Electromagnet door release mechanism in deploying mechanism for CubeSats

Jiao-long ZHANG; Jun ZHOU

doi:10.3788/OPE.20182603.0606

您当前的位置：

首页 >

文章列表页 >

Electromagnet door release mechanism in deploying mechanism for CubeSats

MICRO/Nano Technology and Fine Mechanics | 更新时间：2020-07-05

- Electromagnet door release mechanism in deploying mechanism for CubeSats
- Optics and Precision Engineering Vol. 26, Issue 3, Pages: 606-615(2018)
- 作者机构：
  
  西北工业大学精确制导与控制研究所陕西省微小卫星工程实验室, 陕西西安 710072
- 作者简介：
- 基金信息：
- DOI：10.3788/OPE.20182603.0606
  CLC： V421.7
- Received：25 September 2017，
  
  Accepted：06 November 2017，
  
  Published：25 March 2018
- 稿件说明：
移动端阅览
Jiao-long ZHANG, Jun ZHOU. Electromagnet door release mechanism in deploying mechanism for CubeSats[J]. Optics and precision engineering, 2018, 26(3): 606-615.
DOI：

Jiao-long ZHANG, Jun ZHOU. Electromagnet door release mechanism in deploying mechanism for CubeSats[J]. Optics and precision engineering, 2018, 26(3): 606-615. DOI： 10.3788/OPE.20182603.0606.

摘要

为实现"翱翔之星"立方星发射力学环境下可靠的锁定以及在轨低冲击快响应的解锁分离，提出了一种断电时弹簧锁定与加电时电磁铁吸合解锁的非火工解锁机构。首先，根据系统要求介绍了电磁解锁机构的工作原理，并建立了机-电-磁耦合动力学模型，分析解锁机构的动力学响应特性；其次，以地面测试试验结果为依据，进行电磁参数的多约束多目标设计与优化，并将优化出的参数在SIMULINK环境下进行仿真验证；再次，对电磁解锁机构样机进行功能测试，实测数值与仿真结果基本一致：额定电压28 V下样机的解锁时间为41.2 ms，解锁电流为2.2 A，能耗为2.5 J；最后，开展了力学环境和热真空环境地面试验以及±5 V电压拉偏测试，结果表明电磁解锁机构能够可靠锁定与解锁。本文设计的电磁解锁机构经过飞行验证成功应用于"翱翔之星"立方星的在轨解锁与分离，可为后续立方星星箭分离解锁机构的标准化设计提供参考。

Abstract

To implement reliable locking under launching mechanical environment and low-impact and fast-response unlocking on-orbit for the CubeSat "Star of Aoxiang"

a non-pyrotechnic door release mechanism was proposed which locked by reset spring at the time of power off and unlocked by electromagnetic force at the time of power on. Firstly

according to the system requirements

the work principle of electromagnet door release mechanism was introduced

and the coupling dynamical models involving mechanical-electrical-magnetic characteristics were established. Secondly

the multi-constrain and multi-objective problems of electromagnet parameters were solved based on the ground tests

after that

the simulation verification of the optimized parameters was implemented. Then

the functional tests for a prototype of the electromagnet door release mechanism were carried out. The measurement values agreed well with the simulations results

which showed that the unlocking time was 41.2 ms and the current was 2.2 A and the energy consumption was only 2.5 J at the typical voltage of 28 V. Finally

on the condition of mechanical and thermal-vacuum ground environment and down-deflection of ±5 V

the electromagnet door release mechanism could lock and unlock reliably. The proposed door release mechanism has successfully applied to unlocking and launching the CubeSat "Star of Aoxiang" on-orbit. It provides reference for further standardization design of door release mechanism for following CubeSats and other micro-satellites.

关键词

Keywords

references

SHIN Y, YOON S, SEO Y, et al .. Radiation effect for a cubesat in slow transition from the earth to the moon[J]. Advances in Space Research, 2015, 55(7):1792-1798.

VENTURINI C, ABRAMOWITZ L, JOHANSEN J, et al . . CubeSat developmental programs-working with the community[C]. AIAA SPACE 2009 Conference and Exposition, Pasadena, American Institute of Aeronautics and Astronautics Inc, 2009.

FISH C S, SWENSON C M, CROWLEY G, et al .. Design, development, implementation, and on-orbit performance of the dynamic ionosphere cubeSat experiment mission[J]. Space Science Reviews, 2014, 181(1-4):61-120.

袁家军.卫星结构设计与分析[M].北京:中国宇航出版社, 2004.

YUAN J J. Design and Analysis of Satellite Structures[M]. Beijing:China Astronautic Publishing House, 2004. (in Chinese)

曹乃亮, 董得义, 李志来.基于形状记忆合金的空间分离装置研究进展[J].航天返回与遥感, 2014, 35(5):9-18.

CAO N L, DONG D Y, LI ZH L. Non-pyrotechnic separation devices research based on shape memory alloy[J]. Spacecraft Recovery & Remote Sensing, 2014, 35(5):9-18. (in Chinese)

胡晓楠, 吴君, 彭金圣, 等.基于记忆合金的大承载低冲击解锁机构设计与试验研究[J].科学技术与工程, 2016, 30(16):319-323.

HU X N, WU J, PENG J SH, et al .. Design and experimental research of a large load and low shock release device on shape memory alloy[J]. Science Technology and Engineering, 2016, 30(16) 319-323. (in Chinese)

NASON I, PUIG-SUARI J. Development of a family of picosatellite deployers based on the cubesat standard[C]. The 2002 IEEE Aerospace Conference, IEEE, 2002: 457-464.

MIYAMOTO K, UI K, MATUNAGA S, et al . . Tokyo tech separation demonstration TSD as M-V rocket sub-payload for nanosatellite separation mechanism[C]. The 56th International Astronautical Congress, IAF, 2005: 2271-2277.

宣明, 张道威, 谷松, 等.微小卫星太阳帆板压紧释放机构的设计[J].光学精密工程, 2017, 25(4):979-986.

XUAN M, ZHANG D W, GU S, et al .. Design of hold-down and release mechanism for solar panel of micro-satellite[J]. Opt. Precision Eng., 2017, 25(4):979-986. (in Chinese)

滕来, 金仲和.皮卫星分离参数优化[J].宇航学报, 2016, 37(10):1200-1206.

TENG L, JIN ZH H. Pico-satellite separation parameter optimization[J]. Journal of Astronautics, 2016, 37(10):1200-1206. (in Chinese)

白志富, 果琳丽, 陈岱松.新型非火工星箭连接分离技术[J].导弹与航天运载技术, 2009(1):31-37.

BAI ZH F, GUO L L, CHEN D S. Late-model non-pyrotechnic devices for separation of satellite-launching vehicle[J]. Missile and Space Vehcile, 2009(1):31-37. (in Chinese)

Aerospace, CubeSat Deployer, CubtSat Deployer-PSL family[EB/OL]. http://www.astrofein.com/astro-und-feinwerktechnik-adlershof/products/raumfahrt-eng/193/cubsat-deployer-engl/ http://www.astrofein.com/astro-und-feinwerktechnik-adlershof/products/raumfahrt-eng/193/cubsat-deployer-engl/ . (2015-01-06).

桑希军. 小卫星星箭分离系统设计及性能分析[D]. 长沙: 国防科学技术大学, 2014.

SANG X J. The Design and Performance Analysis for Separation System of Small Satellite from Rocket[D]. Changsha: Graduate School of National University of Defense Technology, 2014. (in Chinese)

姜晗. 基于涡卷弹簧缠绕自锁性能的锁紧释放装置研制[D]. 哈尔滨: 哈尔滨工业大学, 2016.

JIANG H. The Hold-on Release Device Based on Vortex Coil Spring Winging Self-locking Principle[D]. Harbin: Harbin Institute of Technology, 2016. (in Chinese)

刘强, 房建成, 韩邦成.磁悬浮飞轮锁紧保护技术研究与发展现状[J].光学精密工程, 2014, 22(9):2465-2475.

LIU Q, FANG J CH, HAN B CH. Research and development status of locking protection technologies for magnetic bearing flywheels[J]. Opt. Precision Eng., 2014, 22(9):2465-2475. (in Chinese)

刘强, 房建成.磁悬浮飞轮用可重复抱式锁紧装置[J].光学精密工程, 2012, 20(8):1802-1810.

LIU Q, FANG J CH. Repeated clamping locking device for magnetic bearing flywheel[J]. Opt. Precision Eng., 2012, 20(8):1802-1810. (in Chinese)

彭科容, 何卫国.基于无刷直流电机一体化设计的舵面电磁锁制系统设计[J].微电机, 2015, 48(5):95-97.

PENG K R, HE W G. Design of control surface electromagnetic lock-apparatus system based on integration with BLDCM[J]. Micromotors, 2015, 48(5):95-97. (in Chinese)

吴帅, 彭传龙, 焦宗夏, 等.比例阀线性双向电磁铁设计与试验研究[J].机械工程学报, 2014, 50(22):200-206.

WU SH, PENG CH L, JIAO Z X, et al .. Design and experimental research of the linear bi-directional force solenoid for electro-hydraulic proportional valve[J]. Journal of Mechanical Engineering, 2014, 50(22):200-206. (in Chinese)

龚斌.比例电磁铁静态特性的研究[J].液体传动与控制, 2017(2):25-32, 35.

GONG B. Research on proportional solenoid's static characteristics[J]. Fluid Power Transmission & Control, 2017(2):25-32, 35. (in Chinese)

Views

581

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Kinematics and dynamics of 2UU-PSU upper limb rehabilitation mechanism

Inverse dynamics modeling of 3-RPS/3n-SPS parallel mechanism with redundant limbs

Inverse dynamic modeling and control of spatial rigid-flexible parallel manipulator

Design and verification of kinematic system in deploying mechanism for CubeSats

Effect of flow etching method on wet etching properties of silica optical fiber

Related Author

GUI Xiaogeng

DU Yilun

WU Weiying

SHANG Lin

AN Fuxin

LI Wenjing

CUI Bingyan

Yu-ming ZHAO

Related Institution

Huadian Heavy Industries Co.，LTD.

College of Mechanical Engineering， North China University of Science and Technology

School of Mechanical Engineering, Yan Shan University

Heilongjiang Agricultural Economy Vocational College

Heavy-duty Intelligent Manufacturing Equipment Innovation Center of Hebei Province

AI问答

Address：No.3888 Dong Nanhu Road, Changchun, Jilin, China Postal code：130033
Tel：0431-86176855 Email：gxjmgc@ciomp.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 吉ICP备11002662号-17 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰