Microfluidic inertial switch with high threshold and long pulse-width response

Jia-jie LI; Wei-rong NIE; Guo-wei LIU

doi:10.3788/OPE.20192701.0101

您当前的位置：

首页 >

文章列表页 >

Microfluidic inertial switch with high threshold and long pulse-width response

Micro/Nano Technology and Fine Mechanics | 更新时间：2020-08-13

- Microfluidic inertial switch with high threshold and long pulse-width response
- Optics and Precision Engineering Vol. 27, Issue 1, Pages: 101-109(2019)
- 作者机构：
  
  南京理工大学机械工程学院，江苏南京 210094
- 作者简介：
- 基金信息：
- DOI：10.3788/OPE.20192701.0101
  CLC： TM564; TH824.4
- Received：07 June 2018，
  
  Accepted：01 August 2018，
  
  Published：25 January 2019
- 稿件说明：
移动端阅览
Jia-jie LI, Wei-rong NIE, Guo-wei LIU. Microfluidic inertial switch with high threshold and long pulse-width response[J]. Optics and precision engineering, 2019, 27(1): 101-109.
DOI：

Jia-jie LI, Wei-rong NIE, Guo-wei LIU. Microfluidic inertial switch with high threshold and long pulse-width response[J]. Optics and precision engineering, 2019, 27(1): 101-109. DOI： 10.3788/OPE.20192701.0101.

摘要

为了实现智能武器电源管理，针对正常发射和勤务跌落两种典型的加速度信号，提出了一种高阈值长脉宽响应的微流体惯性开关。该开关主要由环形微通道和三级毛细阀组成，具有识别两种典型加速度的能力，并在正常发射后坐加速度的作用下实现可靠接通。首先，介绍了开关的设计概念及工作原理。然后，采用湿法刻蚀和磁控溅射金属技术制作了样机。最后，结合有限元仿真和样机实验验证了开关的功能。有限元仿真分析表明：该开关在幅值为12 000

，脉宽为300 μs的勤务跌落载荷下保持断开，在幅值为20 000

，脉宽为4 ms的后坐载荷下可靠接通，开关阈值为3 300

。实验结果表明：该开关在幅值为12 800

，脉宽为219 μs的勤务跌落载荷下保持断开，开关的静态阈值为3 257.2

~3 317.3

开关的理论阈值为3 590.9

，理论公式能较好地预测开关的阈值。

Abstract

In order to realize the power management of intelligent weapons

a microfluidic inertial switch with a high threshold and long pulse width response was proposed for two typical acceleration signals of launch and drop. The switch is mainly composed of a circular microchannel and a three-stage capillary valve that has the ability to identify the two typical accelerations and can be reliably connected under the action of the normal launching acceleration. First

the design concept of the switch was introduced

and the working principle of the switch was analyzed. Next

the prototype was fabricated by wet etching and magnetron sputtering. Finally

the function of the switch was verified by finite element simulation and prototype experiments. The finite element simulation analysis shows that the switch remains disconnected under the drop load (amplitude: 12 000

pulse width: 300 μs) and is reliably connected under the rear load (amplitude: 20 000

pulse width: 4 ms). The threshold of the switch is 3 300

. The experimental results show that the switch remains disconnected under the service drop load (amplitude: 12 800

pulse width: 219 μs). The static threshold of the switch is 3 257.2~3 317.3

. The theoretical threshold of the switch is 3 590.9

and the theoretical formula can predict the threshold of the switch with a higher accuracy. The results show that the designed switch can identify two typical accelerations and realize reliable connections.

关键词

Keywords

references

步超, 聂伟荣, 罗乔, 等.齿形结构的长脉冲敏感型微加速度开关[J].光学精密工程, 2016, 24(11):2730-2737.

BU CH, NIE W R, LUO Q, et al .. Micro acceleration switch with tooth-shaped structure for long pulse sensitivity[J]. Opt. Precision Eng ., 2016, 24(11):2730-2737. (in Chinese)

CAO Y, XI Z W, YU P X, et al .. A MEMS inertial switch with a single circular mass for universal sensitivity[J]. Journal of Micromechanics & Microengineering , 2015, 25(10): 105005.

CHEN W G, WANG Y, DING G F, et al .. Simulation, fabrication and characterization of an all-metal contact-enhanced triaxial inertial microswitch with low axial disturbance[J] . Sensors & Actuators A Physical , 2014, 220(4636):194-203.

GERSON Y, SCHREIBER D, GRAU H, et al .. Meso scale MEMS inertial switch fabricated using an electroplated metal-on-insulator process[J]. Journal of Micromechanics & Microengineering , 2014, 24(2): 025008.

ALMEIDA L, RAMADOSS R, JACKSON R, et al .. Study of the electrical contact resistance of multi-contact MEMS relays fabricated using the MetalMUMPs process[J]. Journal of Micromechanics & Microengineering , 2006, 16(7): 1189-1194.

YOO K, KIM J. A novel configurable MEMS inertial switch using microscale liquid-metal droplet[C]. International Conference on Micro Electro Mechanical Systems IEEE , 2009: 793-796.

YOO K, PARK U, KIM J. Development and characterization of a novel configurable MEMS inertial switch using a microscale liquid-metal droplet in a microstructured channel[J]. Sensors & Actuators A Physical , 2011, 166(2):234-240.

USUNG P, KWANGHYUN Y, JOONWON K. Development of a MEMS digital accelerometer (MDA) using a microscale liquid metal droplet in a microstructured photosensitive glass channel[J]. Sensors & Actuators A Physical , 2010, 159(1):51-57.

SHEN T, ZHANG D, HUANG L, et al .. An automatic-recovery inertial switch based on a gallium-indium metal droplet[J]. Journal of Micromechanics & Microengineering, 2016, 26(11):115016.

HUANG Y, SUNG W, LAI W, et al .. Design and implementation of time-delay switch triggered by inertia load[C]. International Conference on MICRO Electro Mechanical Systems IEEE , 2013: 729-732.

KUO J C, YANG Y J. A passive hydrogel-based inertial switch integrated with micromachined L-C resonator[C]. International Conference on Micro Electro Mechanical Systems IEEE , 2012: 515-518.

KUO J C, KUO P H, LAI Y T, et al .. A passive inertial switch using MWCNT-hydrogel composite with wireless interrogation capability[J]. Journal of Microelectromechanical Systems, 2013, 22(3):646-654.

黄刘, 聂伟荣, 王晓锋, 等.抗高过载微流体惯性开关[J].光学精密工程, 2016, 24(3):526-532.

HUANG L, NIE W R, WANG X F, et al .. A microfluidic inertial switch with response characteristics to high acceleration[J] Opt. Precision Eng ., 2016, 24(3):526-532. (in Chinese)

CHO H, KIM H Y, KANG J Y, et al .. How the capillary burst microvalve works[J]. Journal of Colloid & Interface Science , 2007, 306(2):379-385.

Views

154

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

A microfluidic inertial switch with response characteristics to high acceleration

Related Author

HUANG Liu

NIE Wei-rong

WANG Xiao-feng

SHEN Teng

Related Institution

No data

AI问答

Address：No.3888 Dong Nanhu Road, Changchun, Jilin, China Postal code：130033
Tel：0431-86176855 Email：gxjmgc@ciomp.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 吉ICP备11002662号-17 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰