神光Ⅲ主机装置编组站稳定性设计

王美聪; 陈刚; 黄湛; 陈晓娟; 吴文凯; 王军; 朱明智

doi:10.3788/OPE.20111911.2664

您当前的位置：

首页 >

文章列表页 >

神光Ⅲ主机装置编组站稳定性设计

微纳技术与精密机械 | 更新时间：2020-08-12

- 神光Ⅲ主机装置编组站稳定性设计
- Stability design of switchyard in SGⅢ facility
- 光学精密工程 2011年19卷第11期页码：2664-2670
- 作者机构：
  
  中国工程物理研究院总体工程研究所,四川绵阳,621999
- 作者简介：
- 基金信息：
  
  国家863高技术研究发展计划资助项目(No.2007AA804217)()
- DOI：10.3788/OPE.20111911.2664
  中图分类号： TL632.1
- 收稿日期：2011-01-10，
  
  修回日期：2011-03-11，
  
  网络出版日期：2011-11-25，
  
  纸质出版日期：2011-11-25
- 稿件说明：
移动端阅览
王美聪, 陈刚, 黄湛, 陈晓娟, 吴文凯, 王军, 朱明智. 神光Ⅲ主机装置编组站稳定性设计[J]. 光学精密工程, 2011,19(11): 2664-2670

WANG Mei-cong, CHEN Gang, HUANG Zhan, CHEN Xiao-juan, WU Wen-kai, WANG Jun, ZHU Ming-zhi. Stability design of switchyard in SGⅢ facility[J]. Editorial Office of Optics and Precision Engineering, 2011,19(11): 2664-2670
王美聪, 陈刚, 黄湛, 陈晓娟, 吴文凯, 王军, 朱明智. 神光Ⅲ主机装置编组站稳定性设计[J]. 光学精密工程, 2011,19(11): 2664-2670 DOI： 10.3788/OPE.20111911.2664.

WANG Mei-cong, CHEN Gang, HUANG Zhan, CHEN Xiao-juan, WU Wen-kai, WANG Jun, ZHU Ming-zhi. Stability design of switchyard in SGⅢ facility[J]. Editorial Office of Optics and Precision Engineering, 2011,19(11): 2664-2670 DOI： 10.3788/OPE.20111911.2664.

摘要

为使神光Ⅲ主机装置的打靶精度达到30 m

本文以稳定性指标为前提设计了该装置的靶场编组站

并对编组站刚架和传输反射镜组件进行了优化。采用钢筋混凝土结构支撑编组站刚架

在编组站刚架主框架内增加斜撑

以减小并合理分布编组站刚架的质量载荷

同时对局部的横梁增加人字形斜撑。设计了反射镜架且使其基频远高于编组站刚架基频以抑制编组站反射镜在随机宽频振动激励下的角度漂移。对靶场结构有限元(FEA)模型的力学分析表明

编组站中87％的传输反射镜的角度漂移低于0.48 rad

根据靶场系统中各元件漂移对光路定位误差的影响公式进行分析

结果显示编组站反射镜角度漂移可以满足靶场各单条光路定位误差不超过12.9 m的稳定性指标

证明所设计的神光III主机装置编组站可以满足相应的稳定性要求。

Abstract

To assure the pointing accuracy in a shooting target to be better than 30 m for the Shen Guang Ⅲ(SGⅢ)facility

the switchyard of target area for the facility was designed and the rigid frame and transport mirrors in the switchyard were optimized to improve their stability. In design

the reinforced concrete was used to support the switchyard

and the tilted supports were added in the steel frame of switchyard to decrease and distribute the mass load reasonably.Furthermore

the herringbone supports were firmed to local horizontal beams. The transport mirror supports were also designed

in which their foundational frequencies were much higher than that of the swichyard. By above ways

the angle shifts of transmission mirrors in random broadband vibration can be suppressed successfully. The mechanical analysis of range structure by Finite Element Analysis(FEA) indicates that 87% of transport mirrors show their angle shifts less than 0.48 rad. According to the relation between the rotation drifts of the optics components and the positioning errors of optical path

it can be seen that the rotation drifts of the transmission mirrors could meet the stability requirements for the positioning error of each single optical path not more than 12.9 m.

关键词

Keywords

references

彭翰生, 张小民, 范滇元, 等. 高功率固体激光装置的发展与工程科学问题 [J]. 中国工程科学, 2001, 3(3): 1-8. PENG H SH, ZHANG X M, FAN D Y, et al.. Status of high-power solid-state lasers and engineering science[J]. Engineering Science, 2001, 3(3): 1-8. (in Chinese)[2] 师智全, 彭翰生, 粟敬钦. ICF驱动器定位误差估计[J]. 强激光与粒子束, 2002, 14(2): 275-278. SHI ZH Q, PENG H S, SU J Q. Beam positioning error budget in ICF driver[J]. High Power Laser and Particle Beams, 2002, 14(2): 275-278. (in Chinese)[3] TIETBOHL G L, SOMMER S C. Stability design considerations for mirror support systems in ICF lasers . Livermore: Lawrence Livermore National Laboratory, 1996.[4] FOLEY R J. Design of the target area for the national ignition facility . Livermore: Lawrence Livermore National Laboratory, 1998.[5] TRUMER D J. Stability of optical elements in the NIF target area building . Livermore: Lawrence Livermore National Laboratory, 1998.[6] SOMMER S C, BLISS E S. Beam positioning . California: Lawrence Livermore National Laboratory, 1998.[7] 傅学农, 陈晓娟, 吴文凯, 等. 大口径反射镜组件设计及稳定性研究[J]. 光学精密工程, 2008, 16(2): 179-183. FU X N, CHEN X J, WU W K, et al.. Design of large aperture mirror support and its stability[J]. Opt. Precision Eng., 2008, 16(2): 179-183. (in Chinese)[8] 乔战峰, 赵东峰, 戴亚平, 等. "神光-II"第九路终端光学系统稳定性分析[J]. 强激光与粒子束, 2006, 18(3): 419-422. QIAO ZH F, ZHAO D F, DAI Y P, et al.. Stability analysis of final optical system of additional beam in "Shenguang-II laser facility"[J]. High Power Laser and Particle Beams, 2006, 18(3): 419-422. (in Chinese)[9] 徐元利, 吴文凯, 陈学前,等. ICF装置靶场结构总体稳定性设计[J]. 强激光与粒子束, 2009, 21(10): 1485-1488. XU Y L, WU W K, CHEN X Q, et al.. Structural systemic stability design of inertial confinement fusion facility target area[J]. High Power Laser and Particle Beams, 2009, 21(10): 1485-1488. (in Chinese)[10] 陈学前, 冯加权, 徐元利. 基于有限元分析的大型固体激光器稳定性指标重分配[J]. 强激光与粒子束, 2010, 22(5): 1073-1076. CHEN X Q, FENG J Q, XU Y L. Stability reallocation of large solid state laser based on finite element analysis[J]. High Power Laser and Particle Beams, 2010, 22(5): 1073-1076. (in Chinese)[11] CRANDALL S H, MARK W D. Random Vibration in Mechanical Systems[M]. New York:Academic Press, 1963.

浏览量

420

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

考虑温度因素对带有柔性结构的静压气体轴承稳定性影响研究

高精度煤质成分快速定量分析LIBS系统研究

InGaAs光电阴极的Cs/NF₃激活

极紫外-真空紫外光学薄膜元件的研究进展

气体静压轴承相位致振气锤失稳机理与试验