水平式两轴转台中库德光路的快速装调

乔 健; 高云国; 韩光宇; 赵 天

doi:10.3788/OPE.20101808.1760

您当前的位置：

首页 >

文章列表页 >

水平式两轴转台中库德光路的快速装调

现代应用光学 | 更新时间：2020-08-12

- 水平式两轴转台中库德光路的快速装调
- Fast alignment of Coude optical system in alt-alt two axis tracking turntable
- 光学精密工程 2010年18卷第8期页码：1760-1765
- 作者机构：
  
  1. 中国科学院长春光学精密机械与物理研究所, 吉林长春 130033
  2. 中国农业大学信息与电气工程学院北京,130083
- 作者简介：
- 基金信息：
  
  中国科学院长春光学精密机械与物理研究所三期创新工程资助项目(No.057X22C050)()
- DOI：10.3788/OPE.20101808.1760
  中图分类号： TH741.14;TN206
- 收稿日期：2010-04-15，
  
  修回日期：2010-05-10，
  
  网络出版日期：2010-08-20，
  
  纸质出版日期：2010-08-20
- 稿件说明：
移动端阅览
乔健, 高云国, 韩光宇, 赵天. 水平式两轴转台中库德光路的快速装调[J]. 光学精密工程, 2010,18(8): 1760-1765

QIAO Jian, GAO Yun-guo, HAN Guang-yu, ZHAO Tian. Fast alignment of Coude optical system in alt-alt two axis tracking turntable[J]. 光学精密工程, 2010,18(8): 1760-1765
乔健, 高云国, 韩光宇, 赵天. 水平式两轴转台中库德光路的快速装调[J]. 光学精密工程, 2010,18(8): 1760-1765 DOI： 10.3788/OPE.20101808.1760.

QIAO Jian, GAO Yun-guo, HAN Guang-yu, ZHAO Tian. Fast alignment of Coude optical system in alt-alt two axis tracking turntable[J]. 光学精密工程, 2010,18(8): 1760-1765 DOI： 10.3788/OPE.20101808.1760.

摘要

为实现对水平式两轴转台中库德光路的快速高精度装调

建立了自准直平行光管与平面反射镜相组合的自准直装调和检测系统。介绍了水平式两轴转台中库德光路的组成和工作原理

根据光学自准直原理给出了库德光路的装调和检测方法;结合库德光路的特点推导出基于坐标变换的库德镜辅助装调模型

进而实现了库德光路的快速装调。最后

对装调好的库德光路进行了随经轴和纬轴转动的误差检测

得出两轴转台工作过程中库德光路的实际晃动误差。结果表明

通过装调的库德光路晃动误差仅为5.2

满足设计指标要求的8。该装调技术不仅适用于库德光路也可对其它的反射镜装调提供一定的借鉴和参考。

Abstract

In order to realize the fast and high accuracy alignment of Coude optical system in an alt-alt two axis tracking turntable

an auto-collimation alignment and testing system was built

which was composed of an auto-collimator with a flat reflector. The working principle and components of Coude optical system in the turntable were introduced

and its alignment and testing methods were proposed according to the principle of optical autocollimating. On the basis of the characteristics of Coude system

the principle of rectangular coordinate transformation was deduced and the fast alignment of Coude optical system was achieved with computer-aided alignment.The errors in Coude optical system with latitude and longitude axes rotated were measured. The results show that the wobble errors of Coude optical system aligned by this methods is 5.2

which is superior to the system precision expected by laser launching system in 8

and meets the requirements of technology index. This methods can be widely used in the alignment of Coude optical system with the two axes rotated

and has broad application prospects in practical engineering.

关键词

Keywords

references

STEFAN, RODRIGO A, PHILIPPE D, et al..VLT astronomical site monitor: control, automation, and data flow[J]. SPIE, 2000,4009:338-349.

韩雪冰, 张景旭, 王志,等. 水平式光电望远镜照准差检测方法[J]. 光电工程, 2009,36(6):63-67.

HAN B X, ZHANG J X, WANG Z, et al.. Research of alt-alt photoelectric telescope sighting error measurement [J]. Opto-Electronic Engineering, 2009,36(6):63-67. (in Chinese)

BILLMAN K W, BREAKWELL J A, DUTTA K, et al.. ABL beam control laboratory demonstrator[J]. SPIE, 1999,3706:172- 179.

BILLMAN K W, HORWITZ B A. Airborne laser system common path/common mode design approach[J]. SPIE, 1999,3706:196-203.

刘万里,曲兴华,欧阳健飞,等. 激光跟踪测量系统角度自动校正装置设计[J]. 光学精密工程, 2008,16(9):1695-1700.

LIU W L, QU X H, OUYANG J F, et al.. Design of angular automatic calibration mechanism for laser tracker system[J]. Opt. Precision Eng., 2008,16(9):1695-1700. (in Chinese)

闫勇刚, 欧阳健飞, 夏飞. 激光制导测量机器人及几何误差分析[J]. 光学精密工程,2008,16(5):907-911.

YAN Y G, OUYANG J F, XIA F. Laser guiding measurement robot and its geometric error analysis[J]. Opt. Precision Eng., 2008,16(5):907-911. (in Chinese)

史亚莉, 高云国, 张磊,等. 提高CCD激光自准直测角精度的硬件方法[J]. 光学精密工程,2008,16(4):726-732.

SHI Y L, GAO Y G, ZHANG L, et al.. Improvement of measuring accuracy of CCD laser autocollimator by changing hardware parameters[J]. Opt. Precision Eng., 2008,16(4):726-732. (in Chinese)

HIGGS J C. Overview of the ABL-firepond active-tracking and compensation facility[J].SPIE,1998,3381:14-18.

史亚莉, 高云国, 邓伟杰. 高能激光发射系统光束监测与装调的新方法[J]. 光电工程, 2008,35(2):29-33.

SHI Y L, GAO Y G, DENG W J. Novel method of beam monitoring and alignment for high-energy laser launching system[J]. Opto-Electronic Engineering, 2008, 35(2):29-33. (in Chinese)

王家骐. 光学仪器总体设计[M]. 长春:长春光学精密机械与物理研究所青年职工培训班教材,2008.

WANG J Q. Optical Instrument Collectivity Design [M]. Changchun: Teaching Material of Young Employee of Changchun Institute of Optics, Fine Mechanics and Physics, 2008. (in chinese)

金光,王家骐,倪伟. 利用坐标变换推导经纬仪三轴误差[J]. 光学精密工程,1999,7(5): 89-94.

JIN G, WANG J Q, NI W. Deduction of errors of three axis of theodolites using coordinate transformation [J]. Opt. Precision Eng., 1999,7(5):89-94. (in Chinese)

浏览量

986

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

暂无数据