
浏览全部资源
扫码关注微信
1. 北京控制工程研究所
2. 北京航空航天大学 仪器科学与光电工程学院 北京,100191
收稿日期:2005-10-14,
修回日期:2006-05-16,
纸质出版日期:2006
移动端阅览
韩邦成, 虎刚, 房建成. 磁悬浮控制力矩陀螺高速转子的优化设计[J]. 光学精密工程, 2006,14(4): 662-666
HAN Bang-cheng, HU Gang, FANG Jian-cheng. Optimization design of magnetic suspended gyroscope rotor[J]. Editorial Office of Optics and Precision Engineering, 2006,14(4): 662-666
介绍了一种磁悬浮控制力矩陀螺(CMG)的结构
其中陀螺转子的额定角动量为200 Nms。利用多学科设计优化软件iSIGHT及有限元分析软件ANSYS
以质量为优化目标
以静力学、动力学和其他要求同时作为约束条件
对永磁偏置混合磁轴承支承的5自由度高速盘形转子(额定转速为20 000 rpm)进行了优化设计。通过优化设计
其静强度安全系数由原来的2.39提高到2.63
提高了10%;转子质量由15.032 kg减小为13.972 kg
减少了7.1%。为满足控制系统对共振频率的要求
转子的弹性一阶共振频率为1 313 Hz(动力学)。
The structure of a Control Momentum Gyroscope(CMG) was introducecl
in which gyroscope rotor with the rating rotation speed of 20
000 r/min and rating angular momentum of 200 Nms is supported by permanent bias active magnetic bearing. The software of multidisciplinary design optimization (iSIGHT) and the software of Finite Element Analysis Software (ANSYS) were applied to optimize the rotor to reduce the mass of rotor. The results of optimization indicate that the mass of the rotor is decreased from 15.032 kg to 13.973 kg (is reduced by 7.1%)
the safety factor is increased from 2.39 to 2.63 (is increased by 10%)
the first resonance frequency is 1 313 Hz compare to original design results.
FAN Y H,FANG J CH. Experimental research on the nutational stability of magnetically suspended momentum wheel in control moment gyroscope(CMG)[J]. Ninth International Symposium Magnetic Bearings, August,2004, USA.116-121.[2] The Proceedings of the committee to investigate the SKYLAB CMG No.2 orbital anomalies . Guidance and Control Division Astrionics Laboratory. NASA, N79-76857, Jan. 18, 1974:1-9.[3] BURT R R,LOFFI R W. Failure analysis of international space station control moment gyro . The Proceeding 10th European Space Mechanisms and Tribology Symposium, San Sebastian, Spain, 24-26.September, 2003:13-25.[4] DA-CHEN P. Magnetic bearing system design for enhanced stability[M]. University of Maryland College Park. 1994:128-130.[5] 俞文伯, 栾胜, 房建成. CMG磁悬浮转子系统的模型与控制律[J]. 航空学报. 2003,24(6):541-545. YU W B, LUAN SH,FANG J CH. Model and control law of CMG active magnetic bearing rotor[J]. Chinese Journal of Aeronautics, 2003,24(6):541-545.(in Chinese)[6] 魏彤, 房建成. 磁悬浮控制力矩陀螺的动框架效应及其角速率前馈控制方法的研究[J]. 宇航学报, 2005,26(1):19-23. WEI T, FANG J CH. Moving-gimbal effects and angular rate feedforward control in magnetically suspended rotor system of CMG[J]. Journal of Astronautics, 2005,26(1):19-23.(in Chinese)[7] 陈立志. 磁悬浮轴承在高速旋转机械上的应用及一种混合径向磁悬浮轴承的设计[J]. 光学 精密工程, 1994,2(4):101-108. CH L ZH. Application of magnetic floating bearing in high speed rotary machinery and design of a mixing radial magnetic floating bearing[J]. Optic and Precision Engineering, 1994, 2(4):101-108.(in Chinese)[8] SEMYONOV Y P. The beginning of the MIR station active operation . The 38th congress of the international astronautical . October 10-17,1987/Brighon, United Kingdom:21-24.[9] ANAND D K, KIRK J A,FROMMER D A. Design consideration for a magnetically suspended flywheel energy storage system . Proceedings of 20th intersociety energy conversion engineering conference. Miami Beach, FL, August 18-23,1985.[10] HAGIWARA S. Rotational tests of magnetically suspended flywheel for spacecraft (2nd report) . JSME No. 810-4(1981).PP.97-69.[11] 韩邦成, 李也凡, 贾宏光, 等. 主动磁轴承力及其线性化参数的计算[J]. 光学 精密工程,2003, 11(4): 65-69. HAN B CH,LI Y F,JIA H G,et al. Calculation of forces and linear parameters of active magnetic bearing[J]. Optic and Precision Engineering, 2003,11(4):65-69.(in Chinese)
0
浏览量
158
下载量
26
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621