全反射式无焦ZH系统的装调

何红星; 赵劲松; 潘顺臣

doi:10.3788/OPE.20111908.1743

您当前的位置：

首页 >

文章列表页 >

全反射式无焦ZH系统的装调

现代应用光学 | 更新时间：2020-08-12

- 全反射式无焦ZH系统的装调
- Optical alignment of all-reflective afocal ZH optical system
- 光学精密工程 2011年19卷第8期页码：1743-1749
- 作者机构：
  
  昆明物理研究所昆明,650223
- 作者简介：
- 基金信息：
  
  总装备部重点基金资助项目(No.6140527)()
- DOI：10.3788/OPE.20111908.1743
  中图分类号： TN216
- 收稿日期：2011-03-01，
  
  修回日期：2011-03-21，
  
  网络出版日期：2011-08-25，
  
  纸质出版日期：2011-08-25
- 稿件说明：
移动端阅览
何红星, 赵劲松, 潘顺臣. 全反射式无焦ZH系统的装调[J]. 光学精密工程, 2011,19(8): 1743-1749

HE Hong-xing, ZHAO Jin-song, PAN Shun-chen. Optical alignment of all-reflective afocal ZH optical system[J]. Editorial Office of Optics and Precision Engineering, 2011,19(8): 1743-1749
何红星, 赵劲松, 潘顺臣. 全反射式无焦ZH系统的装调[J]. 光学精密工程, 2011,19(8): 1743-1749 DOI： 10.3788/OPE.20111908.1743.

HE Hong-xing, ZHAO Jin-song, PAN Shun-chen. Optical alignment of all-reflective afocal ZH optical system[J]. Editorial Office of Optics and Precision Engineering, 2011,19(8): 1743-1749 DOI： 10.3788/OPE.20111908.1743.

摘要

介绍了一种新颖的共轴全反射式无焦光学系统ZH系统的装调技术。该系统由两块相对放置的抛物面反射镜和一块45放置的双面反射镜组成

其两抛物面反射镜可分别从两端安装

从而使双向平面反射镜易于装配。对ZH系统进行了误差分析和装调分析

讨论了元件位置失调带来的系统像差的变化

给出了ZH系统的误差分析结果。由于光线经过ZH系统和分束镜后

光轴在水平方向和垂直方向有平移

平移后的出射光轴与入射光轴的平行需要精确的装调技术来保证。给出了ZH系统的装调方法

采用可见光平行光管进行辅助装调

采用水平偏移补偿镜和垂直偏移补偿镜对ZH系统出射光轴的偏移量进行补偿

利用测微组件和测微目镜对装调中平晶、反射镜的调节量进行测量

实现了ZH系统出射光轴与入射光轴的同轴。装调完成后

去掉水平偏移补偿镜和垂直偏移补偿镜

实现了ZH系统光轴的空间平行。

Abstract

A co-axis and all-reflective afocal ZH optical system and its alignment method were introduced. The ZH optical system consists of a first paraboloid

a mirror with two operational faces and a 45 angle and a second paraboloid. The two paraboloids were installed from every end of the mirror

and the mirror with two operational faces was mounted easily. The tolerance and assembly of the ZH optical system were computed and analyzed

the effect of the position misadjustment of the element on the system was discussed

and the error analysis results were given. As there is an offset distance between the incidence optical axis and the shoot optical axis when the light propagates through the ZH system

a precision assembly method was proposed to ensure the parallel of the incidence optical axis and the shoot optical axis. In experiments

a visible collimator tube was used to align the ZH optical system

and the horizontal and vertical parallel offset lenses were taken to compensate the offsets. Moreover

a micro-displacement measuring module and a micrometer eyepiece were used to measure the adjusting size of the system. By the proposed method

the ZH system completes the co-axis of the incidence optical axis and the shoot optical axis. The parallel offset lenses were taken out after ZH optical was assembled

and the system can realize the space parallel of the optical axes.

关键词

Keywords

references

何红星,赵劲松,潘顺臣. 共口径中波/短波偏振红外成像光学系统[J]. 光学学报,2009, 29(4):932-936. HE H X, ZHAO J S, PAN S C. Common aperture optical system for MWIR/SWIR polarization imager[J]. Acta Optica S inica, 2009,29(4):932-936. (in Chinese)[2] 赵劲松,潘顺臣,何红星. 一种中心遮挡比最小的全反射式光学系统及其应用 . 国防专利,2007. ZHAO J S, PAN S C, HE H X. A novel all-reflective optical system with the minimal central obstacale ratio and its applications,national defence patent .2007. (in Chinese)[3] 潘君骅, 李新南. 偏轴两镜系统设计[J]. 光学学报,1994 ,14(8):867-871. PAN J H,LI X N. Design of a tilted two-mirror optical system[J]. Acta Optica S inica, 1994,14(8):867-871. (in Chinese)[4] 潘君骅. 光学非球面的设计、加工与检验[M]. 苏州:苏州大学出版社,2004:10-62. PAN J H. The design,Manufacture and Test of the Aspherical Optical Surfaces[M]. Suzhou: Suzhou University Press, 2004:10-62.(in Chinese)[5] 杨晓飞,张晓辉,韩昌元. Zemax软件在离轴三反射镜系统计算机辅助装调中的应用[J]. 光学精密工程,2004,12(3):270-274. YANG X F, ZHANG X H, HAN CH Y. Application of zemax software in alignment of three-mirror off-axis aspherical optical system[J]. Opt. Precision Eng.,2004,12(3):270-274. (in Chinese)[6] 张继超,丁亚林,张洪文. 一种四维光学仪器像面的装调方法[J]. 长春理工大学学报,2006 , 29(4):30-32. ZHANG J CH,DING Y L,ZHANG H W. A method of adjustment for four-dimensional optical system[J]. Journal of Changehun University of Science and Technology,2006,29(4):30-32. (in Chinese)[7] BURGE J H. An easy way to relate optical element motion to system pointing stability[J]. SPIE,6288:62880I-1-62880I-12 (2006).[8] 刘磊, 李景林, 吕清涛,等. 大口径反射光学系统装调装置设计研究[J]. 光学精密工程,2005,13(supp.):1191-1196. LIU L,LI J L,LV Q T, et al.. Research on adjusting device of large aperture reflective optics system [J]. Opt. Precision Eng.,2005,13(supp.):134-137. (in Chinese)[9] 乔健,高云国,韩光宇,等. 水平式两轴转台中库德光路的快速装调[J]. 光学精密工程,2010,18(8):1760-1765. QIAO J,GAO Y G,HAN G Y,et al.. Fast alignment of Coude optical system in alt-alt two axis tracking turntable[J].Opt. Precision Eng.,2010,18(8):1760-1765. (in Chinese)[10] KORSCH D. Reflective Optis[M]. New York: Academic Press, INC., 1991:152-206.

浏览量

628

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

双波段LED照明的基因测序荧光显微系统设计

多波束激光发射系统的装调

高集成度小型化共心多尺度光学系统设计

大型光学系统波前检测中气流扰动的抑制

基于LED阵列光源的太阳模拟器