To dynamically measure a two-dimensional rotation angle and overcome the shortcomings of a complicated structure and high costs
a method based on laser collimation was proposed and a measurement system was established. First
a method was proposed based on the key measurement requirements. A collimated laser was used as a measurement datum and a remote position detector as a detection device. Second
a measurement system was developed
each module was designed
and the main modules were optimized. Third
the model was established completely after an algorithm was produced. Finally
tests were performed and the obtained data were analyzed within ± 2°. The experimental results show that the stability of the system is positive
the measurement repeatability error is 1
μ
rad
the
X
-and
Y
-axis nonlinearity errors are 1.8% and 1.7%
respectively
and the dynamic band response frequency is better than 200 Hz within ± 0.01°. The study confirms that the system basically offers high precision
high repeatability
high stability
and a dynamic measurement of a two-dimensional rotation angle.
ZHOU H F, GONG A L. Optical methods of small angle measurement[J]. Journal of Yunnan University for Nationalities: Natural Science , 2006, 15 (2): 130-133. (in Chinese)
LI J Y, WU J T, HAN H Q. Optical method and application of small angle measurement[J]. Applied Science and Technology , 2006, 33 (7): 15-18. (in Chinese)
WANG M, GAO ZH H. Error analysis of structural parameters of circular grating[J]. Machinery Manufacturing and Automation , 2017, 46 (2): 9-12, 40. (in Chinese)
GENG X. Based on the Principle of Internal Reflection Measurement of Small-angle Changes in the Technical Research [D]. Nanjing: Nanjing University of Science and Technology, 2015. (in Chinese)
SHAO J Q, JIANG M, XU Y, et al .. Discussion on the method of calibrating the rotation angle measuring device by using optical indexing head[J]. Industrial Measurement , 2016 (S1): 72. (in Chinese)
WANG G P, CHEN G L, CHEN Y L. Laser interferometry digital angle measurement method and its application[J]. Opt. Precision Eng., 2001, 9 (1): 85-88. (in Chinese)
TIAN L D, ZHAO J K, WANG T, et al .. Influence of attitude and attitude mismatch of test equipment on circle indexing errors measured by self-collimator[J]. Opt. Precision Eng., 2017, 25(9): 2267-2276. (in Chinese)
SUZUKI T, GREIVENKAMP J E, SASAKI O. Wide-range two-dimensional small rotation-angle measurement by use of fringe projection[J]. SPIE, 2005, 5633:580662.
SUZUKI T, ENDO T, SASAKI O, et al .. Two-dimensional small-rotation-angle measurement using an imaging method[J]. Optical Engineering , 2015, 45(4):7-13.
SASAKI, OSAMI. Two-dimensional rotation angle measurement using a sinusoidal phase-modulating laser diode interferometer[J]. Optical Engineering , 2003, 42(4):1132-1136.
CHEN SH L, LI H R. Laser collimator and its application in industry[J]. Journal of Nanchang University: Engineering and Technology , 1980(2): 25-32. (in Chinese)
Suppression of effects of air random disturbances in laser collimation measurements
Design of high-accuracy laser beam collimation system
Current status and trends in precision reducer lost motion measurement
Real-time measurement of ship′s transverse and vertical twist angles by dynamic horizontal datum measuring system
Design for three-dimensional facialexpression acquiring system
Related Author
LIU Xiaojun
DIAO Kuan
ZHAO Haiyu
Jiu-bin TAN
Fan ZHU
Ying-xian LI
Hang XU
Zhao-yao SHI
Related Institution
School of Mechanical Science and Engineering, Huazhong University of Science and Technology
Center of Ultra-precision Optoelectronic Instrument Engineering, Harbin Institute of Technology
China Software Testing Center, Development Research Center of Computer and Microelectronics, Ministry of Industry and Information Technology
Beijing Engineering Research Center of Precision Measurement Technology and Instruments, College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology
Changchun Institute of Optics, Fine Mechanics and Physics,Chinese Academy of Sciences2. University of Chinese Academy of Sciences3. Changchun Institute of Optics, Fine Mechanics and Physics