal of Engineering Thermophysics, 2004, 25(2):255-258.(in Chinese)

赵斌娟, 袁寿其, 刘厚林, 等.基于Mixture多相流模型计算双流道泵全流道内固液两相湍流[J].农业工程学报, 2008, 24(1):7-12.

ZHAO B J, YUAN SH Q, LIU H L, et al.. Simulation of solid-liquid two-phase turbulent flow in double-channel pump based on Mixture model[J]. Transactions of the CSAE, 2008, 24(1):7-12.(in Chinese)

崔凯, 张海, 王卫良, 等.旋流燃烧器数值模拟中Realizable κ -ε和RSM模型的比较[J].工程热物理学报, 2012, 33(11):2006-2009.

CUI K, ZHANG H, WANG W L, et al.. Comparison between realizable κ -ε and RSM model in the simulation for a swirl burner[J]. Journal of Engineering Thermophysics, 2012, 33(11):2006-2009.(in Chinese)

李琛, 善盈盈, 厉志安, 等.图像粒子测速技术测量软性磨粒流流场[J].农业工程学报, 2015, 31(5):71-77.

LI CH, SHAN Y Y, LI ZH A, et al.. Measurement of softness abrasive flow field based on particles image velocimetry[J].Transactions of the CSAE, 2015, 31(5):71-77.(in Chinese)