大口径大曲率半径光学元件的高精度检测

杨李茗; 叶海仙

doi:10.3788/OPE.20111906.1207

您当前的位置：

首页 >

文章列表页 >

大口径大曲率半径光学元件的高精度检测

现代应用光学 | 更新时间：2020-08-12

- 大口径大曲率半径光学元件的高精度检测
- High-precision metrology for optical components with large-apertures and large radii of curvature
- 光学精密工程 2011年19卷第6期页码：1207-1212
- 作者机构：
  
  成都精密光学工程研究中心,四川成都,610041
- 作者简介：
- 基金信息：
  
  国家科技重大专项课题支持项目()
- DOI：10.3788/OPE.20111906.1207
  中图分类号： TH74
- 收稿日期：2010-09-13，
  
  修回日期：2010-10-27，
  
  网络出版日期：2011-06-25，
  
  纸质出版日期：2011-06-25
- 稿件说明：
移动端阅览
杨李茗, 叶海仙. 大口径大曲率半径光学元件的高精度检测[J]. 光学精密工程, 2011,19(6): 1207-1212

YANG Li-ming, YE Hai-xian. High-precision metrology for optical components with large-apertures and large radii of curvature[J]. Editorial Office of Optics and Precision Engineering, 2011,19(6): 1207-1212
杨李茗, 叶海仙. 大口径大曲率半径光学元件的高精度检测[J]. 光学精密工程, 2011,19(6): 1207-1212 DOI： 10.3788/OPE.20111906.1207.

YANG Li-ming, YE Hai-xian. High-precision metrology for optical components with large-apertures and large radii of curvature[J]. Editorial Office of Optics and Precision Engineering, 2011,19(6): 1207-1212 DOI： 10.3788/OPE.20111906.1207.

摘要

针对目前已有的光学检测设备无法实现大口径大曲率半径光学元件高精度检测的问题

提出利用长程轮廓仪(LTP)来进行大口径大曲率半径(正、负)光学元件的精确测量

并通过实验证明了LTP检测大曲率半径光学元件的优势。分析计算了LTP测量曲率半径的算法精度

设计了合理的机械结构进行旋转测量

得到了全口径的曲率半径分布。最后与球径仪、刀口仪的测量结果进行了对比。对

=37.108 m和

=41.065 m的球面镜测量结果显示

LTP的测量重复性在0.05%以内

与球径仪、刀口仪的测量值相差均在0.05%以内。研究结果表明

LTP可以用来解决目前几十米的大

曲率半径光学元件难以高精度测量的难题。

Abstract

For lack of proper metrologic instruments to measure optical components with large-apertures and large radii of curvature

this paper investigates the feasibility to measure large radius of curvature (positive

negative) by using a Long Trace Profiler(LTP). The experiments are carried out to verify its advantages. The algorithmic precision of radius of curvature tested with the LTP is calculated

then the radius of curvature of full-aperture is figured out by a rotational measurement in a proper mechanical stage.Finally

obtained tested results are compared with those of a spherometer and a knife-edge tester. For the spherical surface with

=37.108 m and

=41.065 m

the repeatability of the LTP is in 0.05%

which means the relative discrepancy between the LTP and the spherometer or the knife-edge tester is under 0.05%. These results indicate that LTP is capable of measuring components with large radii of curvature in high-precision.

关键词

Keywords

references

杨甬英,陈坚. 一种新型的大曲率半径实时检测系统[J]. 光电工程,2001,28(3):29-33. YANG Y Y,CHEN J.A novel real-time testing system used for large curvature radius[J].Opto-Electronic Engineering, 2001,28(3):29-33.(in Chinese)[2] 钱石南. 大口径平面和非球面光学表面的纳米和纳弧度精度的测量长行程外形仪的原理应用和发展[J]. 激光与光电子学进展,2008,45(5):16-25. QIAN SH N.Nanometer and nanoradian accuracy measurement of large scale plane and asphereprinciple,applications and development of Long Trace Profiler[J].Laser & Optoelectronics Progress, 2008,45(5):16-25.(in Chinese)[3] XIAO T Q,XIA SH J.A new long trace profiler for aspheric optical surface metrology[J].SPIE,2002,4927:208-213.[4] IRICK S C,MCKINNEY W R. Advancements in one-dimensional profiling with a long trace profiler[J]. International Symposium on Optical Fabrication, Testing and Surface Evaluation,1992,1720:162-168.[5] TAKACS P Z,FURENLID K, et al..Advances in precision mirror figure metrology[J].Review of Scientific Instruments,1992,63(1,pt.11B):1409.[6] QIAN S N, LI H Z, et al.. Penta-Prism Long Trace Profiler (PPLTP) for measurement of grazing incidence space optics[J]. Multilayer and Grazing Incidence X-Ray/Euv Optics Iii,1996,2805:108-114.[7] 崔天刚,王永刚,马冬梅,等. Wolter I型反射镜面形在线检测装置设计[J]. 光学精密工程,2010,18(8):1801-1806. CUI T G,WANG T G,MA D M, et al..Design of online measuring device for surface profile of Wolter Type I mirror[J].Opt. Precision Eng., 2010,18(8):1801-1806.(in Chinese)[8] 杨君,张涛,宋靖雁,等. 星点质心亚像元定位的高精度误差补偿法[J]. 光学精密工程,2010,18(4):1002-1010. YANG J,ZHANG T,SONG J Y, et al..High accuracy error compensation algorithm for star image sub-pixel subdivision location[J]. Opt. Precision Eng., 2010,18(4):1002-1010.(in Chinese)[9] 费业泰.误差理论与数据处理[M]. 第5版. 北京:机械工业出版社,2009. FEI Y T.Error Theory and Data Processing[M].5th ed.. Beijing:Mechanics Industry press,2009.(in Chinese)[10] 林旭东,陈涛,明名,等. 球面拼接的相对曲率半径测量[J]. 光学精密工程,2010,18(1):75-82. LIN X D,CHEN T,MING M, et al..Measurement of relative curvature radius for spherical segmented mirrors[J]. Opt. Precision Eng., 2010,18(1):75-82.(in Chinese)

浏览量

280

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

暂无数据