两步法测量编码器测角误差

佘琳; 冯长有; 丁林辉

doi:null

您当前的位置：

首页 >

文章列表页 >

两步法测量编码器测角误差

测试技术与设备 | 更新时间：2020-08-12

- 两步法测量编码器测角误差
- Measurement of encoder errors with two-step method
- 光学精密工程 2004年12卷第1期页码：66-70
- 作者机构：
  
  1. 中国科学院, 长春光学精密机械与物理研究所, 吉林, 长春, 130033
  2. 中国科学院, 研究生院, 北京, 100039
- 作者简介：
- 基金信息：
  
  国防军工技改项目(No.C02S01S)()
- DOI：
  中图分类号： TP212
- 收稿日期：2003-06-17，
  
  修回日期：2003-11-12，
  
  网络出版日期：2004-02-15，
  
  纸质出版日期：2004-02-15
- 稿件说明：
移动端阅览
佘琳, 冯长有, 丁林辉. 两步法测量编码器测角误差[J]. 光学精密工程, 2004,(1): 66-70

SHE Lin, FENG Chang-you, DING Lin-hui. Measurement of encoder errors with two-step method[J]. Editorial Office of Optics and Precision Engineering, 2004,(1): 66-70
佘琳, 冯长有, 丁林辉. 两步法测量编码器测角误差[J]. 光学精密工程, 2004,(1): 66-70 DOI：

SHE Lin, FENG Chang-you, DING Lin-hui. Measurement of encoder errors with two-step method[J]. Editorial Office of Optics and Precision Engineering, 2004,(1): 66-70 DOI：

摘要

由多面体和自准直仪组成的编码器角度检测系统测量编码器误差

得到的编码器误差中不但包含编码器误差

而且包含多面体检定误差.根据两步法的使用条件

将两步法应用于光电轴角编码器测角误差数据的处理

分别得到多面体检定误差和编码器测角误差

误差分离的结果与采用其他方法得到的结果相近

但用两步法计算需要的测量数据大大减少.比较结果证明

与其他测量方法相比

此方法可以提高测量效率90%以上

缩短检测时间近80%.

Abstract

The encoder errors obtained by measuring the encoder errors with an encoder angular testing system consisting of polyhedrons and an autocollimator

include encoder errors and calibration errors of polyhedrons. According to the conditions for use of two-step method

the two-step method is applied to the processing of photoelectric rotary encoder errors

and the calibration errors of polyhedrons and the encoder errors are separately obtained. The results of error separation are close to the results obtained by other methods

but the volume of data to be measured for use of two-step method is dramatically reduced. The results of comparison show that

in comparison with other methods

this method can be used to improve the measurement efficiency by more than 90%

and shorten the measurement time by nearly 80%.

关键词

Keywords

references

李谋. 位置检测与数显技术[M].北京:机械工业出版社,1993.LI M. Position detection and digimatic techniques[M].Beijing: China Machine Press, 1993.(in Chinese)

HAN X D. Combinational comparative method for determining precision of a digital incremental photoelectric rotary encoder[J].Optics and Precision Engineering, 2001,9(6):80-84.

孙仲康. 快速傅里叶变换及其应用[M].北京:人民邮电出版社,1982.SUN ZH K. Fast Fourier transform algorithm and application[M].Beijing:People Telecommunication Press,1982.(in Chinese)

谭久彬. 精密测量中的误差补偿技术[M].哈尔滨:哈尔滨工业大学出版社,1995.TAN J B. Error compensation techniques for precision measurement[M].Harbin:Harbin Institute of Technology Press,1995.(in Chinese)

曹麟祥. 圆度检测技术[M].北京:国防工业出版社,1998.CAO L X. Roundness measurement and verification techniques[M].Beijing:National Defense Industry Press,1998.(in Chinese)

洪迈生. 三点法误差分离技术中的两个基本问题[J].计量技术,1994,(1):5-6.HONG M SH. Two base problems about three points method for error separation[J].Measuring Technique,1994,(1):5-6.(in Chinese)

毛英泰. 误差理论与精度分析[M].北京:国防工业出版社,1982.MAO Y T. Error algorithm and accuracy analysis[M].Beijing:National Defense Industry Press,1982.(in Chinese)

浏览量

424

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

圆光栅配合自准直仪测量主轴径向运动误差

大尺寸反射式光栅拼接技术的研究进展

大口径非球面反射镜误差分离组合加工技术

大型光学设备检测中大口径平行光管波像差的消除

用于影像仪测量误差分离的自校准技术