浏览全部资源
扫码关注微信
中国科学院 长春光学精密机械与物理研究所,吉林 长春,中国,130033
收稿日期:2011-01-20,
修回日期:2011-02-27,
网络出版日期:2012-01-25,
纸质出版日期:2012-01-25
移动端阅览
张丽敏, 张斌, 杨飞, 明名. 主动光学系统力促动器的设计和测试[J]. 光学精密工程, 2012,20(1): 38-44
ZHANG Li-min, ZHANG Bin, YANG Fei, MING Ming. Design and test of force actuator in active optical system[J]. Editorial Office of Optics and Precision Engineering, 2012,20(1): 38-44
张丽敏, 张斌, 杨飞, 明名. 主动光学系统力促动器的设计和测试[J]. 光学精密工程, 2012,20(1): 38-44 DOI: 10.3788/OPE.20122001.0038.
ZHANG Li-min, ZHANG Bin, YANG Fei, MING Ming. Design and test of force actuator in active optical system[J]. Editorial Office of Optics and Precision Engineering, 2012,20(1): 38-44 DOI: 10.3788/OPE.20122001.0038.
设计了一套用于控制薄镜面主镜面形的力促动器
并进行了实验测试。分析了常用的可以实现高精度、高稳定性的力促动器结构形式;结合实际情况和目前薄镜面主动光学实验系统的要求
设计了由步进电机驱动谐波减速器、精密丝杠传动
S型Loadcell反馈输出力变化的力促动器结构。最后
通过开环和闭环实验对结构进行了测试。实验结果表明
该力促动器行程为0~10 mm
输出力为100 ~100 N
精度优于0.05 N
满足大行程、高精度微量输出和高稳定性要求
可以应用于主动光学支撑系统
同时也适用于其他精密调整结构。
A set of force actuator was designed and tested for the active support system with a thin primary mirror to control the mirror surface error all the time. Conventional mechanisms for the force actuator with high accuracy and fine stability in engineering applications were studied. Then
based on the requirements of actuality and implementation in the thin primary mirror experiment system
a set of force actuator was designed and calculated in detail. A stepper motor integrated with a harmonic reducer was used to actuate the mechanism and precision screw to transmit
and an S-type Loadcell was taken as the force sensor to realize the feedback of force output. Finally
the mechanism was tested to validate the design feasibility through the opened loop and closed loop controls. Experimental results indicate that travel range of the force actuator is 0-10 mm
force range is 100-100 N and the accuracy is better than 0.05 N
which satisfies the demands of the force actuator for long range
high accuracy
fine output and stability. The actuator can be used in the support system of active optics
and is also a useful mechanism to other fine-tune structures.
于洋,曹根瑞. 主动光学反射镜面型的校正能力及其优化设计 [J].北京理工大学学报,2003,23(2):229-233. YU Y, CAO G R. A study on the corrective capability and optimization of active mirrors[J].Transactions of Beijing Institute of Technology,2003, 23(2):229-233.[2] 苏定强,崔向群. 主动光学新一代大望远镜的关键技术 [J].天文学进展,1999,17(1):1-14. SU D Q, CUI X Q. Active optics- key technology of the new generation telescopes [J]. Progress in Astronomy, 1999,17(1):1-14. (in Chinese)[3] 程景全. 天文望远镜原理和设计 [M].北京:中国科学技术出版社,2002. CHENG J X. Principles of Astronomical Telescope Design [M].Beijing: Chinese Science & Technology Press, 2002. (in Chinese)[4] MASANORI L, KEIICHI K. Primary mirror support system for the SUBARU telescope[J]. SPIE, 1994,2199:762-772.[5] CONRAD N, ZOLCINSKI-COUET M C, MICHAEL K. The active primary mirror system for the SOAR telescope[J]. SPIE, 2004,5489:870-880.[6] JAMES E K, DAVID Gr .AEOS 3.67 m telescope primary mirror active control system[J]. SPIE, 1998, 3352:400-411.[7] YORKE J, Br, JON D. Improvements to the Apache Point 3.5 meter primary mirror support system. SPIE, 1998,3351:172-177.[8] 李国平,毛新利. 一种微位移促动器的设计和检测 [J].光学 精密工程,2005,13(3):332:338. LI G P, MAO X L. Design and test of a micro-displacement actuator [J]. Opt. Precision Eng., 2005, 13(3):332:338.(in Chinese)[9] 刘泽九.滚动轴承应用手册[M]. 北京:机械工业出版社,2006. LIU Z J. Application Manual of Rolling Bearing [M].Beijing: China Machine Press, 2006. (in Chinese)[10] 李宏状,林旭东,刘欣悦,等. 400 mm薄镜面主动光学实验系统 [J].光学 精密工程,2009,17(9):2077:2077-2083. LI H Z, LIN X D, LIU X Y, et al.. Experiment system of 400 mm thin-mirror active optics [J]. Opt. Precision Eng., 2009, 17(9):2077:2076-2083. (in Chinese)
0
浏览量
285
下载量
20
CSCD
关联资源
相关文章
相关作者
相关机构