Ji-qiang TANG, Shao-pu ZHAO, kuo WANG. Reliability design and structural optimization of locking device for magnetic suspension control moment gyro[J]. Optics and precision engineering, 2018, 26(3): 597-605.
DOI:
Ji-qiang TANG, Shao-pu ZHAO, kuo WANG. Reliability design and structural optimization of locking device for magnetic suspension control moment gyro[J]. Optics and precision engineering, 2018, 26(3): 597-605. DOI: 10.3788/OPE.20182603.0597.
Reliability design and structural optimization of locking device for magnetic suspension control moment gyro
To avoid the negative effects of structural parameters' randomness on its properties
an optimization method of locking elastic sheet based on reliability sensitivity was proposed. Firstly
the finite element model and failure modes of the locking elastic sheet for a magnetic suspension control moment gyro were analyzed. Afterwards
considering the randomness of the structural sizes and material parameters of the elastic sheet
the reliability of the elastic sheet in the series failure mode were studied by using the response surface method and the first order second moment method. Furthermore
the calculating formulas of reliability sensitivity with respect to the mean and variance of random variables were derived. Eventually
the model of elastic sheet reliability optimization was built with the optimization strategy determined by the result of reliability sensitivity analysis. The difference influence of safety factor optimization and reliability optimization was analyzed. Experimental results indicate that the reliability optimization could get better optimization results compared with the safety factor optimization. The reliability sensitivity optimization method not only reduces the weight of the elastic sheet by 23.71% under the premise of ensuring the high reliability of the elastic sheet
but also reduces the weight of gyro room by 0.98 kg
which is beneficial to weight reduction of the magnetic suspension control moment gyro.
FANG J CH, YANG L, SUN J J, et al .. Novel permanent-magnet bias radial magnetic bearing used in magnetical suspended flywheel[J]. Opt. Precision Eng., 2006, 14(4):444-451. (in Chinese)
NING X, HAN B CH, FANG J CH. Disturbance observer based decoupling method of double-gimbaled variable speed control moment gyroscope[J]. Journal of Mechanical Engineering, 2017, 53(10):52-59. (in Chinese)
YAN X J, ZHANG X Y, NIE J X, et al .. Prototype SMA actuated locking device for small space magnetic bearing flywheels[J]. Journal of Beijing University of Aeronautics and Astronautics, 2011, 37(2):127-131. (in Chinese)
PENTLICKI C, POUBEAU P. Magnetic bearing momentum wheel[C]. AIAA-6th Communications Satellite Systems Conference, AIAA, 1976: 76-39.
LIVET J, BRETAUDEAU M. Temporary locking device for inertia wheel: United States, 4345485[P]. 1982-08-24.
VAILLANT D G H, JOLY J. Device for temporarily locking a rotor onto a stator: United States, 4872357[P]. 1989-10-10.
LIU Q, FANG J CH, HAN B CH, et al .. Locking device for magnetic bearing flywheel and its optimization[J]. Opt. Precision Eng., 2010, 18(8):1814-1821. (in Chinese)
LIU Q, WU D Y, FANG J CH, et al .. Optimization of carbon fiber elastic sheet of clamping locking device for magnetically suspended flywheel[J]. Vibration Test and Diagnosis, 2016, 36(4):708-715, 810-811. (in Chinese)
刘文珽.结构可靠性设计手册[M].北京:国防工业出版社, 2008.
LIU W T. Structural Reliability Design Manual[M]. Beijing:National Defence Industry Press, 2008. (in Chinese)
ZHANG X Y, LIN Y X, WU S, et al .. Review on probabilistic design method for structural reliability[J]. Equipment Environmental Engineering, 2016, 13(3):161-168. (in Chinese)
李敏. 可靠度分析的响应面法研究[D]. 重庆: 重庆大学, 2016.
LI M. Reliability Analysis of Response Surface Method Research[D]. Chongqing: Chongqing University, 2016. (in Chinese)
CAI B, XING H F. Reliability sensitivety analysis based on response surface method[J]. Machine Design and Research, 2016, 32(4):28-30, 36. (in Chinese)
XU D T, SUN ZH L. Kinematic reliability analysis of the modified Delta parallel mechanism based on Monte Carlo method[J]. Machinery Design & Manufacture, 2016(10):167-169. (in Chinese)
ZHU Z F, DU X P. Reliability analysis with monte carlo simulation and dependent kriging predictions[J]. Journal of Mechanical Design, 2016, 138(12):121403.
LIU J, TAO F H, JIA CH ZH. Reliability robust design of tracked vehicle torque axis with multiple failure modes[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(4):815-820. (in Chinese)