扫描平面激光坐标测量系统校准方法的优化

劳达宝; 杨学友; 邾继贵; 叶声华

doi:10.3788/OPE.20111904.0870

您当前的位置：

首页 >

文章列表页 >

扫描平面激光坐标测量系统校准方法的优化

信息科学 | 更新时间：2020-08-12

- 扫描平面激光坐标测量系统校准方法的优化
- Optimization of calibration method for scanning planar laser coordinate measurement system
- 光学精密工程 2011年19卷第4期页码：870-877
- 作者机构：
  
  天津大学精密测试技术及仪器国家重点实验室天津,中国,300072
- 作者简介：
- 基金信息：
  
  国家自然科学资金重点资助项目(No.50735003)();天津市自然科学基金资助项目(No.09JCZDJC26900)();天津市科技支撑计划重点项目(No.08Z
- DOI：10.3788/OPE.20111904.0870
  中图分类号： TH72;TN247
- 收稿日期：2010-07-30，
  
  修回日期：2010-09-29，
  
  网络出版日期：2011-04-26，
  
  纸质出版日期：2011-04-26
- 稿件说明：
移动端阅览
劳达宝, 杨学友, 邾继贵, 叶声华. 扫描平面激光坐标测量系统校准方法的优化[J]. 光学精密工程, 2011,19(4): 870-877

LAO Da-bao, YANG Xue-you, ZHU Ji-gui, YE Sheng-hua. Optimization of calibration method for scanning planar laser coordinate measurement system[J]. Editorial Office of Optics and Precision Engineering, 2011,19(4): 870-877
劳达宝, 杨学友, 邾继贵, 叶声华. 扫描平面激光坐标测量系统校准方法的优化[J]. 光学精密工程, 2011,19(4): 870-877 DOI： 10.3788/OPE.20111904.0870.

LAO Da-bao, YANG Xue-you, ZHU Ji-gui, YE Sheng-hua. Optimization of calibration method for scanning planar laser coordinate measurement system[J]. Editorial Office of Optics and Precision Engineering, 2011,19(4): 870-877 DOI： 10.3788/OPE.20111904.0870.

摘要

介绍了一种基于旋转平面激光单站测角、多站交汇的坐标测量系统

并对其校准方法进行了优化。分析了系统的测角方式和多传感器交汇测量的特点

阐述了基于传统方法的单基站方位信息测量原理及系统结构

并提出了相应的单站结构参数和系统参数校准方法。针对转轴直线和光平面的特点

设计了配套附件并借助经纬仪标定了结构参数

同时通过接收器确定光平面初始位置来实现多站系统校准。为进一步完善校准技术

分析了影响校准精度的主要误差因素

基于此分别对结构参数标定方式和系统校准过程的控制加以改进

研究了一种系统一体化标定方法。实验显示

系统整体测量误差达到0.1 mm

证明了提出的校准方法切实可行

提高了校准精度。

Abstract

On the basis of angle measurement by a rotating planar laser in the single station and intersection in the multi-station

a coordinate measuring system was introduced

and its calibration method was optimized. With analyzing its features of special angle measurement and multi-sensor intersection measurement

the principle of azimuth information measurement by the single station and the system structure were described

then the calibration methods for structure parameters of single station and system parameters were studied. According to the characteristics of a rotating shaft and a laser plane

structure parameters were calibrated by theodolites through designed corresponding accessories

and the system calibration was realized by determining the laser planes in the initial place by using a receiver. In order to perfect the calibration technology

the main error factors affecting the calibration accuracy were analyzed

the calibration methods of structure parameters and the process of system calibration were modified.An integrative calibration method for the system was proposed. Experiments show that the measuring accuracy of the system has reached 0.1 mm

which proves the calibration method is feasible

and can improve the calibration accuracy.

关键词

Keywords

references

李广云. 非正交系标测量系统原理及进展[J]. 测绘信息与工程,2003,28(2):4-10. LI G Y. Principle and developing trend of non- orthogonal coordinate systems [J]. Journal of Geomatics, 2003,28(1):4-10.(in Chinese)[2] 张国雄. 坐标测量技术发展方向[J]. 红外与激光工程,2008,37(增): 1-5. ZHANG G X. Development orientations of coordinate measuring techniques [J]. Infrared and Laser Engineering, 2008,37(supp.):1-5. (in Chinese)[3] 赵立荣,柳玉晗,朱玮,等. 光电经纬仪单站空间余弦及多站面面交汇的飞机姿态测量[J]. 光学精密工程,2009,17(11): 2786-2793. ZHAO L R, LIU Y H, ZHU W, et al.. Measurement of aircraft attitude by spatial cosine relationship in single-station and planes to intersection in multi-station of electro-optical theodolite [J]. Opt. Precision Eng., 2009,17(11): 2786-2793. (in Chinese)[4] 王晋疆,金素坤,邸旭,等. 经纬仪测量系统在工业测量中的应用[J]. 光电工程,2003,30(1):53-55. WANG J J,JIN S K,DI X, et al.. Application of theodolite Measuring system in industrial measurement [J]. Opti-Electronic Engineering, 2003,30(1):53-55.(in Chinese)[5] 刘立欣,刘亦菲,张永刚. 条带式弹道像机交汇测量系统[J]. 仪器仪表学报,2004,25(增):234-235. LIU L X,LIU Y F,ZHANG Y G. Intersection measuring system of trajectory camera with long narrow photosensitive surface [J]. Chinese Journal of Scientific Instrument, 2004,25(supp.):234-235.(in Chinese)[6] 周富强,张广军,江洁,等. 现场双经纬仪三维坐标测量系统[J]. 机械工程学报,2004,40(1):165-169. ZHOU F Q,ZHANG G J,JIANG J, et al.. Three-dimensional coordinate measuring system with bino-theodolites on site [J]. Chinese Journal of Mechanical Engineering, 2004,40(1):165-169.(in Chinese)[7] 陈刚,陈华,车仁生. 空间点的立体视觉传感器标定方法[J]. 光学精密工程,2007,15(9):1439-1444. CHEN G,CHEN H,CHE R SH. Calibration method for stereo vision sensor based on spatial points [J]. Opt. Precision Eng., 2007,15(9):1439-1444.(in Chinese)[8] 孙军华,吴子彦,刘谦哲,等. 大视场双目视觉传感器的现场标定[J]. 光学精密工程,2009,17(3):633-640. SUN J H, WU Z Y, LIU Q ZH, et al.. Field calibration of stereo vision sensor with large FOV [J]. Opt. Precision Eng., 2009,17(3):633-640.(in Chinese)[9] 张滋黎,邾继贵,周虎,等. 一种新型自动结果经纬仪引导跟踪方法[J]. 光电工程,2010,37(4):1-7. ZHANG Z L,ZHU J G,ZHOU H, et al.. Guidance tracking method of a new automatic Laser theodolite system [J]. Opti-Electronic Engineering, 2010,37(4):1-7.(in Chinese)[10] 黄桂平,李广云. 电子经纬仪工业测量系统定向及坐标解算算法研究[J]. 测绘学报,2003,32(3):256-260. HUANG G P,LI G Y. Study of system orientation and coordinate calculation IMS [J]. Acta Geodaetica et Cartographica Sinica, 2003,32(3):256-260. (in Chinese)

浏览量

691

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

新型旋转激光扫描系统轴系调整与误差标定

基于惯性基准的大尺寸空间角测量

光学曲面的偏折测量技术：原理、挑战与展望（特邀）

场景切换感知的地基成像系统电子稳像技术

基于光谱共焦探针的Wolter-I型X射线显微镜芯轴高精度检测