离轴抛物镜检测中调整误差对波前畸变的影响

李俊峰; 宋淑梅

doi:10.3788/OPE.20111908.1763

您当前的位置：

首页 >

文章列表页 >

离轴抛物镜检测中调整误差对波前畸变的影响

现代应用光学 | 更新时间：2020-08-12

- 离轴抛物镜检测中调整误差对波前畸变的影响
- Influence of adjustment error on wavefront aberration in off-axis paraboloid test
- 光学精密工程 2011年19卷第8期页码：1763-1770
- 作者机构：
  
  中国科学院长春光学精密机械与物理研究所中国科学院光学系统先进制造技术重点实验室,吉林长春,130033
- 作者简介：
- 基金信息：
  
  中国科学院三期知识创新工程资助项目()
- DOI：10.3788/OPE.20111908.1763
  中图分类号： TH703;TQ171.6+5
- 收稿日期：2010-12-10，
  
  修回日期：2010-12-28，
  
  网络出版日期：2011-08-25，
  
  纸质出版日期：2011-08-25
- 稿件说明：
移动端阅览
李俊峰, 宋淑梅. 离轴抛物镜检测中调整误差对波前畸变的影响[J]. 光学精密工程, 2011,19(8): 1763-1770

LI Jun-feng, SONG Shu-mei. Influence of adjustment error on wavefront aberration in off-axis paraboloid test[J]. Editorial Office of Optics and Precision Engineering, 2011,19(8): 1763-1770
李俊峰, 宋淑梅. 离轴抛物镜检测中调整误差对波前畸变的影响[J]. 光学精密工程, 2011,19(8): 1763-1770 DOI： 10.3788/OPE.20111908.1763.

LI Jun-feng, SONG Shu-mei. Influence of adjustment error on wavefront aberration in off-axis paraboloid test[J]. Editorial Office of Optics and Precision Engineering, 2011,19(8): 1763-1770 DOI： 10.3788/OPE.20111908.1763.

摘要

对离轴非球面在光学加工和后期装调阶段的光学检测进行了研究

分析了检测过程中调整误差对波前畸变的影响。以加工半径为10 000 mm、二次曲面系数为-1、口径为500 mm、离轴量为425 mm的离轴抛物面为例

建立了各个调整参数对波前畸变影响的物理模型及数学模型

调整误差主要包括俯仰与高低、偏摆与离轴量及绕其子光轴旋转3组参数。应用matlab软件对调整误差对波前畸变的影响进行了仿真分析

对相应的仿真结果进行了实验验证。结果显示

仿真与实验结果一致性很好

证明了理论模型的正确性。分析得到的相应结论适用于所有离轴非球面镜的调整误差分析。

Abstract

Optical tests for the off-axis aspherics in optical processing and optical assembling were researched and the effect of adjustment errors on the wavefront aberration was analyzed. By taking an off-axis aspherics with the radiu of 10 000 mm

quadratic surface coefficient of -1

diameter of 500 mm and the lateral displacement of 425 mm for an example

the physical model and mathematical model to describe the relationship between the adjustment parameters and the wavefront aberration were estabished. The adjustment parameters included the pitch and high-low errors

beat and off-axis distance errors

and the rotating parameters around the secondary optical axis. The matlab software was used to simulate the influence of the wavefront aberration on the adjustment errors.Then

the experiments were performed to examine the simulation results.It shows that the the simulation results are well concident with the experiment ones

which proves the theory model in correct. The obtained results are also suitable for the test and alignment of other off-axis aspherics.

关键词

Keywords

references

周洋,李新南. 离轴二次曲面面型参数测量归算方法的研究[J]. 天文研究与技术,2008,5(3):307-311. ZHOU Y, LI X N.Algorithm for the measurement of the parameters of off-axis conic surface[J]. Astronomical Research & Technology, 2008,5(3):307-311. (in Chinese)[2] 杨晓飞,韩昌元. 利用计算机辅助装调检测矩形大口径离轴非球面的方法研究[J]. 光学技术,2004,30(5):532-534. YANG X F, HAN CH Y.Study on testing methods of large-aperture rectangle off-axis aspherical surface with computer aided alignment[J].Optical Technique, 2004,30(5):532-534. (in Chinese)[3] YANG H S,LEEA Y W,KIMB E D,et al.. Alignment methods for Cassegrain and RC telescope with wide-field of view[J].SPIE, 2004,5528:334-341.[4] 杨晓飞,张晓辉,韩昌元. Zemax软件在离轴三反射镜系统计算机辅助装调中的应用[J]. 光学精密工程,2004,12(3):270-274. YANG X F, ZHANG X H, HAN CH Y.Application of Zemax software in alignment of three-mirror off-axis aspherical optical system[J]. Opt. Precision Eng, 2004,2(3):270-274. (in Chinese)[5] 潘君骅.光学非球面的设计、加工与检验 [M].苏州:苏州大学出版社,2004. PAN J H.The Design, Manufacture and Test of the Aspherical Optical Surfaces[M].Suzhou:Suzhou University Press,2004. (in Chinese)[6] 戴斌飞,余景池. 中心点亮度和均方根值两种评价方法间的联系[J]. 光学仪器,2005,27(5):51-55. DAI B F, YU J CH. Relationship between Strehl ratio and root mean square for assessing optical surface[J]. Optical Instruments,2005,27(5):51-55. (in Chinese)[7] 吴冬良,戴一帆,王贵林. 光学面形误差对环围能量比的影响[J]. 光学精密工程,2007,15(9):1328-1335. WU D L, DAI Y F, WANG G L. Influence of optical surface error on encircled energy[J]. Opt. Precision Eng., 2007,15(9):1328-1335 . (in Chinese)[8] 李俊峰,宋淑梅,陈亚,等. 应用多模式组合修正大口径非球面环带误差[J]. 光学精密工程,2010,18(7):1460-1467. LI J F, SONG S M, CHEN Y, et al..Zonal error removal with multi-mode combine manufacture technique for large aspheric[J]. Opt. Precision Eng., 2010,18(7):1460-1467. (in Chinese)

浏览量

485

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

离轴非球面的计算全息图高精度检测技术

计算全息补偿检测自由曲面的高精度位姿测量

半导体双波长透射式红外干涉仪的研制及应用

大口径非球面系统的共基准加工与检验

大尺寸光学元件在位动态干涉拼接测量系统