浏览全部资源
扫码关注微信
中国科学技术大学 国家同步辐射实验室,安徽 合肥,230026
收稿日期:2011-06-03,
修回日期:2011-07-08,
网络出版日期:2011-11-25,
纸质出版日期:2011-11-25
移动端阅览
程显超, 李中亮, 赵飞云, 徐朝银. 螺旋型波荡器辐射特性及光束线前置镜热载分布[J]. 光学精密工程, 2011,19(11): 2623-2629
CHENG Xian-chao, LI Zhong-liang, ZHAO Fei-yun, XU Chao-yin. Synchrotron radiation characteristics of helical undulator and thermal distribution of premirror for beamline[J]. Editorial Office of Optics and Precision Engineering, 2011,19(11): 2623-2629
程显超, 李中亮, 赵飞云, 徐朝银. 螺旋型波荡器辐射特性及光束线前置镜热载分布[J]. 光学精密工程, 2011,19(11): 2623-2629 DOI: 10.3788/OPE.20111911.2623.
CHENG Xian-chao, LI Zhong-liang, ZHAO Fei-yun, XU Chao-yin. Synchrotron radiation characteristics of helical undulator and thermal distribution of premirror for beamline[J]. Editorial Office of Optics and Precision Engineering, 2011,19(11): 2623-2629 DOI: 10.3788/OPE.20111911.2623.
对合肥国家同步辐射实验室(NSRL)引进、装备的螺旋型电磁波荡器进行了改造和性能研究
该螺旋型电磁波荡器被插入电子储存环的直线段
来产生高通量圆偏振相干光
提供一条真空紫外光束线
用于燃烧科学研究。基于NSRL改造后的光源参数
分析其同步辐射偏振特性
计算了该波荡器辐射出的总功率和功率密度分布
以及受其直接辐照的光束线前置环面镜的热载、温度场和由此导致的光学镜面面形误差。研究结果表明
在燃烧实验要求的光子能量范围内
聚焦镜在光束照射镜面内的热变形都不超过2 m
最大面形误差约为1 rad
能满足实验要求.
A helical undulator introduced by National Synchrotron Radiation Laboratory was reformed and its performance was researched. The helical undulator was installed at the linear part of a storage ring to produce coherent synchrotron radiation with high flux and circular polarization and to provide a VUV beamline. Based on improved source parameters
the polarization radiation characteristics of the helical undulator were analyzed and the power density distribution radiated by the helical undulator
thermal distortion and the slope error on the premirror surface were calculated with ANSYS. The results show that the maximal thermal distortion of the premirror is less than 2 m in a photon energy range desired by a burning experiment and the maximal slope error is about 1 rad. Obtained results satisfy the requirement of SR experiment very well.
NABON L, CORLIER M, PEAUPARDIN P, et al.. A versatile electromagnetic planar/helical crossed undulator optimized for the SU5 low energy/high resolution beamline at Super-ACO[J]. Nucl. Instrum. Methods,1997,396:237-250.[2] SHIGERU Y, TATSURO S, SHIGEKI S, et al.. Construction of insertion devices for elliptically polarized synchrotron radiation[J].Rev. Sci. Instrum. 1989 , 60(7):1834-1837.[3] KWANG-JE K. Optical and power characteristics of synchrotron[J]. Optical Engineering,1995,34(2):342-352.[4] SUSINI J. Design parameters for hard X-ray mirrors: the european synchrotron radiation facility case [J]. Optical Engineering,1995,34(2):361-376.[5] BOLEY B A, WEINER J H. Theory of Thermal Stresses[M]. Malabar: R.E. Krieger. FL,1985.[6] 黄志刚,董晓浩,高飞,等. X射线衍射和散射光束线环面聚焦镜的面形精度与像差分析[J]. 光学 精密工程, 2004,12(1):26-30. HUANG ZH G, DONG X H, GAO F, et al.. Slope error and aberration analysis for XRDX beamline toroidal focusing mirror[J]. Opt. Precision Eng., 2004,12(1):26-30.(in Chinese)[7] 柳晖,高雪官. 同步辐射单色器冷却压弯机构[J]. 光学 精密工程, 2004, 12(6):611-612. LIU H , GAO X G. Monochromator cooling bender in synchrot ron radiation[J]. Opt. Precision Eng., 2004,12(6):611-612. (in Chinese)[8] 凤良杰,董晓浩,康乐,等. 弧矢压弯晶体的力学性能与形位误差分析[J]. 光学 精密工程, 2007,15(3):362-367. FENG L J, DONG X H, KANG L, et al.. Mechanical property of sagittal focusing crystal and effect of slope error on incidence angle[J]. Opt. Precision Eng., 2007,15(3):362-367. (in Chinese)[9] 李中亮,康乐,赵飞云,等. 大曲率弧矢弯曲复合晶体的研制[J]. 光学 精密工程, 2010, 18(9):1930-1935. LI ZH L, KANG L, ZHAO F Y, et al.. Development of the assembly crystal for sagittal bending with a large curvature[J]. Opt. Precision Eng., 2010, 18(9): 1930-1935. (in Chinese)[10] 卢启鹏,马磊,彭忠琦. 变包含角平面光栅单色器扫描转角精度的检测[J]. 光学 精密工程, 2010,18(7):1548-1553. LU Q P, MA L, PENG ZH Q. Rotation-angle-accuracy measurement of scanning mechanism in variable included angle plane grating monochromater[J]. Opt. Precision Eng., 2010, 18(7): 1548-1553. (in Chinese)
0
浏览量
347
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构