多零件选区激光熔化成型效率的优化

刘杰; 杨永强; 苏旭彬; 肖冬明

doi:10.3788/OPE.20122004.0699

您当前的位置：

首页 >

文章列表页 >

多零件选区激光熔化成型效率的优化

现代应用光学 | 更新时间：2020-08-12

- 多零件选区激光熔化成型效率的优化
- Efficiency optimization of selective laser melting for multi-parts
- 光学精密工程 2012年20卷第4期页码：699-705
- 作者机构：
  
  华南理工大学机械工程学院,广东广州,510640
- 作者简介：
- 基金信息：
  
  2010年广东省教育部产学研结合重点项目(No.2010A090200072)();华南理工大学优秀博士学位论文创新基金资助项目()
- DOI：10.3788/OPE.20122004.0699
  中图分类号： TG665
- 收稿日期：2011-09-30，
  
  修回日期：2011-12-15，
  
  网络出版日期：2012-04-22，
  
  纸质出版日期：2012-04-22
- 稿件说明：
移动端阅览
刘杰, 杨永强, 苏旭彬, 肖冬明. 多零件选区激光熔化成型效率的优化[J]. 光学精密工程, 2012,(4): 699-705

LIU Jie, YANG Yong-qiang, SU Xu-bin, XIAO Dong-ming. Efficiency optimization of selective laser melting for multi-parts[J]. Editorial Office of Optics and Precision Engineering, 2012,(4): 699-705
刘杰, 杨永强, 苏旭彬, 肖冬明. 多零件选区激光熔化成型效率的优化[J]. 光学精密工程, 2012,(4): 699-705 DOI： 10.3788/OPE.20122004.0699.

LIU Jie, YANG Yong-qiang, SU Xu-bin, XIAO Dong-ming. Efficiency optimization of selective laser melting for multi-parts[J]. Editorial Office of Optics and Precision Engineering, 2012,(4): 699-705 DOI： 10.3788/OPE.20122004.0699.

摘要

对多零件选区激光熔化的成型效率进行了优化。首先

分析了多零件选区激光熔化成型过程的时间消耗

并以减少时间消耗为目标建立了3维零件在3维成型空间中的2.5维排料优化规则。然后

研究了2.5维自动排料

提出利用3维零件模型在2维平面区域的投影将2.5维排料转化为2维排料的简化方法和一种利用切片数据进行投影生成的算法。最后

为验证所述方法的有效性

以手术模板模型为例

在虚拟选区激光熔化系统VDemetal280上进行了优化实验。与优化前相比

优化后的成型次数从4次降为3次

在扫描速度为600 mm/s、切片层厚为0.035 mm、扫描间距为0.08 mm的工艺参数下

总铺粉次数从3 892次降为2 231次

预计加工时间从约91 276 s降为69 918 s

时间消耗有明显减少。

Abstract

An optimized method was proposed to improve the processing efficiency of Selective Laser Melting (SLM) for multi-parts. First

the time consuming of the SLM process was analyzed and the 2.5D nesting rules for the optimization were established to reduce the time consuming. Then

the 2.5D automatic nesting was studied. A simplified method which uses the 3D projection to convert the 2.5D nesting to the 2D nesting and an algorithm for generating the projection from slice data were presented. Finally

by taking a operation model for an example

an experiment was performed on the virtual SLM system developed with OpenGL and VC++ to simulate the motion of real system and to validate the feasibility of the method. The result shows that the processing times are reduced from 4 to 3

the recoating times are from 3 892 to 2 231 and the expected processing time has been from 91 276 s to 69 918 s at a scanning speed of 600 mm/s

slicing thickness of 0.035 mm and track space of 0.08 mm.The time consuming has been significantly reduced as compared with that before optimization.

关键词

Keywords

references

OVER C, MEINERS W, WISSENBACK K, et al.. Selective laser melting: a new approach for the direct manufacturing of metal parts and tools. 1st International Conference on Laser Assisted Net Shape Engineering, Germany: Frankfurt, 2001.[2] ABE F, OSAKADA K, SHIOMI M, et al.. The manufacturing of hard tools from metallic powders by selective laser melting [J]. Materials Processing Technology, 2001,111(1/3):210-213.[3] YADROITSEV I, BERTRAND P H, SMUROV I. Parametric analysis of the selective laser melting process [J]. Appl. Surf. Sci., 2007,253(19):8064-8069.[4] WU W H, YANG Y Q, HUANG Y L. Direct manufacturing of Cu-based alloy parts by selective laser melting [J]. Chin. Opt. Lett., 2007,5(1):37-40.[5] 王迪,杨永强,吴伟辉. 光纤激光选区激光熔化316L不锈钢工艺优化[J]. 中国激光,2009,36(12):3233-3239. WANG D, YANG Y Q, WU W H. Process optimization for 316L stainless steel by fiber laser selective melting[J]. Chinese J. Lasers, 2009, 36(12):3233-3239.(in Chinese)[6] 苏旭彬,杨永强,王迪,等. 免装配机构的选区激光熔化直接成型工艺研究[J]. 中国激光,2011,38(6):0603021. SU X B, YANG Y Q, WANG D, et al.. Study on process of non-assembly mechanisms directly fabricated by selective laser melting[J]. Chinese J. Lasers, 2011,38(6):0603021.(in Chinese)[7] 吴伟辉,杨永强,何兴容,等. 金属质个性化手术模板的全数字化快速设计及制造[J]. 光学精密工程,2010,18(5):1135-1143. WU W H, YANG Y Q, HE X R, et al.. All-digital rapid design and manufacture of metal customized surgical guide plate[J]. Opt. Precision Eng., 2010,18(5):1135-1143.(in Chinese)[8] 何兴容,杨永强,吴伟辉,等. 粉碎性骨折个体化手术模板的选区激光熔化直接成型研究[J]. 生物医学工程学杂志,2010,27(3):519-523. HE X R, YANG Y Q, WU W H, et al.. Research on direct forming of comminuted fracture surgery orienting model by selective laser melting[J]. Journal of Biomedical Engineering, 2010,27(3):519-523.(in Chinese)[9] 刘杰,杨永强,宋长辉. 基于SLM从图像直接制造金属浮雕的方法[J]. 华南理工大学学报(自然科学版),2011,39(6): 13-17. LIU J, YANG Y Q, SONG CH H. SLM-based direct manufacturing of metal bas-relief from images[J]. Journal of South China University of Technology (Natural Science Edition), 2011, 39(6):13-17.(in Chinese)[10] 张英杰. 二维计算机排料与数控自动编程. 北京:华北电力大学,2004. ZHANG Y J. Two-dimensional packing and auto-programming for NC.Beijing:North China Electric Power University, 2004.(in Chinese)[11] BADU R A, BADU N R. A generic approach for nesting of 2-D parts in 2-D sheets using genetic and heuristic algorithms [J]. Computer-aided Design, 2001,33:879-891.[12] HECKMANN R, LENGAUER T. A simulated annealing approach to the nesting problem in the textile manufacturing industry [J]. Annals of Operations Research, 1995, 57:103-133.[13] EGEBLAD J, NIELSEN B K, ODGAARD A. Fast neighborhood search for two- and three-dimensional nesting problems [J]. European Journal of Operational Research, 2007,183:1249-1266.

浏览量

394

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

镍基高温合金喷油孔的飞秒激光精密加工

铝合金表面激光沉积Al_0.8FeCoNiCrCu_x高熵合金组织与耐蚀性能

基于清洗表面形貌的AH32钢激光除锈机制研究

基于清洗表面形貌的AH32钢激光除锈机制

铝合金表面激光沉积AlCrFeCoNiCu高熵合金组织与工艺优化