Progress on precision glass molding

Feng GONG; Kang-sen LI; Chao YAN

doi:10.3788/OPE.20182606.1380

您当前的位置：

首页 >

文章列表页 >

Progress on precision glass molding

Micro/Nano Technology and Fine Mechanics | 更新时间：2020-07-05

- Progress on precision glass molding
- Optics and Precision Engineering Vol. 26, Issue 6, Pages: 1380-1391(2018)
- 作者机构：
  
  深圳大学机电与控制工程学院广东省微纳光机电工程技术重点实验室, 广东深圳 518060
- 作者简介：
- 基金信息：
- DOI：10.3788/OPE.20182606.1380
  CLC： TB133
- Received：25 September 2017，
  
  Accepted：06 November 2017，
  
  Published：25 June 2018
- 稿件说明：
移动端阅览
Feng GONG, Kang-sen LI, Chao YAN. Progress on precision glass molding[J]. Optics and precision engineering, 2018, 26(6): 1380-1391.
DOI：

Feng GONG, Kang-sen LI, Chao YAN. Progress on precision glass molding[J]. Optics and precision engineering, 2018, 26(6): 1380-1391. DOI： 10.3788/OPE.20182606.1380.

摘要

玻璃精密模压成形是一种高效率、绿色环保的先进光学元件制造技术，近年来得到了飞速发展。本文首先介绍了光学元件的需求与种类，提出玻璃精密模压成形技术存在的问题。综述了国内外近年来精密模压成形光学透镜的重要研究进展，其中包括光学玻璃材料、模具材料与涂层、模具加工、模压过程仿真以及各种参数对透镜质量的影响。阐述了光学模压成形元件的坯料、镀膜技术和冷加工技术、成形元件的残余应力分布以及折射率、模具与玻璃间摩擦效应、模具的补偿技术、成形透镜质量的预测、模压技术的其他应用等。最后，对未来光学玻璃精密模压成形趋势进行了预测。

Abstract

Precision glass molding is a high-efficiency and green optical component manufacturing technology that has seen rapid development in recent years. First

the types of optical components and their demand were discussed

and the problem associated with glass precision molding technology was described. Then

research and development of molded optical components in recent years were reviewed. This research included studies of optical glass materials

a constitutive model of glass material

mold materials

coatings

ultraprecision machining

numerical simulation

and the influence of various parameters on the quality of a molded lens. This research also covers technology for the precision molding of optical components

cold-machining technology

coating technology for molds

stress distribution and refractive index of molded components

friction between molds and glass

mold compensation

molded-lens quality prediction

and applications of molding technology. Finally

the future development of precision glass molding was predicted.

关键词

Keywords

references

王慧军, 张飞虎, 赵航, 等.超声波磁流变复合抛光中几种工艺参数对材料去除率的影响[J].光学精密工程, 2007, 15(10):1583-1588.

WANG H J, ZHANG F H, ZHAO H, et al.. Effect of several processing parameters on material removal ratio in ultrasonic magnetorheological compound finishing[J]. Opt. Precision Eng., 2007, 15(10):1583-1588. (in Chinese)

侯晶, 王洪祥, 陈贤华, 等.大口径平面光学元件的磁流变加工[J].光学精密工程, 2016, 24(12):3054-3060.

HUO J, WANG H X, CHEN X H, et al.. Magnetorheological processing for large aperture plane optical elements[J]. Opt. Precision Eng., 2016, 24(12):3054-3060. (in Chinese)

YI A Y, CHEN Y, KLOCKE F, et al.. A high volume precision compression molding process of glass diffractive optics by use of a micromachined fused silica wafer mold and low Tg optical glass[J]. Journal of Micromechanics & Microengineering, 2006, 16(10):2000-2005.

ANANTHASAYANAM B, JOSEPH P F, JOSHI D, et al.. Final shape of precision molded optics:Part Ⅰ-Computational approach, material definitions and the effect of lens shape[J]. Journal of Thermal Stresses, 2012, 35(6):550-578.

SAOTOME Y, IMAI K, SAWANOBORI N. Microformability of optical glasses for precision molding[J]. Journal of Materials Processing Technology, 2003, 140(1):379-384.

SARHADI A, HATTEL J H, HANSEN H N. Three-dimensional modeling of glass lens molding[J]. International Journal of Applied Glass Science, 2015, 6(2):182-195.

KLIOCKE F, DAMBON O, LIU G, et al.. Analysis of wear of fused silica moulding using glassy carbon moulds[J]. Production Engineering, 2016, 10(4):367-374.

TSAI Y C, HUNG C, HUNG J C. Glass material model for the forming stage of the glass molding process[J]. Journal of Materials Processing Technology, 2008, 201(1):751-754.

HUANG C Y, KUO C H, HSIAO W T, et al.. Glass biochip fabrication by laser micromachining and glass-molding process[J]. Journal of Materials Processing Technology, 2012, 212(3):633-639.

LIN C H, DUH J G, YAU B S. Processing of chromium tungsten nitride hard coatings for glass molding[J]. Surface and Coatings Technology, 2006, 201(3):1316-1322.

尹韶辉, 王玉方, 朱科军, 等.微小非球面玻璃透镜超精密模压成型数值模拟[J].光子学报, 2010, 39(11):2020-2024.

YIN SH H, WANG Y F, ZHU J K, et al.. Numerical simulation of ultra-precision glass molding for micro aspherical glass lens[J]. Acta Photonica Sinica, 2010, 39(11):2020-2024.(in Chinese)

尹韶辉, 唐昆, 朱勇建, 等.小口径玻璃透镜热压成形模具的超精密微细磨削加工[J].中国机械工程, 2008(23):2790-2792.

YIN SH H, TANG K, ZHU Y J, et al.. Fabrication of micro glass lens mould by using ultra-precision micro-grinding process[J]. China Mechanical Engineering, 2008(23):2790-2792. (in Chinese)

ZHAO W, CHEN Y, SHEN L, et al.. Investigation of the refractive index distribution in precision compression glass molding by use of 3D tomography[J]. Measurement Science and Technology, 2009, 20(5):055109.

ZHOU J, HE P, YU J, et al.. Investigation on the friction coefficient between graphene-coated silicon and glass using barrel compression test[J]. Journal of Vacuum Science & Technology B, 2015, 33(3):031213.

周天丰, 解加庆, 刘洋, 等.光学玻璃微沟槽模压成形仿真与试验研究[J].光学精密工程, 2016, 24(10s):446-453.

ZHOU T F, XIE J Q, LIU Y, et al.. Simulation and experimental study on the molding process for microgroveson optical glass[J]. Opt. Precision Eng., 2016, 24(10s):446-453. (in Chinese)

YAMAMOTO H, NAITO T, NAMEKAWA T, et al. . Glass material: US, US20040170797A1[P]. 2004.

聂兰舰, 王玉芬, 向在奎, 等.高性能光学合成石英玻璃的制备和应用[J].光学精密工程, 2016, 24(12):2916-2924.

NIE L J, WANG Y F, XIANG Z K, et al.. Preparation and application of high-performance synthetic optical fused silica glass[J]. Opt. Precision Eng., 2016, 24(12):2916-2924. (in Chinese)

花宁, 李怀阳, 王友军, 等.石英玻璃晶圆的加工工艺[J].红外与激光工程, 2016, 45(2):96-100.

HUA N, LI H Y, WANG Y J, et al.. Processing techniques of quartz glass wafer[J]. Infrared and Laser Engineering, 2016, 45(2):96-100. (in Chinese)

RICHTER F, HOFFMANN H J. Comment on "viscosity measurement by cylindrical compression for numerical modeling of precision lens molding process" by A. Jain, G. C. Firestone, and A. Y. Yi[J]. Journal of the American Ceramic Society, 2007, 90(9):3017-3018.

MEINHARD H, FRNZEL W, GRAU P. Viscosity of glass below the transformation temperature[J]. Glass Science and Technology -Frankfurt am Main-, 2001, 74(1):6-16.

NARAYANASWAMY O S. A model of structural relaxation in glass[J]. Journal of the American Ceramic Society, 1971, 54(10):491-498.

JAIN A, FIRESTONE G C, YI A Y. Viscosity measurement by cylindrical compression for numerical modeling of precision lens molding process[J]. Journal of the American Ceramic Society, 2005, 88(9):2409-2414.

JAIN A, YI A Y, XIE X, et al.. Finite element modelling of stress relaxation in glass lens moulding using measured, temperature-dependent elastic modulus and viscosity data of glass[J]. Modelling and Simulation in Materials Science and Engineering, 2006, 14(3):465-477.

ZHOU T, YAN J, MASUDA J, et al.. Investigation on the viscoelasticity of optical glass in ultraprecision lens molding process[J]. Journal of Materials Processing Technology, 2009, 209(9):4484-4489.

ZHOU T, ZHOU Q, XIE J, et al.. Elastic-viscoplasticity modeling of the thermo-mechanical behavior of chalcogenide glass for aspheric lens molding[J]. International Journal of Applied Glass Science, 2017, 9(2):252-262.

ANANTHASAYANAM B, JOSEPH P F, JOSHI D, et al.. Final shape of precision molded optics:Part Ⅱ-validation and sensitivity to material properties and process parameters[J]. Journal of Thermal Stresses, 2012, 35(7):614-636.

SARHADI A, HATTEL J H, HANSEN H N. Evaluation of the viscoelastic behaviour and glass/mould interface friction coefficient in the wafer based precision glass moulding[J]. Journal of Materials Processing Technology, 2014, 214(7):1427-1435.

ZHOU J, YU J, LEE L J, et al.. Stress relaxation and refractive index change of As 2 S 3 in compression molding[J]. International Journal of Applied Glass Science, 2016, 8(3):255-265.

LIU W D, ZHANG L C. Understanding the formation mechanism of residual stress during precision glass moulding[J]. Key Engineering Materials, 2014, 626:182-186.

JAIN A. Finite element modeling of structural relaxation during annealing of a precision-molded glass lens[J]. Journal of Manufacturing Science and Engineering, 2006, 128(3):683-690.

KEAR B H, MCCANDLISH L E. Chemical processing and properties of nanostructured WC-Co materials[J]. Nanostructured Materials, 1993, 3(1):19-30.

ZHOU T, YAN J, LIANG Z, et al.. Development of polycrystalline Ni-P mold by heat treatment for glass microgroove forming[J]. Precision Engineering, 2015, 39:25-30.

RIESER D, SPIE G, MANNS P. Investigations on glass-to-mold sticking in the hot forming process[J]. Journal of Non-Crystalline Solids, 2008, 354(12):1393-1397.

CHANG K C, YANG H W, HSIAO Y C, et al.. Microstructure evolution and surface characteristics of NiP and CrN composite coatings under phosphate glasses molding process[J]. Surface and Coatings Technology, 2010, 205(5):1225-1228.

CHEN Y I, CHENG Y R, CHANG L C, et al.. Chemical inertness of Cr-W-N coatings in glass molding[J]. Thin Solid Films, 2015, 593:102-109.

CHAO C L, HUO C B, CHOU W C, et al.. Study on the design of precious metal based protective films for glass moulding process[J]. Surface and Coatings Technology, 2013, 231:567-572.

ZHU X Y, WEI J J, CHEN L X, et al.. Anti-sticking Re-Ir coating for glass molding process[J]. Thin Solid Films, 2015, 584:305-309.

SAKURAI J, HATA S, YAMUCHI R, et al.. Searching for Pt-Zr-Ni thin film amorphous alloys for optical glass lenses molding materials[J]. Precision Engineering, 2010, 34(3):431-439.

KLEER G, DOELL W. Ceramic multilayer coatings for glass moulding applications[J]. Surface and Coatings Technology, 1997, 94(97):647-651.

KLOCKE F, DAMBON O, ROHWERDER M, et al.. Model of coating wear degradation in precision glass molding[J]. International Journal of Advanced Manufacturing Technology, 2016, 87(1):1-7.

KLOCKE F, DAMBON O, GEORGIADIS K. Comparison of nitride and noble metal coatings for precision glass molding tools[J]. Key Engineering Materials, 2010, 438:9-16.

尹韶辉, 陈逢军, 龚胜, 等.小口径非球面光学玻璃透镜模具超精密数控复合机床的研发与应用[J].世界制造技术与装备市场, 2016(4):24-29.

YIN SH H, CHEN F J, GONG SH, et al.. Research and application of micro aspherical glass lens mould by using ultra-precision composite machine[J]. World Manufacturing Engneering & Market, 2016(4):24-29.(in Chinese)

YAN J, OOWADA T, ZHOU T, et al.. Precision machining of microstructures on electroless-plated NiP surface for molding glass components[J]. Journal of Materials Processing Technology, 2009, 209(10):4802-4808.

YAN J, ASAMI T, HARADA H, et al.. Fundamental investigation of subsurface damage in single crystalline silicon caused by diamond machining[J]. Precision Engineering, 2009, 33(4):378-386.

YAN J, ZHANG Z, KURIYAGAWA T. Mechanism for material removal in diamond turning of reaction-bonded silicon carbide[J]. International Journal of Machine Tools and Manufacture, 2009, 49(5):366-374.

ZHANG Z, PENG H, YAN J. Micro-cutting characteristics of EDM fabricated high-precision polycrystalline diamond tools[J]. International Journal of Machine Tools and Manufacture, 2013, 65(65):99-106.

HE P, LI L, LI H, et al.. Compression molding of glass freeform optics using diamond machined silicon mold[J]. Manufacturing Letters, 2014, 2(2):17-20.

YI A Y, LI L. Design and fabrication of a microlens array by use of a slow tool servo[J]. Optics Letters, 2005, 30(13):1707-1709.

CHEN Y, YI A Y, SU L, et al.. Numerical simulation and experimental study of residual stresses in compression molding of precision glass optical components[J]. Journal of Manufacturing Science and Engineering, 2008, 130(5):051012.

YI A Y, TAO B, KLOCKE F, et al.. Residual stresses in glass after molding and its influence on optical properties[J]. Procedia Engineering, 2011, 19(1):402-406.

TAO B, SHEN L, YI A, et al.. Reducing refractive index variations in compression molded lenses by annealing[J]. Optics and Photonics Journal, 2013, 3(2):118-121.

TAO B, HE P, SHEN L, et al.. Annealing of compression molded aspherical glass lenses[J]. Journal of Manufacturing Science and Engineering, 2013, 136(1):011008.

SARHADI A, HATTEL J H, HANSEN H N. Three-dimensional modeling of glass lens molding[J]. International Journal of Applied Glass Science, 2015, 6(2):182-195.

尹韶辉, 霍建杰, 周天丰, 等.小口径非球面透镜模压成形加热加压参数仿真[J].湖南大学学报:自然科学版, 2011, 38(1):35-39.

YIN SH H, HUO J J, ZHOU T F, et al.. Simulation of the heating and pressing parameters of micro-aspheric lens molding process[J]. Journal of Hunan University:Natural Sciences, 2011, 38(1):35-39. (in Chinese)

张小兵, 尹韶辉, 朱科军, 等.基于结构松弛理论的非球面透镜退火模拟[J].兵器材料科学与工程, 2013, 36(5):1-5.

ZHAN X B, YIN SH H, ZHU K J, et al.. Annealing simulation of aspherical glass lenses based on structure relation theory[J]. Ordance Material Science and Engineering, 2013, 36(5):1-5. (in Chinese)

YI A Y, JAIN A. Compression molding of aspherical glass lenses-A combined experimental and numerical analysis[J]. Journal of the American Ceramic Society, 2005, 88(3):579-586.

ZHOU J, LI M, HU Y, et al.. Numerical evaluation on the curve deviation of the molded glass lens[J]. Journal of Manufacturing Science and Engineering, 2014, 136(5):051004.

SU L, WANG F, HE P, et al.. An integrated solution for mold shape modification in precision glass molding to compensate refractive index change and geometric deviation[J]. Optics and Lasers in Engineering, 2014, 53(2):98-103.

MAHAJAN P, DORA P T, SANDEEP T S, et al.. Optimized design of optical surface of the mold in precision glass molding using the deviation approach[J]. International Journal for Computational Methods in Engineering Science and Mechanics, 2015, 16(1):53-64.

SU L, CHEN Y, YI A Y, et al.. Refractive index variation in compression molding of precision glass optical components[J]. Applied Optics, 2008, 47(10):1662-1667.

SU L, HE P, YI A Y. Investigation of glass thickness effect on thermal slumping by experimental and numerical methods[J]. Journal of Materials Processing Technology, 2011, 211(12):1995-2003.

DORA P T, RAMESH K, MAHAJAN P, et al.. Numerical modeling of cooling stage of glass molding process assisted by CFD and measurement of residual birefringence[J]. Journal of the American Ceramic Society, 2016, 99(2):470-483.

PALLICITY T D, VU A T, RAMESH K, et al.. Birefringence measurement for validation of simulation of precision glass molding process[J]. Journal of the American Ceramic Society, 2017, 100(10):4680-4698.

ZHAO W, CHEN Y, SHEN L, et al.. Refractive index and dispersion variation in precision optical glass molding by computed tomography[J]. Applied Optics, 2009, 48(19):3588-3595.

MOSADDEGH P, ZIEGERT J, IQBAL W, et al.. Apparatus for high temperature friction measurement[J]. Precision Engineering, 2011, 35(3):473-483.

MOSADDEGH P, ZIEGERT J C. Friction measurement in precision glass molding:An experimental study[J]. Journal of Non-Crystalline Solids, 2011, 357(16):3221-3225.

FISCHBACH K D, GEORGIADIS K, WANG F, et al.. Investigation of the effects of process parameters on the glass-to-mold sticking force during precision glass molding[J]. Surface and Coatings Technology, 2010, 205(2):312-319.

DUKWEN J, FRIEDRICHS M, LIU G, et al.. Tribological wear analysis and numerical lifetime prediction of glassy carbon tools in fused silica molding[J]. Wear, 2016, 364:144-153.

IKEDA H, KASA H, NISHIYAMA H, et al.. Evaluation of demolding force for glass-imprint process[J]. Journal of Non-Crystalline Solids, 2014, 383(1):66-70.

ANANTHASAYANAM B, JOSHI D, STAIRIKER M, et al.. High temperature friction characterization for viscoelastic glass contacting a mold[J]. Journal of Non-Crystalline Solids, 2014, 385(2):100-110.

ZHOU T, YAN J, YOSHIHARA N, et al.. Study on nonisothermal glass molding press for aspherical lens[J]. Journal of Advanced Mechanical Design Systems and Manufacturing, 2010, 4(5):806-815.

KREILKAMP H, VU A T, DAMBON O, et al.. Replicative manufacturing of complex lighting optics by non-isothermal glass molding[J].Polymer Optics and Molded Glass Optics:Design, Fabrication and Materials, 2016.

VU A T, KREILKAMP H, KRISHNAMOORTHI B J, et al. . A hybrid optimization approach in non-isothermal glass molding[C]. Esaform 2016: Proceedings of the International Esaform Conference on Material Forming, 2016: 040006.

LI H, HE P, YU J, et al.. Localized rapid heating process for precision chalcogenide glass molding[J]. Optics and Lasers in Engineering, 2015, 73:62-68.

XIE J, ZHOU T, LIU Y, et al.. Mechanism study on microgroove forming by ultrasonic vibration assisted hot pressing[J]. Precision Engineering, 2016, 46:270-277.

ZHOU T, XIE J, YAN J, et al.. Improvement of glass formability in ultrasonic vibration assisted molding process[J]. International Journal of Precision Engineering and Manufacturing, 2017, 18(1):57-62.

XIE J, ZHOU T, RUAN B, et al.. Effects of interface thermal resistance on surface morphology evolution in precision glass molding for microlens array[J]. Applied Optics, 2017, 56(23):6622-6630.

CHEN Y, YI A Y, YAO D, et al.. A reflow process for glass microlens array fabrication by use of precision compression molding[J]. Journal of Micromechanics and Microengineering, 2008, 18(18):55022.

HUANG C Y, KUO C H, HSIAO W T, et al.. Glass biochip fabrication by laser micromachining and glass-molding process[J]. Journal of Materials Processing Technology, 2012, 212(3):633-639.

Views

1050

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experimental study on rolling microchannel and nanochannel in chip materials by diamond

Formation mechanism and suppression method of hole edge damage in drilling optical glass

Interactive effect of micro-cracks in optical glass under multi-indentations tests

Interactive effects of micro-cracks in optical glass under multi-indentation tests

Simulation and experimental study on the molding process for microgrooveson optical glass

Related Author

CHEN Rong

XIE Jin

CHEN Zhaojie

ZHOU Cong

Jian-xiu SU

Zhan-kui WANG

Hai-tao QU

Hong-wen LIU

Related Institution

School of Mechanical and Automotive Engineering， South China University of Technology

Guangdong University of Science and Technology

School of Mechanical and Electrical Engineering, Henan Institute of Science and Technology

School of Mechatronic Engineering, Harbin Institute of Technology

Research Center of Laser Fusion, China Academy of Engineering Physics

AI问答

Address：No.3888 Dong Nanhu Road, Changchun, Jilin, China Postal code：130033
Tel：0431-86176855 Email：gxjmgc@ciomp.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 吉ICP备11002662号-17 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰