浏览全部资源
扫码关注微信
1. 长春理工大学 光电工程学院,吉林 长春 130022
2. 空军航空大学 基础部,吉林 长春,130022
3. 山东临沂师范学院,山东 临沂,276005
4. 吉林大学 电子科学与工程学院,吉林 长春 130012
收稿日期:2009-06-23,
修回日期:2009-10-26,
网络出版日期:2010-08-20,
纸质出版日期:2010-08-20
移动端阅览
于秋水, 安志勇, 杨瑞宁, 梁 爽, 宋静怡. 轻武器光学瞄具的视差参数测试[J]. 光学精密工程, 2010,18(8): 1732-1737
YU Qiu-shui, AN Zhi-yong, YANG Rui-ning, LIANG Shuang, SONG Jing-yi. Test of parallax parameters for optoelectronic sights in small arms[J]. 光学精密工程, 2010,18(8): 1732-1737
于秋水, 安志勇, 杨瑞宁, 梁 爽, 宋静怡. 轻武器光学瞄具的视差参数测试[J]. 光学精密工程, 2010,18(8): 1732-1737 DOI: 10.3788/OPE.20101808.1732.
YU Qiu-shui, AN Zhi-yong, YANG Rui-ning, LIANG Shuang, SONG Jing-yi. Test of parallax parameters for optoelectronic sights in small arms[J]. 光学精密工程, 2010,18(8): 1732-1737 DOI: 10.3788/OPE.20101808.1732.
在对传统的视差测量方法进行充分研究的基础上
提出了基于自动调焦技术的轻武器光学瞄具的视差参数测试方法。介绍了自动调焦技术的工作原理及其系统组成框图;根据轻武器瞄具性能指标的具体要求
结合自动调焦技术设计了一套轻武器瞄具的视差参数测试系统
并介绍了被测瞄具放入该测试系统前后的自动调焦过程;最终通过求取视度之差得到视差。根据轻武器瞄具光学系统的实际测试要求进行了5次测试实验
并对这5次实验数据进行了分析。结果表明:视差测试精度为0.029 6 m
-1
达到了轻武器光学瞄具技术指标<0.1 m
-1
的要求
保证了测量精度。
According to the research of traditional parallax measuring techniques
a parameter test method based on the auto-focus technology was proposed
and the principle of auto-focus and its composition block diagram were introduced. Then
in consideration of the specific requirements of small arms for sight performance
a parallax test system was designed combined with the auto-focus technology and the auto-focus processes before or after the measuring sight placed in the test system were described in detail. Furthermore
the parallax parameters were obtained according to the difference of diopter. Five experiments were performed on the requirements of the actual optical system
and the obtained parallax parameters were analyzed. Results show that the measurement accuracy of parallax parameters is 0.029 6 m
-1
which achieves the technical specification less than 0.1 m
-1
and guarantees the measuring accuracy.
程守澄.光学仪器检校[M]. 北京:兵器工业出版社,1992.
CHENG SH CH.Optical Instrument Calibration[M].beijing:Weapon Industry Press,1992.(in Chinese)
YANG M Y,KWON Oh-dal.Crater wear measurement using computer vision and automatic focusing[J]. Journal of Materials Processing Technology ,1996,58(4):362-367.
李惠民. 关于测量仪器的自动聚焦[J]. 北京测绘,1998,3:36-38.
LI HM.The auto-focus on measuring instruments[J].Beijing Surveying and Mapping,1998,3:36-38.(in Chinese)
段瑞玲,段惠波,李庆祥,等. 基于图像处理的微装配自动调焦系统[J]. 光学精密工程,2006,14(3):468-472.
DUAN RL,DUAN H B.LI QX, et al.. Micro-ssembly auto2focusing system based on image processing[J]. Opt. Precision Eng.,2006,14(3):468-472.(in Chinese)
刘瑞安,靳世久,吴晓荣,等. 视线跟踪系统中CCD 摄像机的自适应调节[J]. 光学精密工程,2007,15(6):966-972.
LIU R A,JIN SH J,WU X R, et al.. Adaptive regulation of CCD camera in eye gaze tracking system[J]. Opt. Precision Eng.,2007,15(6):966-972.(in Chinese)
张伟,汪岳峰,董伟. 光学仪器视差自动检测研究[J]. 光学技术.2002,28(4):365-366.
ZHANG W,WANG YF,DONG W.Research on automatic parallax measurement[J].Optical Technology,2002,28(4):365-366.(in Chinese)
李刚,周冰,董伟,等. 一种视差的自动检测方法[J]. 光学仪器.2002,24(2):3-6.
LI G,ZHOU B,DONG W,et al.. Measuring parallax of the telescope system with CCD device[J].Optical Instruments,2002,24(2):3-6. (in Chinese)
王义文,刘献礼,谢晖. 基于小波变换的显微图像清晰度评价函数及3-D自动调焦技术[J]. 光学精密工程,2006,14(6):1063-1069.
WANG Y W,LIU XL,XIE H. A wavelet2based focus measure and 32D autofocusing for microscope images[J]. Opt. Precision Eng.,2006,14(6):1063-1069.(in Chinese)
MA X H, TAN Q L, ZHANG W D. Improvement to CCD capturing method for higher resolving images[J]. ISTM,2005,6(7):6430-6432.
ELAD M,FEUER A. Restoration of a single superresolution image from several blurred, noise, and undersampled measured Images[J]. IEEE Transactions on Image Processing,1997,6(12):1646-1658.
WEI L, HEE K S. Improved optimization strategies for autofocusing motion compensation in MRI via the analysis of image metric maps[J]..Magnetic Resonance Imaging,2006,24(6):751-760.
FAN K CH,CHU C L,MOU J I, Development of a low-cost autofocusing probe for profile measurement[J]. Meas. Sci. Technol,2001,12(12):2137-2146.
0
浏览量
630
下载量
3
CSCD
关联资源
相关文章
相关作者
相关机构