基于改进Smith预估器的显微视觉伺服

谢 晖; 孙立宁; 荣伟彬

doi:null

您当前的位置：

首页 >

文章列表页 >

基于改进Smith预估器的显微视觉伺服

更新时间：2020-08-12

- 基于改进Smith预估器的显微视觉伺服
- Visual servoing with modified Smith predictor for micromanipulation
- 光学精密工程 2006年14卷第2期页码：285-290
- 作者机构：
  
  哈尔滨工业大学机器人研究所,黑龙江哈尔滨,150001
- 作者简介：
- 基金信息：
- DOI：
  中图分类号： TP242.62
- 收稿日期：2005-08-19，
  
  修回日期：2005-10-24，
  
  网络出版日期：2006-04-30，
  
  纸质出版日期：2006-04-30
- 稿件说明：
移动端阅览
谢晖, 孙立宁, 荣伟彬. 基于改进Smith预估器的显微视觉伺服[J]. 光学精密工程, 2006,14(2):285-290.

XIE Hui, SUN Li-Ning, RONG Wei-bin. Visual servoing with modified Smith predictor for micromanipulation[J]. Optics and precision engineering, 2006, 14(2): 285-290.
谢晖, 孙立宁, 荣伟彬. 基于改进Smith预估器的显微视觉伺服[J]. 光学精密工程, 2006,14(2):285-290. DOI：

XIE Hui, SUN Li-Ning, RONG Wei-bin. Visual servoing with modified Smith predictor for micromanipulation[J]. Optics and precision engineering, 2006, 14(2): 285-290. DOI：

摘要

针对视觉延迟的问题

提出采用改进的Smith预估器(MSP)来改善视觉伺服系统的控制品质。在对基于位置的动态"look-and-move" 视觉伺服系统特性分析的基础上

建立了基于MSP视觉伺服系统的结构

同时建立了视觉伺服系统的分时模型。在微操作机器人平台上进行了点到点、抗干扰和微齿轮的跟踪抓取实验。结果表明

与只有PID控制器的视觉伺服系统相比

带MSP的视觉伺服系统具有更好的控制品质。克服了由于图像采集、传输和处理导致的视觉伺服延迟而严重影响控制系统的品质局限

并克服了传统方法通过减小系统增益来增强系统的鲁棒性

但同时降低了系统响应特性的缺点。

Abstract

A control scheme with a Modified Smith Predicator (MSP) for the position-based dynamic look-and-move visual servoing for the control of micromanipulation was proposed. The position-based dynamic look-and-move control scheme was applied to the vision servoing system with a dual-loop control scheme

in which the local controller was used as a position-controlled device

and the outer one as a vision servoing controller. The control scheme with a similar structure to the Smith predictor called modified Smith predictor was employed to eliminate the vision delay. The detailed analysis and experiments show that the vision control system with the proposed control scheme has better dynaimics performance than the vision control system with a single PID controller. The proposed control scheme resolves the problems of vision servoing’s inherent time delay induced by time consuming image acquisition transfering and processing and improves the dynamic response properties and antijamming ability of the vision servoing.

关键词

Keywords

references

. VIKRAMADITYA B, NELSON B J. Visually guided microassembly using optical microscopes and active vision techniques . IEEE International Conference Robotics and Automation. Albuquerque, USA, 1997: 3172-3177.

. FEDDEMA J T, SIMON R W. Visual servoing and CAD-driven microassembly . IEEE Robotics and Automation Magazine. 1998, 5(4): 18-24.

. FERREIRA A, CASSIER C, HIRA S. Automatic microassembly system assisted by vision servoing and virtual reality [J]. IEEE Transactions on Mechatronics. 2004, 9(2): 321-323.

. MUKUNDAKRIHNAN B, NELSON B J. Micropart feature design for visually servoed microassembly . IEEE International Conference Robotics and Automation. San Francisco, USA, 2000: 965-970.

. NICKELS K, HUTCHINSON S. Estimation uncertainty by SSD-based feature tracking [J]. Image and Vision Tracking. 2002, 20: 47-58.

. RALIS S J, VIKRAMADITYA B, NELSON B J. Micropositioning of a weakly calibrated microassembly system using coarse-to-fine visual servoing strategies [J]. IEEE Transactions on Electronics Packing Manufacturing. 2000, 23(2): 123-131.

. VINCZE M. Dynamics and system performance of visual servoing . IEEE International Conference Robotics and Automation. San Francisco, USA, 2000: 644-649.

. LIU Y, HOOVER A W, WALKER I D. A timing model for vision-based control of industrial robot manipulators [J]. IEEE Transaction on Robotics, 20(5): 891-898.

. 方康玲. 过程控制系统[M]. 武汉: 武汉理工大学出版社, 2002: 171-175. FANG K L. Process control system [M]. Wuhan: Wuhan University of Science and Technology Press, 2002: 171-175. (in Chinese)

. HAGGLUND T. A predictive PI controller for process with long dead times [J]. IEEE Control Systems Magazine, 1992,12(1):57-60.

. STOJIC M R, MATIJEVIC M S, DRAGANOVIC L S. A robust smith predictor modified by internal models for integrating process with dead time [J]. IEEE Transactions on Automatic Control, 2001, 46(8): 1293-1298.

. 陈维山,赵杰. 机电系统计算机控制[M]. 哈尔滨:哈尔滨工业大学出版社,1999. CHEN W S, ZHAO J. Computer control of mechanical and electronical system . Harbin: Harbin Institute of Technology Press, 1999: 40-66. (in Chinese)

浏览量

1031

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

MEMS摩阻传感器微组装系统研制

具有力感知功能的四臂式MEMS微夹持器研制

复合式MEMS微夹持器研制

压电陶瓷驱动球基微驱动器的动力学研究

生物显微切割微操作仪的设计与研制