Xun YANG, Shu-yan XU, Hong-cai MA, et al. Influence of radial temperature gradient on surface figure of lightweight reflective mirror[J]. Optics and precision engineering, 2019, 27(7): 1552-1560.
DOI:
Xun YANG, Shu-yan XU, Hong-cai MA, et al. Influence of radial temperature gradient on surface figure of lightweight reflective mirror[J]. Optics and precision engineering, 2019, 27(7): 1552-1560. DOI: 10.3788/OPE.20192707.1552.
Influence of radial temperature gradient on surface figure of lightweight reflective mirror
To analyze the effects of radial temperature gradients on the surface figures of lightweight reflective mirrors
a 2-m-aperture lightweight mirror of a space camera was taken as the research object and a finite element model of the mirror was established. The effects of different radial temperature gradients and lightweight structures on the surface figure Root Mean Square (RMS) values of reflective mirrors was analyzed
and the accuracies of a simulation method and conclusions were verified through an experiment. In addition
the coupling effects of different lightweight structures and radial temperature gradients on the mirror surface figure were studied. Results show that the surface figure RMS values derived from the radial temperature gradients of different distribution modes can differ by a maximum of 294 times
and the surface shape error caused by the radial gradient is difficult to reduce when optimizing the mirror support scheme. The mirror surface figures of different lightweight structures are different for the radial temperature gradient sensitivities of different distribution modes. The lightweight methods of trefoil and symmetric chamfering are thermally stable to the mirror in a specific radial temperature field distribution mode. Finally
WANG F G, QIAO B, ZHANG J X. Flexible passive support system for 2 m SiC reflective mirror[J]. Opt. Precision Eng ., 2017, 25(10): 2591-2598. (in Chinese)
WANG K J, XUAN M, DONG J H, et al .. Design method of reflector component structure of space remote sensor[J]. Infrared and Laser Engineering , 2016, 45(11): 304-314. (in Chinese)
CHEN H D, CHEN Y H, SHI T T, et al .. Lightweight and mounting design for primary mirror in space camera[J]. Infrared and Laser Engineering , 2014, 43(2): 535-540. (in Chinese)
ZHANG Y Y, JING W, CHENG Y T, et al .. Design and finite element analysis of Φ510 mm SiC ultra-lightweight mirror[J]. Opt. Precision Eng ., 2012, 20(8): 1718-1724. (in Chinese)
LIU SH T, HU R, ZHOU P, et al .. Topologic optimization for configuration design of web-skin-type ground structure based large-aperture space mirror[J]. Opt. Precision Eng ., 2013, 21(7): 1803-1810. (in Chinese)
YUAN J, REN J Y. Improvement and optimization of lightweight structure for SiC reflective mirror[J]. Acta Photonica Sinica , 2015, 44(8): 34-39. (in Chinese)
E. Pearson, L. Stepp. Response of large optical Mirrors to thermal distributions[J]. SPIE , 1987, 748: 215-228.
WANG F G. Study on the influence of temperature and support style to the 1.2m sic primary mirror surface figure[J]. Acta Photonica Sinica , 2011, 40(6): 933-936. (in Chinese)