辅助溶剂对PMMA微流控芯片模内键合的影响

徐征; 王继章; 杨铎; 刘冲; 王立鼎

doi:10.3788/OPE.20122002.0321

您当前的位置：

首页 >

文章列表页 >

辅助溶剂对PMMA微流控芯片模内键合的影响

微纳技术与精密机械 | 更新时间：2020-08-12

- 辅助溶剂对PMMA微流控芯片模内键合的影响
- Effect of assistant solvent on in-mold bonding of PMMA microfluidic chips
- 光学精密工程 2012年20卷第2期页码：321-328
- 作者机构：
  
  大连理工大学辽宁省微纳米技术及系统重点实验室,辽宁大连,116023
- 作者简介：
- 基金信息：
  
  国家973重点基础研究发展计划资助项目(No.2007CB714502)();国家自然科学基金资助项目(No.91023046,No.20890024)();中央高校基
- DOI：10.3788/OPE.20122002.0321
  中图分类号： TN405
- 收稿日期：2011-06-27，
  
  修回日期：2011-09-05，
  
  网络出版日期：2012-02-25，
  
  纸质出版日期：2012-02-25
- 稿件说明：
移动端阅览
徐征, 王继章, 杨铎, 刘冲, 王立鼎. 辅助溶剂对PMMA微流控芯片模内键合的影响[J]. 光学精密工程, 2012,20(2): 321-328

XU Zheng, WANG Ji-zhang, YANG Duo, LIU Chong, WANG Li-ding. Effect of assistant solvent on in-mold bonding of PMMA microfluidic chips[J]. Editorial Office of Optics and Precision Engineering, 2012,20(2): 321-328
徐征, 王继章, 杨铎, 刘冲, 王立鼎. 辅助溶剂对PMMA微流控芯片模内键合的影响[J]. 光学精密工程, 2012,20(2): 321-328 DOI： 10.3788/OPE.20122002.0321.

XU Zheng, WANG Ji-zhang, YANG Duo, LIU Chong, WANG Li-ding. Effect of assistant solvent on in-mold bonding of PMMA microfluidic chips[J]. Editorial Office of Optics and Precision Engineering, 2012,20(2): 321-328 DOI： 10.3788/OPE.20122002.0321.

摘要

为了提高聚合物微流控芯片的键合效率

以聚甲基丙烯酸甲酯(PMMA)微流控芯片为对象

以微型注塑机为平台

研究了聚合物模内键合方法。利用注塑机提供的合模力作为键合力

利用模温机提供键合温度

选择异丙醇作为辅助溶剂

借助溶剂溶解特性来降低模内键合中的键合温度和压力。在30~70 ℃

用测量显微镜和台阶仪测试分析了不同键合温度条件下

辅助溶剂对芯片的表面形貌和微通道结构的影响;利用辅助溶剂进行模内键合实验

用电子万能实验机测试了芯片的键合强度

对模内键合工艺参数进行了优化。结果表明:异丙醇对键合质量的影响与键合温度、键合时间有关

在较高温度下会使芯片产生皲裂、微沟槽变形和堵塞;在键合温度为35 ℃

键合时间为5 min时

芯片的表面质量和微沟槽形貌较完整

键合强度不小于2.64 MPa。

Abstract

To improve the bonding efficiency of microfluidic chips

an in-mold bonding method is researched by taking a Polymethyl Methacrylate(PMMA) microfluidic chip as an research object and a micro injection machine as a working platform. Clamping forces and bonding temperatures are provided by the micro injection machine and a mold temperature machine. Isopropanol is selected as assistant solvent to reduce the bonding temperature and bonding pressure with its solubility. At 30 ℃ to 70 ℃

a microscope and a step profiler are used to analyze the influence of assistant solvent on surface morphologies and micro channel structures of chips at different temperatures. An in-mold bonding experiment is operated with the assistant solvent

then the electric universal testing machine is utilized to measure the bonding strength and to optimize the process parameters. Experimental results illustrate that the influence of isopropanol on bonding quality is related with the bonding temperature and bonding period. The surfaces of chips chap and the micro grooves become deformed or block at higher temperatures. The surface quality and morphologies of micro grooves are correspondingly improved when the bonding temperature is 35 ℃

the bonding time is 5 min

and the bonding strength is no less than 2.64 MPa.

关键词

Keywords

references

林炳成, 秦建华. 图解微流控芯片实验室[M]. 北京:科学出版社,2008. LIN B CH, QIN J H. Graphic Laboratory on a Microfluidic Chip[M]. Beijing: Science Press,2008.(in Chinese)[2] SUN Y, KWOK Y C, NGUYEN N T. Low-pressure, high-temperature thermal bonding of polymeric microfluidic devices and their applications for electrophoretic separation[J]. J. Micromech. Microeng, 2006(16):1681-1688.[3] ZHANG Z B, WANG X D, LUO Y, et al.. Thermal assisted ultrasonic bonding method for poly(methyl methacrylate) (PMMA) microfluidic devices[J]. Talanta, 2010,81(4-5):1331-1338.[4] 罗怡, 张苗苗,孙屹博,等. 面向聚合物微器件超声波精密封接的阵列波导能结构[J]. 光学精密工程,2011,19(4):754-761. LUO Y, ZHANG M M, SUN Y B, et al.. Micro energy director array for ultrasonic precise sealing of polymer MEMS device [J]. Opt. Precision Eng., 2011,19(4):754-761.(in Chinese)[5] NG S H, THEODORE R, WANG Z F. Formation of embedded microchannels by a solvent displacement bonding technique . Proceedings of 9th Electronics Packaging Technology Conference, India: IEEE,2007:211-214.[6] NIRANJAN P, ALBERTO C B, MARCO S. Solvent effects on the thermal and mechanical properties of poly(methyl methacrylate) casted from concentrated solutions[J]. Advances in Polymer Technology, 2011,12(20):12-20.[7] 赖建军,陈西曲,周宏,等. 应用于微系统封装的激光局部加热键合技术[J]. 微纳电子技术,2003,(7/8): 257-260. LAI J J, CHEN X Q, ZHOU H, et al.. Laser locally heating and bonding for micro system packaging[J]. Micronanoelectronic Technology, 2003,(7/8):257-260. (in Chinese)[8] USSING T, PETERSEN L V, NIELSEN C B, et al.. Micro laser welding of polymer microstructures using low power laser diodes[J]. Int J. Adv. Manuf. Technol., 2007,33(1-2):198-205.[9] SUZUKI Y, YAMADA M,SEKI M. Sol-gel based fabrication of hybrid microfluidic devices composed of PDMS and thermoplastic substrates[J]. Sensors and Actuators B, 2010,148(1):323-329.[10] UMBRECHT F,M LLER D, GATTIKER F, et al.. Solvent assisted bonding of polymethylmethacrylate: characterization using the response surface methodology[J]. Sensors and Actuators B, 2009,156(1):121-128.[11] LIN C H,CHAO C H,LAN CH W. Low azeotropic solvent for bonding of PMMA microfluidic devices[J]. Sensors and Actuators B, 2007,121(2):698-705.[12] SHAH J J, GEIST J, LOCASCIO L E, et al.. Capillarity induced solvent-actuated bonding of polymeric microfluidic devices[J]. Anal. Chem., 2006,78(10):3348-3353. [13] 蒋炳炎,刘瑶,李代兵,等. PMMA微流控芯片高效键合工艺研究[J]. 塑料工业,2010,38(4):33-36. JIANG B Y, LIU Y, LI D B, et al.. Research on efficient bonding procedure of PMMA microfluidic chip[J]. China Plastics Industry, 2010,38(4):33-36. (in Chinese)[14] 蓝才红,蒋炳炎,刘瑶,等. 聚合物微流控芯片键合微通道变形仿真研究[J]. 塑料工业,2009,37(5):31-34. LAN C H, JIANG B Y, LIU Y, et al.. Simulation study of microchannel distortion of polymeric microfluidic chip with bonding technique[J]. China Plastics Industry, 2009,37(5):31-34. (in Chinese)[15] 严志云,石虹桥,梁世强,等. 聚合物复合材料界面粘合理论研究进展[J]. 仲恺农业技术学院学报,2007,20(2):62-65. YAN ZH Y, SHI H Q, LIANG SH Q, et al.. Progress of study on the interfacial adhesion of polymer composites[J]. Journal of Zhongkai University of Agriculture and Technology, 2007,20(2):62-65. (in Chinese)[16] 周瑞明. 粘接机理的扩散理论与溶解度参数[J]. 温州师范学院学报,1994,(3):60-64. ZHOU R M. Diffusion theory of adhesion mechanism and the solubility parameters[J]. Journal of Wenzhou Teachers College, 1994,(3):60-64. (in Chinese)[17] 高保娇. 溶解度参数及其应用[J]. 山西化工,1998,(2):18-19. GAO B J. Application for solubility parameters[J]. Shanxi Chemical Industry, 1998,(2):18-19. (in Chinese)[18] MAIR D A, ROLANDI M, SNAUKO M, et al.. Room-temperature bonding for plastic high-pressure microfluidic chips[J]. Anal. Chem, 2007,79(13):5097-5102.[19] SHAH J J, GEIST J, LOCASCIO L E, et al.. Capillarity induced solvent-actuated bonding of polymeric microfluidic devices[J]. Anal. Chem, 2006,78(10):3348-3353.[20] SUN X H, PEENI B A, YANG W C, et al.. Rapid prototyping of poly(methyl methacrylate) microfluidic systems using solvent imprinting and bonding[J]. Journal of Chromatography A, 2007,1162:162-166.[21] 李丽萍,杜晓光. 溶剂键合法制作聚碳酸酯微流控分析芯片[J]. 分析化学,2009,37:138. LI L P, DU X G. Solvent bonding method of polycarbonate microfluidic chips[J]. Chinese Journal of Analytical Chemistry, 2009,37:138. (in Chinese)

浏览量

309

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

集成纳米增强基底的微流控SERS芯片及其致病菌检测

微流道精密磨削技术及自驱动检测芯片实验研究

PC微流控芯片黏接筋与溶剂的协同辅助键合

微流控细胞芯片LED诱导透射式荧光检测微系统

具有三维聚焦功能的微流控芯片