微纳米级裂纹的非线性超声检测

敦怡; 师小红; 王广龙; 周兆英

doi:10.3788/OPE.20111901.0132

您当前的位置：

首页 >

文章列表页 >

微纳米级裂纹的非线性超声检测

微纳技术与精密机械 | 更新时间：2020-08-12

- 微纳米级裂纹的非线性超声检测
- Nonlinear ultrasonic test of micro-nano crack
- 光学精密工程 2011年19卷第1期页码：132-137
- 作者机构：
  
  1. 军械工程学院,河北石家庄 050003
  2. 清华大学精密仪器与机械学系北京,100084
- 作者简介：
- 基金信息：
  
  国家自然科学基金资助项目(No.50805145)()
- DOI：10.3788/OPE.20111901.0132
  中图分类号： TB553;TG115
- 收稿日期：2010-03-26，
  
  修回日期：2010-05-28，
  
  网络出版日期：2011-01-22，
  
  纸质出版日期：2011-01-22
- 稿件说明：
移动端阅览
敦怡, 师小红, 王广龙, 周兆英. 微纳米级裂纹的非线性超声检测[J]. 光学精密工程, 2010,19(1): 132-137

DUN Yi, SHI Xiao-hong, WANG Guang-long, ZHOU Zhao-ying. Nonlinear ultrasonic test of micro-nano crack[J]. Editorial Office of Optics and Precision Engineering, 2010,19(1): 132-137
敦怡, 师小红, 王广龙, 周兆英. 微纳米级裂纹的非线性超声检测[J]. 光学精密工程, 2010,19(1): 132-137 DOI： 10.3788/OPE.20111901.0132.

DUN Yi, SHI Xiao-hong, WANG Guang-long, ZHOU Zhao-ying. Nonlinear ultrasonic test of micro-nano crack[J]. Editorial Office of Optics and Precision Engineering, 2010,19(1): 132-137 DOI： 10.3788/OPE.20111901.0132.

摘要

为了实现对金属材料中微纳米级裂纹的超声检测

建立了非线性超声检测系统

研究了超声波与金属材料中裂纹的相互作用以及超声波的畸变效应。介绍了固体中普遍存在的超声非线性现象;以金属材料中的微纳米级裂纹为例研究了裂纹与超声波相互作用产生的畸变效应;在分析超声波产生畸变的基础上

描述了超声高次谐波振幅的测量方法。最后

以金属材料疲劳裂纹为例

利用常规超声检测和非线性超声检测两种方法

证明了非线性超声检测在微纳米级裂纹检测中的有效性。实验结果表明:疲劳裂纹扩展长度与二次谐波激发效率关系密切;利用二次谐波

非线性超声检测方法检测出的裂纹长度比常规超声检测方法检测出的裂纹长度增加了30%

实现了对金属材料微纳米级裂纹的检测。

Abstract

A self-built nonlinear ultrasonic test system was established and the interaction between ultrasonic waves and cracks in metal materials and the distortion effects of ultrasonic waves were researched to implement the ultrasonic test of micro-nano cracks in metal materials. On the basis of the presumption that nonlinearity of ultrasonic waves in solid materials is universal

the distortion effect caused by the interaction between ultrasonic waves and the micro-nano cracks in metal materials was explored. Then

according to the analysis on the distortion effect

the measurement of ultrasonic high-order harmonic amplitude was illustrated. Finally

a regular ultrasonic test and a nonlinear ultrasonic test were conducted respectively on fatigue cracks in metal materials

which proves that the nonlinear ultrasonic test is more effective for the micro-nano crack detection. Experiments show that the length of a fatigue crack is relative closely to the exciting efficiency of the second harmonics and the length of the crack detected by the nonlinear ultrasonic method based on the second harmonics is 30% longer than that by the regular ultrasonic test

which realizes the test for micro-nano cracks in metal materials.

关键词

Keywords

references

刘慧,刘俊岩,王扬. 超声锁相热像技术检测接触界面类型缺陷[J]. 光学精密工程,2010,18(3):653-661. LIU H,LIU J Y,WANG Y.Study of detection surface microcracks on metal plane using ultrasound lock-in thermography[J].Opt. Precision Eng.,2010,18(3):653-661.(in Chinese)[2] CANTRELL J H. Substructural organization, dislocation plasticity and harmonic generation in cyclically stressed wavy slip metals[J]. R Soc Lond A, 2004,460:1-24.[3] 税国双,汪越胜,曲建民. 材料力学性能退化的超声无损检测与评价[J]. 力学进展, 2005,35(1):52-68. SHUI G SH, WANG Y SH, QU J M. Advances in nondestructive test and evaluation of material degradation using nonlinear ultrasound [J]. Advances in Mechanics, 2005,35(1):52-68. (in Chinese)[4] 陈斌.金属材料闭合裂纹和疲劳损伤的非线性超声检测技术研究 . 北京:清华大学,2006. CHEN B.Research on nonlinear ultrasonic ndt of closed cracks and fatigue damages in metallic materials . Beijing:Tsinghua University,2006.(in Chinese)[5] CANTRELL J H,YOST W T.Nonlinear ultrasonic characterization of fatigue microstructures [J].International Journal of Fatigue,2001,23:487-490.[6] KIM J Y,ARTURO B,JONG W,et al.. Hysteretic linear and nonlinear acoustic responses from pressed interfaces [J].International Journal of Solids and Structure,2006:1-17.[7] SOLODOV I Y,KROHN N,CAN G B. An example of nonclassical acoustic nonlinearity in solids[J].Ultrasonic,2002,40:621-625.[8] 师小红.基于裂纹扩展规律的金属件寿命预测研究 . 石家庄:军械工程学院,2008. SHI X H. Life predict research based on crack propagation law for the metal part . Shijiazhuang:Ordnance Engineering College,2008.(in Chinese)[9] 敦怡,徐章遂,师小红. 非线性超声在金属基复合材料结构界面粘接强度评价中的应用[J]. 中国机械工程,2008,19(19):2351-2354. DUN Y, XU ZH S, SHI X H. Nondestructive evaluation of adhesive interfaces in MMCS using nonlinear ultrasonic method [J]. China Mechanical Engineering,2008,19(19):2351-2354.(in Chinese)[10] 徐从元,姜文华. 疲劳金属材料非线性声学特性的实验研究[J]. 南京大学学报,2000,36:328-335. XU C Y, JIANG W H. Experimental investigation on acoustic nonlinearity of fatigued metals[J].Journal of Nanjing University, 2000,36:328-335.(in Chinese)

浏览量

562

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

暂无数据