基于构建最优函数提高飞机姿态测量精度

赵立荣; 朱玮; 曹永刚; 柳玉晗; 孙俊喜

doi:10.3788/OPE.20122006.1325

您当前的位置：

首页 >

文章列表页 >

基于构建最优函数提高飞机姿态测量精度

信息科学 | 更新时间：2020-08-12

- 基于构建最优函数提高飞机姿态测量精度
- Improvement of measurement precision of plane attitude by constructing optimization functions
- 光学精密工程 2012年20卷第6期页码：1325-1333
- 作者机构：
  
  1. 中国科学院长春光学精密机械与物理研究所,吉林长春,中国,130033
  2. 长春理工大学通讯与信息学院,吉林长春,130022
- 作者简介：
- 基金信息：
  
  国家863高技术研究发展计划资助项目(No.2006AA703104)()
- DOI：10.3788/OPE.20122006.1325
  中图分类号： TP391.4;V448.15
- 收稿日期：2011-12-06，
  
  修回日期：2012-02-15，
  
  网络出版日期：2012-06-10，
  
  纸质出版日期：2012-06-10
- 稿件说明：
移动端阅览
赵立荣, 朱玮, 曹永刚, 柳玉晗, 孙俊喜. 基于构建最优函数提高飞机姿态测量精度[J]. 光学精密工程, 2012,20(6): 1325-1333

ZHAO Li-rong, ZHU Wei, CAO Yong-gang, LIU Yu-han, SUN Jun-xi. Improvement of measurement precision of plane attitude by constructing optimization functions[J]. Editorial Office of Optics and Precision Engineering, 2012,20(6): 1325-1333
赵立荣, 朱玮, 曹永刚, 柳玉晗, 孙俊喜. 基于构建最优函数提高飞机姿态测量精度[J]. 光学精密工程, 2012,20(6): 1325-1333 DOI： 10.3788/OPE.20122006.1325.

ZHAO Li-rong, ZHU Wei, CAO Yong-gang, LIU Yu-han, SUN Jun-xi. Improvement of measurement precision of plane attitude by constructing optimization functions[J]. Editorial Office of Optics and Precision Engineering, 2012,20(6): 1325-1333 DOI： 10.3788/OPE.20122006.1325.

摘要

提出了基于构建最优函数来提高飞机姿态测量精度的方法。首先

利用模板匹配法获得飞机在两个测站投影的同名特征点

在发射坐标系下采用交会获得飞机同名特征点的坐标值

根据飞机在空间的特征三角形解算飞机姿态的初值。然后

建立飞机体坐标系;利用成像的共线方程

重新计算空间特征点对应的像点坐标;以重投影结果与实际像点之间的偏差最小作为优化目标函数。最后

通过迭代提高目标姿态解的精度。实验结果表明

飞机轴向成像在大于500 pixel时

姿态角测量误差小于0.1°。与中轴线法及飞机角平分线方向向量法测量精度比对

本文提出的方法采用的数学模型正确、算法合理

有效地提高了飞机姿态的测量精度。

Abstract

A method based on optimization functions was proposed to improve the attitude measurement precision of a plane . First

the same feature that the plane was projected at two measuring stations was acquired by the template matching method. The coordinate value of the same feature for the plane was obtained by intersecting at a launching coordinate

and the initial value of the plane attitude was estimated in term of the characteristic triangle of the plane in space. Then

the object coordinate of the plane was established

the image coordinate according to the feature of plane was calculated by using a colinear equation and the least difference between the re-project result and an actual image was regarded as the optimizing goal function. Finally

the iterative method was used to improve the precision of the attitude parameter of a target. Experimental results show that the measuring error of the attitude angle is less than 0.1 ? when the axis of the plane imaging is more than 500 pixels. As compared with the middle axis method and the direction vector method of angle bisector lines

proposed method has a correct mathematical model

reasonable algorithm and can improve effectively the measurement precision of the plane.

关键词

Keywords

references

赵学颜,李迎春.靶场光学测量[M]. 北京:国防工业出版社,2001. ZHAO X Y,LI Y CH. Optical Measurement at Shooting Range[M].Beijing: National Defense Press,2001.(in Chinese)

刘利生.外测数据事后处理[M]. 北京:国防工业出版社,2000. LIU L SH. Post-Flight Data Processing of Trajectory Measurement[M].Beijing: National Defense Press,2000.(in Chinese)

何照才.光电测量[M]. 北京:国防工业出版社,2002. HE ZH C. Optical and Electrical Measurement[M].Beijing: National Defense Press,2002.(in Chinese)

HOM B K P,HILDEN H M,NEGAHDARIPOUR S. Closed-form solution of absolute orientation using orthonormal matrices[J].Journal of the Optical Society of America,1988,A5:1127-1135.

HOM B K P. Closed-form solution of absolute orientation using unit quaternions[J]. Journal of the Optical Society of America, 1987,A4:629-642.

JI Q, COSTA M S,HARALICK R M,et al.. A robust linear least-squares estimation of camera exterior orientation using multiple geometric features[J]. ISPRS Journal of Photogrammetry and Remote Sensing,2000,52(2):75-93.

YU J Y,MCMILLAN L. General linear cameras[J].European Conference on Computer Vision, 2004,2:14-27.

CHEN C,SCHONFELD D,MOHAMED M. Robust pose estimation based on Sylvester’s equation: single and multiple collaborative cameras[J]. IEEE International Conference on Speech and Signal Processing (ICASSP), 2008:1085-1088.

KAHL F. Multiple view geometry and the l-infinitynorm[J].Proceedings of the International Conference on Computer Vision, 2005,2:1002-1009.

AGARWAL S, CHANDRAKAR M,KAHL F,et al.. Practical global optimization for multiview geometry[J]. European Conference on Computer Vision, 2006,3951:592-605.

王习文,马军,陈娟,等. 飞机三维姿态测量的角平分线方向向量法[J]. 光学精密工程,2010,2(18):369-376. WANG X W, MA J, CHEN J,et al.. Direction vector method of angle bisector lines for measuring aircraft’s 3D attitude[J].Opt. Precision Eng.,2010,2(18):369-376. (in Chinese)

赵立荣,柳玉晗,朱玮,等. 飞机姿态单站余弦及多站面面交汇方法研究[J]. 光学精密工程,2009,8(11):20-23. ZHAO L R, LIU Y H,ZHU W, et al.. Measurement of aircraft attitude by spatial cosine relationship in single-station and planes to intersection in multi-station of electro-optical theodolite[J]. Opt. Precision Eng., 2009,8(11):20-23. (in Chinese)

朱玮,赵立荣,柳玉晗,等. 光电经纬仪子母弹多目标提取方法的研究[J]. 光学精密工程,2008,16(11):2140-2144. ZHU W, ZHAO L R,LIU Y H, et al.. The extraction method for missile bullets’ multiple targets of optical-electronictheodolite[J]. Opt. Precision Eng., 2008,16(11):2140-2144. (in Chinese)

浏览量

471

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

暂无数据